[U-Boot] [PATCH v2 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Heiko Schocher
hs at denx.de
Mon Sep 26 07:43:44 CEST 2011
Hello Paulraj,
Paulraj, Sandeep wrote:
>
>> - booting from NOR Flash with direct boot method
>> - POST support
>> - LOGBUF support
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>> Cc: Paulraj Sandeep <s-paulraj at ti.com>
>> Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
>> Cc: Igor Grinberg <grinberg at compulab.co.il>
>> ---
>> - changes for v2
>> - use CONFIG_MACH_TYPE instead setting the MACH_TYPE in
>> board specific code, as Igor Grinberg suggested.
>> - add logversion=2 to default Environment
>>
>> board/enbw/enbw_cmc/Makefile | 51 ++++
>> board/enbw/enbw_cmc/enbw_cmc.c | 570
>> ++++++++++++++++++++++++++++++++++++++++
>> boards.cfg | 1 +
>> include/configs/enbw_cmc.h | 443 +++++++++++++++++++++++++++++++
>> 4 files changed, 1065 insertions(+), 0 deletions(-)
>> create mode 100644 board/enbw/enbw_cmc/Makefile
>> create mode 100644 board/enbw/enbw_cmc/enbw_cmc.c
>> create mode 100644 include/configs/enbw_cmc.h
>>
>
> Heiko,
>
> I applied all your patches and MAKEALL returned a failure for only the enbw_cmc board.
>
> Can you please take a look?
>
> Because of this I have not applied this to u-boot-ti.
Hmm.. just did a rebase to TOT and I see with all my patches:
[hs at pollux u-boot]$ ./MAKEALL enbw_cmc
Configuring for enbw_cmc board...
text data bss dec hex filename
407034 8576 257656 673266 a45f2 ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 1
----------------------------------------------------------
[hs at pollux u-boot]$
Did you apllied all patches, as stated here?:
http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/108514
How looks your compile error?
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list