[U-Boot] [PATCH 1/2] powerpc/p2041rdb: updated description of cpld command

Kumar Gala galak at kernel.crashing.org
Fri Sep 23 19:54:49 CEST 2011


From: Shaohui Xie <Shaohui.Xie at freescale.com>

According to CPLD 2.2, the default configuration is changed, so updated the
description of CPLD command, otherwise it will confusing.

Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 board/freescale/p2041rdb/cpld.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c
index 37b0ed5..2ad89a8 100644
--- a/board/freescale/p2041rdb/cpld.c
+++ b/board/freescale/p2041rdb/cpld.c
@@ -159,14 +159,14 @@ U_BOOT_CMD(
 	"cpld_cmd watchdog <watchdog_period> - set the watchdog period\n"
 	"	period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n"
 	"cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n"
-	"	lane 6: 0 -> slot1 (Default)\n"
-	"		1 -> SGMII\n"
-	"	lane a: 0 -> slot2 (Default)\n"
-	"		1 -> AURORA\n"
-	"	lane c: 0 -> slot2 (Default)\n"
-	"		1 -> SATA0\n"
-	"	lane d: 0 -> slot2 (Default)\n"
-	"		1 -> SATA1\n"
+	"	lane 6: 0 -> slot1\n"
+	"		1 -> SGMII (Default)\n"
+	"	lane a: 0 -> slot2\n"
+	"		1 -> AURORA (Default)\n"
+	"	lane c: 0 -> slot2\n"
+	"		1 -> SATA0 (Default)\n"
+	"	lane d: 0 -> slot2\n"
+	"		1 -> SATA1 (Default)\n"
 #ifdef DEBUG
 	"cpld_cmd dump - display the CPLD registers\n"
 #endif
-- 
1.7.3.4



More information about the U-Boot mailing list