[U-Boot] [PATCH] part: show efi partition name when print out partition info

[Marek Vasut]

On Wednesday, September 07, 2011 01:29:35 PM Lei Wen wrote:
> Hi Marek,
> 
> On Wed, Sep 7, 2011 at 7:27 PM, Marek Vasut <marek.vasut at gmail.com> wrote:
> > On Wednesday, September 07, 2011 01:17:03 PM Lei Wen wrote:
> >> Previous output:
> >> Marvell>>  mmc part
> >> 
> >> Partition Map for MMC device 1  --   Partition Type: EFI
> >> 
> >> Part  Start LBA  End LBA
> >> gpt1  0x8C00    0xCBFF
> >> gpt2  0xCC00    0x57BFF
> >> gpt3  0x57C00    0xA2BFF
> >> gpt4  0xA2C00    0xECBFDE
> >> 
> >> With the patch, the output becomes:
> >> Marvell>> mmc part
> >> 
> >> Partition Map for MMC device 1  --   Partition Type: EFI
> >> 
> >> Part            Name            Start LBA       End LBA
> >>  1                 ramdisk      0x00008C00      0x0000CBFF
> >>  2                  system      0x0000CC00      0x00057BFF
> >>  3                userdata      0x00057C00      0x000A2BFF
> >>  4               remaining      0x000A2C00      0x00ECBFDE
> >> 
> >> Signed-off-by: Lei Wen <leiwen at marvell.com>
> >> ---
> > 
> > Hi Lei,
> > 
> > what about aligning the Name to the left ?
> 
> You mean like below?
> Name       Part     Start LBA       End LBA

Like "ramdisk" "system" etc. starting at the same column

> 
> Best regards,
> Lei