[U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
Kumar Gala
kumar.gala at freescale.com
Fri Sep 16 16:57:06 CEST 2011
On Aug 26, 2011, at 1:32 PM, York Sun wrote:
> Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c.
> The unified driver can initialize data using DDR controller. No need to
> use DMA if just to initialze for ECC.
>
> Signed-off-by: York Sun <yorksun at freescale.com>
> Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
> ---
> board/freescale/mpc8349emds/Makefile | 1 +
> board/freescale/mpc8349emds/ddr.c | 107 +++++++++++++++++++++++++++++
> board/freescale/mpc8349emds/mpc8349emds.c | 26 ++++---
> include/configs/MPC8349EMDS.h | 16 ++++
> 4 files changed, 139 insertions(+), 11 deletions(-)
> create mode 100644 board/freescale/mpc8349emds/ddr.c
applied to 85xx 'next'
- k
More information about the U-Boot
mailing list