[U-Boot] [PATCH 1/2] mx31: make HSP clock for mx3fb driver available

[Helmut Raiger]

This additionally updates mx31/generic.c by
- replacing __REG() macro accesses with readl() and writel()
- providing macros for PDR0 and PLL bit accesses
It also fixes a warning about the prototype of imx_get_uartclk(void)

Signed-off-by: Helmut Raiger <helmut.raiger at hale.at>
---
V2: uses macros and readl(), writel(), see commit message

 arch/arm/cpu/arm1136/mx31/generic.c       |   40 +++++++++++++++++++---------
 arch/arm/include/asm/arch-mx31/clock.h    |    3 +-
 arch/arm/include/asm/arch-mx31/imx-regs.h |   14 ++++++++++
 3 files changed, 43 insertions(+), 14 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index 248431b..9a7612b 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -28,10 +28,10 @@
 
 static u32 mx31_decode_pll(u32 reg, u32 infreq)
 {
-	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3ff;
-	u32 mfd = (reg >> 16) & 0x3ff;
-	u32 pd =  (reg >> 26) & 0xf;
+	u32 mfi = GET_PLL_MFI(reg);
+	u32 mfn = GET_PLL_MFN(reg);
+	u32 mfd = GET_PLL_MFD(reg);
+	u32 pd =  GET_PLL_PD(reg);
 
 	mfi = mfi <= 5 ? 5 : mfi;
 	mfd += 1;
@@ -45,12 +45,12 @@ static u32 mx31_get_mpl_dpdgck_clk(void)
 {
 	u32 infreq;
 
-	if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
+	if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
 		infreq = CONFIG_MX31_CLK32 * 1024;
 	else
 		infreq = CONFIG_MX31_HCLK_FREQ;
 
-	return mx31_decode_pll(__REG(CCM_MPCTL), infreq);
+	return mx31_decode_pll(readl(CCM_MPCTL), infreq);
 }
 
 static u32 mx31_get_mcu_main_clk(void)
@@ -64,10 +64,21 @@ static u32 mx31_get_mcu_main_clk(void)
 static u32 mx31_get_ipg_clk(void)
 {
 	u32 freq = mx31_get_mcu_main_clk();
-	u32 pdr0 = __REG(CCM_PDR0);
+	u32 pdr0 = readl(CCM_PDR0);
 
-	freq /= ((pdr0 >> 3) & 0x7) + 1;
-	freq /= ((pdr0 >> 6) & 0x3) + 1;
+	freq /= GET_PDR0_MAX_PODF(pdr0) + 1;
+	freq /= GET_PDR0_IPG_PODF(pdr0) + 1;
+
+	return freq;
+}
+
+/* hsp is the clock for the ipu */
+static u32 mx31_get_hsp_clk(void)
+{
+	u32 freq = mx31_get_mcu_main_clk();
+	u32 pdr0 = readl(CCM_PDR0);
+
+	freq /= GET_PDR0_HSP_PODF(pdr0) + 1;
 
 	return freq;
 }
@@ -77,6 +88,7 @@ void mx31_dump_clocks(void)
 	u32 cpufreq = mx31_get_mcu_main_clk();
 	printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000);
 	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
+	printf("hsp clock     : %dHz\n", mx31_get_hsp_clk());
 }
 
 unsigned int mxc_get_clock(enum mxc_clock clk)
@@ -88,6 +100,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
 	case MXC_CSPI_CLK:
 	case MXC_UART_CLK:
 		return mx31_get_ipg_clk();
+	case MXC_IPU_CLK:
+		return mx31_get_hsp_clk();
 	}
 	return -1;
 }
@@ -104,10 +118,10 @@ void mx31_gpio_mux(unsigned long mode)
 	reg = IOMUXC_BASE + (mode & 0x1fc);
 	shift = (~mode & 0x3) * 8;
 
-	tmp = __REG(reg);
+	tmp = readl(reg);
 	tmp &= ~(0xff << shift);
 	tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
-	__REG(reg) = tmp;
+	writel(tmp, reg);
 }
 
 void mx31_set_pad(enum iomux_pins pin, u32 config)
@@ -118,10 +132,10 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
 	reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
 	field = (pin + 2) % 3;
 
-	l = __REG(reg);
+	l = readl(reg);
 	l &= ~(0x1ff << (field * 10));
 	l |= config << (field * 10);
-	__REG(reg) = l;
+	writel(l, reg);
 
 }
 
diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h
index fb035c4..1ea5a47 100644
--- a/arch/arm/include/asm/arch-mx31/clock.h
+++ b/arch/arm/include/asm/arch-mx31/clock.h
@@ -29,10 +29,11 @@ enum mxc_clock {
 	MXC_IPG_CLK,
 	MXC_CSPI_CLK,
 	MXC_UART_CLK,
+	MXC_IPU_CLK
 };
 
 unsigned int mxc_get_clock(enum mxc_clock clk);
-extern u32 imx_get_uartclk();
+extern u32 imx_get_uartclk(void);
 extern void mx31_gpio_mux(unsigned long mode);
 extern void mx31_set_pad(enum iomux_pins pin, u32 config);
 
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 3c8d607..c24dae2 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -518,6 +518,20 @@ enum iomux_pins {
 #define PLL_MFI(x)		(((x) & 0xf) << 10)
 #define PLL_MFN(x)		(((x) & 0x3ff) << 0)
 
+#define GET_PDR0_CSI_PODF(x)	(((x) >> 23) & 0x1ff)
+#define GET_PDR0_PER_PODF(x)	(((x) >> 16) & 0x1f)
+#define GET_PDR0_HSP_PODF(x)	(((x) >> 11) & 0x7)
+#define GET_PDR0_NFC_PODF(x)	(((x) >> 8) & 0x7)
+#define GET_PDR0_IPG_PODF(x)	(((x) >> 6) & 0x3)
+#define GET_PDR0_MAX_PODF(x)	(((x) >> 3) & 0x7)
+#define GET_PDR0_MCU_PODF(x)	((x) & 0x7)
+
+#define GET_PLL_PD(x)		(((x) >> 26) & 0xf)
+#define GET_PLL_MFD(x)		(((x) >> 16) & 0x3ff)
+#define GET_PLL_MFI(x)		(((x) >> 10) & 0xf)
+#define GET_PLL_MFN(x)		(((x) >> 0) & 0x3ff)
+
+
 #define WEIM_ESDCTL0	0xB8001000
 #define WEIM_ESDCFG0	0xB8001004
 #define WEIM_ESDCTL1	0xB8001008
-- 
1.7.4.4



--
Scanned by MailScanner.