[U-Boot] [PATCH v2] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
philip at balister.org
Sun Sep 11 18:38:14 CEST 2011
I see I should have copied a maintainer on this patch. Which tree will
this sort of path go upstream via? It seems like my choices are ARM of
OMAP3.
I've got a number of other patches that should go upstream that are
Overo centric. In general, what route should they take upstream?
Philip
On 09/09/2011 03:16 AM, Enric Balletbò i Serra wrote:
> 2011/9/9 Philip Balister<philip at balister.org>:
>> The existing timing does not quite meet the minimum requirements
>> in the LAN9221 datasheet. The timing in this patch solves problems
>> noticed on some parts. The patch also combines the CS configuration
>> for the overo and igep0020 boards per request.
>>
>> Signed-off-by: Philip Balister<philip at opensdr.com>
>> ---
>> Changes for v2: Added igep0020 board per Enric Balletbò i Serra. Compile
>> tested only.
>>
>> arch/arm/include/asm/arch-omap3/omap_gpmc.h | 9 +++++++++
>> board/isee/igep0020/igep0020.c | 1 +
>> board/isee/igep0020/igep0020.h | 9 ---------
>> board/overo/overo.c | 1 +
>> board/overo/overo.h | 9 ---------
>> 5 files changed, 11 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
>> index bd22bce..800e4ee 100644
>> --- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h
>> +++ b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
>> @@ -80,4 +80,13 @@
>> }
>> #endif
>>
>> +/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
>> +#define NET_LAN9221_GPMC_CONFIG1 0x00001000
>> +#define NET_LAN9221_GPMC_CONFIG2 0x00060700
>> +#define NET_LAN9221_GPMC_CONFIG3 0x00020201
>> +#define NET_LAN9221_GPMC_CONFIG4 0x06000700
>> +#define NET_LAN9221_GPMC_CONFIG5 0x0006090A
>> +#define NET_LAN9221_GPMC_CONFIG6 0x87030000
>> +#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
>> +
>> #endif /* __ASM_ARCH_OMAP_GPMC_H */
>> diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
>> index 36cc924..a5210c9 100644
>> --- a/board/isee/igep0020/igep0020.c
>> +++ b/board/isee/igep0020/igep0020.c
>> @@ -29,6 +29,7 @@
>> #include<asm/arch/mmc_host_def.h>
>> #include<asm/arch/mux.h>
>> #include<asm/arch/sys_proto.h>
>> +#include<asm/arch/omap_gpmc.h>
>> #include<asm/mach-types.h>
>> #include "igep0020.h"
>>
>> diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
>> index c08d758..3d6e15f 100644
>> --- a/board/isee/igep0020/igep0020.h
>> +++ b/board/isee/igep0020/igep0020.h
>> @@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
>> "ONENAND",
>> };
>>
>> -/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
>> -#define NET_LAN9221_GPMC_CONFIG1 0x00001000
>> -#define NET_LAN9221_GPMC_CONFIG2 0x00080701
>> -#define NET_LAN9221_GPMC_CONFIG3 0x00020201
>> -#define NET_LAN9221_GPMC_CONFIG4 0x08030703
>> -#define NET_LAN9221_GPMC_CONFIG5 0x00060908
>> -#define NET_LAN9221_GPMC_CONFIG6 0x87030000
>> -#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
>> -
>> static void setup_net_chip(void);
>>
>> /*
>> diff --git a/board/overo/overo.c b/board/overo/overo.c
>> index 4eafdb1..bcd7d62 100644
>> --- a/board/overo/overo.c
>> +++ b/board/overo/overo.c
>> @@ -37,6 +37,7 @@
>> #include<asm/arch/mem.h>
>> #include<asm/arch/sys_proto.h>
>> #include<asm/arch/gpio.h>
>> +#include<asm/arch/omap_gpmc.h>
>> #include<asm/mach-types.h>
>> #include "overo.h"
>>
>> diff --git a/board/overo/overo.h b/board/overo/overo.h
>> index 68e1243..57f2457 100644
>> --- a/board/overo/overo.h
>> +++ b/board/overo/overo.h
>> @@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {
>> #endif
>> };
>>
>> -/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
>> -#define NET_LAN9221_GPMC_CONFIG1 0x00001000
>> -#define NET_LAN9221_GPMC_CONFIG2 0x00080701
>> -#define NET_LAN9221_GPMC_CONFIG3 0x00020201
>> -#define NET_LAN9221_GPMC_CONFIG4 0x08030703
>> -#define NET_LAN9221_GPMC_CONFIG5 0x00060908
>> -#define NET_LAN9221_GPMC_CONFIG6 0x87030000
>> -#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
>> -
>> /*
>> * IEN - Input Enable
>> * IDIS - Input Disable
>> --
>> 1.7.4.4
>>
>>
>
> Tested on igep0020 machine (aka IGEP v2). Thanks Philip
>
> Acked-by: Enric Balletbo i Serra<eballetbo at gmail.com>
> Tested-by: Enric Balletbo i Serra<eballetbo at gmail.com>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list