[U-Boot] [PATCH] OMAP3: Overo: Update GPMC timing for ethernet chip.
Philip Balister
philip at balister.org
Wed Sep 7 13:57:49 CEST 2011
The existing timing does not quite meet the minimum requirements
in the LAN9221 datasheet. The timing in this patch solves problems
noticed on some parts.
Signed-off-by: Philip Balister <philip at opensdr.com>
---
board/overo/overo.h | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 68e1243..617c0c3 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -35,10 +35,10 @@ const omap3_sysinfo sysinfo = {
/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
#define NET_LAN9221_GPMC_CONFIG1 0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 0x00080701
+#define NET_LAN9221_GPMC_CONFIG2 0x00060700
#define NET_LAN9221_GPMC_CONFIG3 0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 0x00060908
+#define NET_LAN9221_GPMC_CONFIG4 0x06000700
+#define NET_LAN9221_GPMC_CONFIG5 0x0006090A
#define NET_LAN9221_GPMC_CONFIG6 0x87030000
#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
--
1.7.4.4
More information about the U-Boot
mailing list