[U-Boot] [PATCH 6/9] powerpc/mpc8548cds: Update config file

Zhao Chenhui chenhui.zhao at freescale.com
Tue Sep 13 09:15:28 CEST 2011


From: chenhui zhao <chenhui.zhao at freescale.com>

-Increase the size of malloc space.
-Enable e1000 network card.
-Change the location of env address.
-Use hwconfig to turn off ECC.

Signed-off-by: Zhao Chenhui <chenhui.zhao at freescale.com>
---
 include/configs/MPC8548CDS.h |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 64745e1..2760af0 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -86,6 +86,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 
+#define CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
@@ -162,6 +163,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
+#define CONFIG_HWCONFIG			/* enable hwconfig */
 
 /*
  * SDRAM on the Local Bus
@@ -276,7 +278,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX	2
@@ -382,6 +384,7 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
+#define CONFIG_E1000			/* Define e1000 pci Ethernet card */
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 
@@ -430,8 +433,12 @@ extern unsigned long get_clock_freq(void);
  * Environment
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR	0xfff80000
+#else
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* 128K for env */
 #define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
@@ -532,6 +539,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "hwconfig=fsl_ddr:ecc=off\0"			\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
  "tftpflash=tftpboot $loadaddr $uboot; "			\
-- 
1.6.4.1




More information about the U-Boot mailing list