[U-Boot] [PATCH v2 1/2] ARM: mx25: Print the silicon revison
Fabio Estevam
fabio.estevam at freescale.com
Fri Sep 2 17:38:54 CEST 2011
Print the silicon revison during boot.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Handle the unkown silicon revision in the same way as for mx31.
arch/arm/cpu/arm926ejs/mx25/generic.c | 32 +++++++++++++++++++++++++++-
arch/arm/include/asm/arch-mx25/imx-regs.h | 3 ++
2 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 76e4b5c..dca8d98 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -105,12 +105,40 @@ ulong imx_get_perclk (int clk)
return lldiv (fref, div);
}
+
+u32 get_cpu_rev(void)
+{
+ u32 srev;
+ u32 system_rev = 0x25000;
+
+ /* read SREV register from IIM module */
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ srev = readl(&iim->iim_srev);
+
+ switch (srev) {
+ case 0x00:
+ system_rev |= CHIP_REV_1_0;
+ break;
+ case 0x01:
+ system_rev |= CHIP_REV_1_1;
+ break;
+ default:
+ system_rev |= 0x8000;
+ break;
+ }
+
+ return system_rev;
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
char buf[32];
-
- printf ("CPU: Freescale i.MX25 at %s MHz\n\n",
+ u32 cpurev = get_cpu_rev();
+
+ printf("CPU: Freescale i.MX25 rev%d.%d%s at %s MHz\n\n",
+ (cpurev & 0xF0) >> 4, (cpurev & 0x0F),
+ ((cpurev & 0x8000) ? " unknown" : ""),
strmhz (buf, imx_get_armclk ()));
return 0;
}
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 7e34050..d0c6d00 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -352,4 +352,7 @@ struct aips_regs {
#define GPIO3_BASE_ADDR IMX_GPIO3_BASE
#define GPIO4_BASE_ADDR IMX_GPIO4_BASE
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+
#endif /* _IMX_REGS_H */
--
1.7.1
More information about the U-Boot
mailing list