[U-Boot] [PATCH] mx31pdk: Remove board config.mk file

Stefano Babic sbabic at denx.de
Fri Sep 9 18:04:12 CEST 2011


On 09/09/2011 05:38 PM, Fabio Estevam wrote:
> config.mk files should not be used in board level directory.
> 
> Remove this file and also use CONFIG_SYS_TEXT_BASE_SPL, which is the
> correct base address for the SPL case.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Hi Fabio,

> ---
>  board/freescale/mx31pdk/config.mk         |    5 -----
>  nand_spl/board/freescale/mx31pdk/Makefile |    3 ++-
>  2 files changed, 2 insertions(+), 6 deletions(-)
>  delete mode 100644 board/freescale/mx31pdk/config.mk
> 
> diff --git a/board/freescale/mx31pdk/config.mk b/board/freescale/mx31pdk/config.mk
> deleted file mode 100644
> index de2c642..0000000
> --- a/board/freescale/mx31pdk/config.mk
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -ifdef CONFIG_NAND_SPL
> -CONFIG_SYS_TEXT_BASE = 0x87ec0000
> -else
> -CONFIG_SYS_TEXT_BASE = 0x87f00000
> -endif
> diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
> index e6ec10a..a5dc0ce 100644
> --- a/nand_spl/board/freescale/mx31pdk/Makefile
> +++ b/nand_spl/board/freescale/mx31pdk/Makefile
> @@ -1,4 +1,5 @@
>  CONFIG_NAND_SPL	= y
> +CONFIG_SYS_TEXT_BASE_SPL := 0x87ec0000
>  
>  include $(TOPDIR)/config.mk
>  include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
> @@ -6,7 +7,7 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
>  nandobj	:= $(OBJTREE)/nand_spl/
>  
>  LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
> -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
> +LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
>  	   $(LDFLAGS_FINAL)
>  AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
>  CFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL

It sounds good. I'll wait only a couple of days for comments, then I
will merge into u-boot-imx.

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list