[U-Boot] [PATCH 3/3] powerpc/85xx: use fdt_create_phandle() to create the Fman firmware phandles

[Timur Tabi]

Function fdt_create_phandle() conveniently creates new phandle properties
using both "linux,phandle" and "phandle", so it should be used by all code
that wants to create a phandle.

The Fman firmware code, which embeds an Fman firmware into the device tree,
was creating the phandle properties manually.  Instead, change it to use
fdt_create_phandle().

Signed-off-by: Timur Tabi <timur at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/fdt.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index d20c94c..9d2d769 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -504,9 +504,8 @@ void fdt_fixup_fman_firmware(void *blob)
 		       fdt_strerror(rc));
 		return;
 	}
-	phandle = fdt_alloc_phandle(blob);
-	rc = fdt_setprop_cell(blob, fwnode, "linux,phandle", phandle);
-	if (rc < 0) {
+	phandle = fdt_create_phandle(blob, fwnode);
+	if (!phandle) {
 		char s[64];
 		fdt_get_path(blob, fwnode, s, sizeof(s));
 		printf("Could not add phandle property to node %s: %s\n", s,
-- 
1.7.4.4