[U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri Sep 30 22:09:25 CEST 2011
Hi Wolfgang,
I have moved the contents of u-boot-arm/next to u-boot-arm/master, and
therefore...
The following changes since commit 1d5e7fb403257d62f0f2419cb83fdf6b0f02f215:
Prepare v2011.09 (2011-09-29 21:11:15 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Ajay Bhargav (5):
gpio: Add GPIO driver framework for Marvell SoCs
gpio: Add GPIO driver for Marvell SoC Armada100
net: Adds Fast Ethernet Controller driver for Armada100
Armada100: Enable Ethernet support for GplugD
Armada100: Enable 88E3015 PHY support for GplugD
Aneesh V (1):
omap4: update maintainer for omap4 boards
Balaji T K (2):
mmc: omap: enable high capacity
mmc: omap: config VMMC, MMC1_PBIAS
Fabio Estevam (25):
ARM: mx25: Print the silicon revison
ARM: mx25: Print the source of reset
MX31: mx31pdk: Remove nand_spl config.mk file
MX31: Improve readability for reset cause
mx31pdk: Change the prompt as per other i.MX boards
MX25: tx25: Avoid the usage of extern in C file
MX25: Add initial support for MX25PDK
MX31: Disable watchdog during low-power modes
mx31pdk: Remove dram_init_banksize()
mx25pdk: Remove dram_init_banksize()
mx31ads: Remove dram_init_banksize()
imx31_litekit: Remove dram_init_banksize()
mx31pdk: Place machine ID into board config
mx25pdk: Place machine ID into board config
mx31ads: Place machine ID into board config
imx31_litekit: Place machine ID into board config
mx51evk: Place machine ID into board config
mx53loco: Place machine ID into board config
mx53smd: Place machine ID into board config
mx53ard: Place machine ID into board config
mx53evk: Place machine ID into board config
zmx25: Remove dram_init_banksize()
zmx25: Place machine ID into board config
zmx25: Fix build warning due to 'get_reset_cause' defined but not
used
vision2: Place machine ID into board config
Heiko Schocher (16):
i2c, davinci: add i2c set speed
net, davinci_emac: add KSZ8864 switch
net, davinci_emac: make less verbose - turn printf() into debug()
net, davinci_emac: let the EMAC detect the PHYs
arm, davinci: move davinci_timer in header file
arm, davinci: add missing timer baseaddresses for !DA8xx cpu
arm, davinci: add internal WDT support for AM1808 cpus
arm, davinci: add RTC base addr
rtc, davinci: add support for davinci internal RTC
arm, davinci: add SYSCFG1 base and register struct
arm, davinci: add some missing defines in hardware.h
arm, davinci, am1808, gpio: add missing defines for bank 8
arm, davinci: add ddr2 definition
arm, davinci: add NOR Boot Configuration Word
arm, davinci, am1808: add lowlevel functions for booting from NOR
arm, davinci, da8xx: add cpuinfo
Jason Liu (1):
cosmetic: fsl_pmic: cosmetic for the help message
Joe Hershberger (1):
omap4_panda: Ignore omap4 SPL called MLO
Marek Vasut (19):
EfikaMX: Adjust undocumented magic constant in config file
FEC: Use proper accessor to read register in debug call
FEC: Use defined constant instead of magic number
FEC: Kill mode select FIXME's
FEC: Add RMII mode support
FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE
FEC: Abstract access to fec->eth in MII operations
FEC: Allow multiple FECes
FEC: Allow registering MII postconfiguration callback
FEC: Add timeout for chip reset
FEC: Squish "got MAC from fuse" message, make it debug()
FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
MX5: Modify the PLL decoding algorithm
MX5: Add AHB clock reporting and fix IPG clock reporting
MX5: Clean up the output of "clocks" command
I2C: mxc_i2c rework
ATA: Squash warnings in mxc_ata.
EfikaMX: Add imximage config for Efika SB
EfikaSB: Add preliminary EfikaSB support
Philip Balister (2):
OMAP3: Overo: Update GPMC timing for ethernet chip
overo: Set IEN on GPMC_CLK to support synchronous clocking.
Sandeep Paulraj (1):
devkit8000: Fix build break
Sanjeev Premi (2):
omap3: Fix compile warning
omap3evm: env: Fix default console
Simon Schwarz (9):
omap-common/omap4: relocate early UART clock setup
omap3: Configure RAM bank 0 if in SPL
omap-common: add nand spl support
spl: add NAND Library to new SPL
spl: Add POWER library to new spl
omap3: new SPL structure support
devkit8000: Add nand-spl support for new SPL
omap3: implement boot parameter saving
omap-common: reorganize spl.c
Thomas Weber (1):
Devkit8000: Change console from ttyS2 to ttyO2
.gitignore | 1 +
MAINTAINERS | 9 +-
arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
arch/arm/cpu/arm1136/mx31/timer.c | 4 +-
arch/arm/cpu/arm926ejs/davinci/Makefile | 3 +-
arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 ++++++++++++
arch/arm/cpu/arm926ejs/davinci/cpu.c | 16 +-
arch/arm/cpu/arm926ejs/davinci/ksz8873.c | 68 ++
arch/arm/cpu/arm926ejs/davinci/timer.c | 46 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 53 ++-
arch/arm/cpu/arm926ejs/start.S | 9 +
arch/arm/cpu/armv7/mx5/clock.c | 114 +++-
arch/arm/cpu/armv7/omap-common/Makefile | 6 +
arch/arm/cpu/armv7/omap-common/spl.c | 165 +----
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 150 ++++
arch/arm/cpu/armv7/omap-common/spl_nand.c | 71 ++
arch/arm/cpu/armv7/omap3/board.c | 50 ++-
arch/arm/cpu/armv7/omap3/config.mk | 30 +
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 +
arch/arm/cpu/armv7/omap3/sdrc.c | 32 +-
arch/arm/cpu/armv7/omap3/sys_info.c | 2 +-
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/include/asm/arch-armada100/armada100.h | 58 ++
arch/arm/include/asm/arch-armada100/gpio.h | 48 ++
arch/arm/include/asm/arch-armada100/mfp.h | 19 +
.../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 ++
arch/arm/include/asm/arch-davinci/ddr2_defs.h | 96 +++
arch/arm/include/asm/arch-davinci/emac_defs.h | 6 +
arch/arm/include/asm/arch-davinci/gpio.h | 2 +
arch/arm/include/asm/arch-davinci/hardware.h | 30 +
arch/arm/include/asm/arch-davinci/timer_defs.h | 44 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 4 +-
arch/arm/include/asm/arch-mx25/sys_proto.h | 29 +
arch/arm/include/asm/arch-mx27/imx-regs.h | 1 -
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 -
arch/arm/include/asm/arch-mx5/crm_regs.h | 11 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 5 +-
arch/arm/include/asm/arch-omap3/mem.h | 36 +
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 9 +
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/arch-omap4/omap4.h | 8 +-
arch/arm/include/asm/omap_common.h | 31 +
board/Marvell/gplugd/gplugd.c | 71 ++
board/efikamx/efikamx.c | 124 +++-
board/efikamx/{imximage.cfg => imximage_mx.cfg} | 0
board/efikamx/{imximage.cfg => imximage_sb.cfg} | 26 +-
board/freescale/mx25pdk/Makefile | 49 ++
board/freescale/mx25pdk/imximage.cfg | 73 ++
board/freescale/mx25pdk/lowlevel_init.S | 21 +
board/freescale/mx25pdk/mx25pdk.c | 56 ++
board/freescale/mx31ads/mx31ads.c | 7 -
board/freescale/mx31pdk/mx31pdk.c | 7 -
board/freescale/mx51evk/mx51evk.c | 1 -
board/freescale/mx53ard/mx53ard.c | 1 -
board/freescale/mx53evk/mx53evk.c | 1 -
board/freescale/mx53loco/mx53loco.c | 1 -
board/freescale/mx53smd/mx53smd.c | 1 -
board/isee/igep0020/igep0020.c | 1 +
board/isee/igep0020/igep0020.h | 9 -
board/karo/tx25/tx25.c | 3 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 7 -
board/overo/overo.c | 1 +
board/overo/overo.h | 11 +-
board/syteco/zmx25/zmx25.c | 8 -
board/timll/devkit8000/devkit8000.c | 2 +-
board/ttcontrol/vision2/vision2.c | 1 -
boards.cfg | 5 +-
doc/README.SPL | 2 +
doc/README.davinci | 9 +
drivers/block/mxc_ata.c | 22 +-
drivers/gpio/Makefile | 1 +
drivers/gpio/mvgpio.c | 115 +++
drivers/gpio/mvgpio.h | 74 ++
drivers/i2c/davinci_i2c.c | 5 +
drivers/i2c/mxc_i2c.c | 422 ++++++++----
drivers/misc/fsl_pmic.c | 2 +-
drivers/mmc/omap_hsmmc.c | 34 +-
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 245 +++++++
drivers/mtd/nand/omap_gpmc.c | 27 +
drivers/net/Makefile | 1 +
drivers/net/armada100_fec.c | 736
++++++++++++++++++++
drivers/net/armada100_fec.h | 232 ++++++
drivers/net/davinci_emac.c | 12 +-
drivers/net/fec_mxc.c | 170 +++--
drivers/net/fec_mxc.h | 9 +-
drivers/power/twl6030.c | 7 +
drivers/rtc/Makefile | 1 +
drivers/rtc/davinci.c | 125 ++++
include/configs/devkit8000.h | 48 ++-
include/configs/efikamx.h | 6 +-
include/configs/gplugd.h | 30 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/mx25pdk.h | 108 +++
include/configs/mx31ads.h | 2 +
include/configs/mx31pdk.h | 4 +-
include/configs/mx51evk.h | 1 +
include/configs/mx53ard.h | 2 +
include/configs/mx53evk.h | 2 +
include/configs/mx53loco.h | 2 +
include/configs/mx53smd.h | 4 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omap4_common.h | 2 +
include/configs/omap4_sdp4430.h | 2 +
include/configs/vision2.h | 2 +
include/configs/zmx25.h | 1 +
include/nand.h | 6 +
include/netdev.h | 8 +-
include/twl6030.h | 3 +
nand_spl/board/freescale/mx31pdk/Makefile | 2 +-
nand_spl/board/freescale/mx31pdk/config.mk | 1 -
spl/Makefile | 2 +
114 files changed, 4237 insertions(+), 515 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/ksz8873.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_mmc.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
create mode 100644 arch/arm/include/asm/arch-armada100/gpio.h
create mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
create mode 100644 arch/arm/include/asm/arch-davinci/ddr2_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/timer_defs.h
create mode 100644 arch/arm/include/asm/arch-mx25/sys_proto.h
copy board/efikamx/{imximage.cfg => imximage_mx.cfg} (100%)
rename board/efikamx/{imximage.cfg => imximage_sb.cfg} (90%)
create mode 100644 board/freescale/mx25pdk/Makefile
create mode 100644 board/freescale/mx25pdk/imximage.cfg
create mode 100644 board/freescale/mx25pdk/lowlevel_init.S
create mode 100644 board/freescale/mx25pdk/mx25pdk.c
create mode 100644 drivers/gpio/mvgpio.c
create mode 100644 drivers/gpio/mvgpio.h
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
create mode 100644 drivers/net/armada100_fec.c
create mode 100644 drivers/net/armada100_fec.h
create mode 100644 drivers/rtc/davinci.c
create mode 100644 include/configs/mx25pdk.h
delete mode 100644 nand_spl/board/freescale/mx31pdk/config.mk
Amicalement,
--
Albert.
More information about the U-Boot
mailing list