[U-Boot] [PATCH] overo: Set IEN on GPMC_CLK to support CS's that use synchronous clocking.

[Philip Balister]

Without this change CS's configured for synchronous clocking cannot
read data.

Signed-off-by: Philip Balister <philip at opensdr.com>
---
 board/overo/overo.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/overo/overo.h b/board/overo/overo.h
index 68e1243..1f94669 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -128,7 +128,7 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS6*/\
 	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M0)) /*GPMC_nCS7*/\
 	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nCS3*/\
-	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) /*GPMC_CLK*/\
+	MUX_VAL(CP(GPMC_CLK),		(IEN  | PTU | EN  | M0)) /*GPMC_CLK*/\
 	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
 	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
 	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-- 
1.7.4.4