[U-Boot] The command "nand write.yaffs" is not working correctly

[Peter Pan]

Thank you, Zhengxiong.

The patch seems reasonable. My nand flash has no bad block currently. That
need_skip will skip the oob write part.

I will check that after the golden holiday.
在 2011-9-30 下午5:10，"Jin Zhengxiong-R64188" <R64188 at freescale.com>写道：
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
On
>> Behalf Of Peter Pan
>> Sent: Wednesday, September 21, 2011 9:09 AM
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] The command "nand write.yaffs" is not working correctly
>>
>> I'm recently facing a yaffs2 image write problem in u-boot.
>>
>> In u-boot console, I write the yaffs2 image in ram to an already erased
nand
>> flash with command "nand write.yaffs ${loadaddr} ${nandrootoffset}
${filesize}".
>> After that, if I boot using a ramdisk and mount that yaffs2 partition, I
can
>> only see a folder of "lost+fount". I seems nothing has been written into
that
>> partition.
>>
>> But if now I write this image using "nandwrite -a -o /dev/mtd4
yaffs2.img" and
>> mount that partition, it's working.
>>
>> Anyone met that problem already? Or if I did anything wrong?
>
> [Jin Zhengxiong-R64188]
> I once met the similar issue with 2011.03 base and fixed it with following
patch, But
> I didn't do a detail checking for that, FYI...
>
> @@ -499,6 +499,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t
offset, size_t *length,
> return -EINVAL;
> }
>
> +#ifndef CONFIG_CMD_NAND_YAFFS
> if (!need_skip) {
> rval = nand_write (nand, offset, length, buffer);
> if (rval == 0)
> @@ -509,13 +510,12 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t
offset, size_t *length,
> offset, rval);
> return rval;
> }
> -
> +#endif
> while (left_to_write > 0) {
> size_t block_offset = offset & (nand->erasesize - 1);
> size_t write_size;
>
> WATCHDOG_RESET ();
> -
> if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
> printf ("Skip bad block 0x%08llx\n",
> offset & ~(nand->erasesize - 1));
> @@ -546,7 +546,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t
offset, size_t *length,
> ops.oobbuf = ops.datbuf + pagesize;
>
> rval = nand->write_oob(nand, offset, &ops);
> - if (!rval)
> + if ( rval != 0)
> break;
>
> offset += pagesize;
>
>