[U-Boot] [PATCH 4/8] MX35: factorize common assembly code

[Stefano Babic]

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 arch/arm/include/asm/arch-mx35/lowlevel_macro.S |  140 +++++++++++++++++++++++
 1 files changed, 140 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S

diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
new file mode 100644
index 0000000..05aa951
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * AIPS setup - Only setup MPROTx registers.
+ * The PACR default values are good.
+ */
+.macro init_aips
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	ldr r0, =AIPS1_BASE_ADDR
+	ldr r1, =AIPS_MPR_CONFIG
+	str r1, [r0, #0x00]
+	str r1, [r0, #0x04]
+	ldr r0, =AIPS2_BASE_ADDR
+	str r1, [r0, #0x00]
+	str r1, [r0, #0x04]
+
+	/*
+	 * Clear the on and off peripheral modules Supervisor Protect bit
+	 * for SDMA to access them. Did not change the AIPS control registers
+	 * (offset 0x20) access type
+	 */
+	ldr r0, =AIPS1_BASE_ADDR
+	ldr r1, =AIPS_OPACR_CONFIG
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	str r1, [r0, #0x50]
+	ldr r0, =AIPS2_BASE_ADDR
+	str r1, [r0, #0x40]
+	str r1, [r0, #0x44]
+	str r1, [r0, #0x48]
+	str r1, [r0, #0x4C]
+	str r1, [r0, #0x50]
+.endm
+
+/* MAX (Multi-Layer AHB Crossbar Switch) setup */
+.macro init_max
+	ldr r0, =MAX_BASE_ADDR
+	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
+	ldr r1, =MAX_MPR_CONFIG
+	str r1, [r0, #0x000]        /* for S0 */
+	str r1, [r0, #0x100]        /* for S1 */
+	str r1, [r0, #0x200]        /* for S2 */
+	str r1, [r0, #0x300]        /* for S3 */
+	str r1, [r0, #0x400]        /* for S4 */
+	/* SGPCR - always park on last master */
+	ldr r1, =MAX_SGPCR_CONFIG
+	str r1, [r0, #0x010]        /* for S0 */
+	str r1, [r0, #0x110]        /* for S1 */
+	str r1, [r0, #0x210]        /* for S2 */
+	str r1, [r0, #0x310]        /* for S3 */
+	str r1, [r0, #0x410]        /* for S4 */
+	/* MGPCR - restore default values */
+	ldr r1, =MAX_MGPCR_CONFIG
+	str r1, [r0, #0x800]        /* for M0 */
+	str r1, [r0, #0x900]        /* for M1 */
+	str r1, [r0, #0xA00]        /* for M2 */
+	str r1, [r0, #0xB00]        /* for M3 */
+	str r1, [r0, #0xC00]        /* for M4 */
+	str r1, [r0, #0xD00]        /* for M5 */
+.endm
+
+/* M3IF setup */
+.macro init_m3if
+	/* Configure M3IF registers */
+	ldr r1, =M3IF_BASE_ADDR
+	/*
+	* M3IF Control Register (M3IFCTL)
+	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
+	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
+	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
+	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
+	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
+	*						------------
+	*						  0x00000040
+	*/
+	ldr r0, =M3IF_CONFIG
+	str r0, [r1]  /* M3IF control reg */
+.endm
+
+.macro core_init
+	mrc 15, 0, r1, c1, c0, 0
+
+	mrc 15, 0, r0, c1, c0, 1
+	orr r0, r0, #7
+	mcr 15, 0, r0, c1, c0, 1
+	orr r1, r1, #(1<<11)
+
+	/* Set unaligned access enable */
+	orr r1, r1, #(1<<22)
+
+	/* Set low int latency enable */
+	orr r1, r1, #(1<<21)
+
+	mcr 15, 0, r1, c1, c0, 0
+
+	mov r0, #0
+
+	/* Set branch prediction enable */
+	mcr 15, 0, r0, c15, c2, 4
+
+	mcr 15, 0, r0, c7, c7, 0        /* invalidate I cache and D cache */
+	mcr 15, 0, r0, c8, c7, 0        /* invalidate TLBs */
+	mcr 15, 0, r0, c7, c10, 4       /* Drain the write buffer */
+
+	/*
+	 * initializes very early AIPS
+	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
+	 * M3IF
+	 * Also setup the Peripheral Port Remap register inside the core
+	 */
+	ldr r0, =0x40000015        /* start from AIPS 2GB region */
+	mcr p15, 0, r0, c15, c2, 4
+.endm
-- 
1.7.1