[U-Boot] [PATCH 2/4] MX5: Add AHB clock reporting and fix IPG clock reporting

[Jason Hui]

Hi, Marek

On Thu, Sep 15, 2011 at 8:09 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> ---
>  arch/arm/cpu/armv7/mx5/clock.c |   36 +++++++++++++++++++++++++++---------
>  1 files changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
> index 9f37f7f..a9fe81c 100644
> --- a/arch/arm/cpu/armv7/mx5/clock.c
> +++ b/arch/arm/cpu/armv7/mx5/clock.c
> @@ -152,18 +152,35 @@ static u32 get_periph_clk(void)
>  }
>
>  /*
> + * Get the rate of ahb clock.
> + */
> +static u32 get_ahb_clk(void)
> +{
> +       uint32_t freq, div, reg;
> +
> +       freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
> +
> +       reg = __raw_readl(&mxc_ccm->cbcdr);
> +       div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
> +                       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
> +
> +       return freq / div;
> +}

This is not correct, ahb clock is not fixed-source from PLL2.

Currently implementation,we did not take care the ahb_bypass clock setting
and don't consider the lp-apm mode for main-bus clock input.

Jason Liu