[U-Boot] [PATCH 00/31] Support for the DENX M28 SoM
Marek Vasut
marek.vasut at gmail.com
Thu Sep 8 22:42:28 CEST 2011
This series adds support for DENX M28 SoM and M28EVK kit.
This series depends on previous series:
* Support for both FEC interfaces on i.MX28
* Random NAND fixes and improvements
Marek Vasut (31):
iMX28: Initial support for iMX28 CPU
iMX28: Add basic support for DENX M28EVK board
iMX28: Add support for SSP MMC
M28EVK: Enable MMC support
iMX28: Add pinctrl and ocotp register definitions
FEC: Add support for iMX28 quirks
iMX28: Add CPU-specific FEC ethernet init
M28EVK: Enable FEC0 and FEC1
iMX28: Add PINMUX control
iMX28: Add RTC register definitions
iMX28: Add I2C register definitions
iMX28: Add I2C bus driver
M28: Enable I2C, EEPROM and RTC
iMX28: Add MMC SPL
M28: Enable MMC SPL
iMX28: Add GPIO control
M28: Enable use of GPIO configurators
iMX28: Add SPI driver
M28EVK: Enable SPI and SPI flash
iMX28: Add APBH DMA driver
iMX28: Add BCH and GPMI register definitions
iMX28: Add GPMI NAND driver
M28: Enable NAND
iMX28: Add driver for internal RTC
M28: Enable the internal RTC instead of the M41T62
M28: Enable UBI and UBIFS
M28: Save environment in NAND
iMX28: Add image header generator tool
M28: Add NAND update scripts
i.MX28: Add u-boot.sb target to Makefile
M28: Add doc/README.m28 documentation
MAINTAINERS | 1 +
Makefile | 5 +
arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
arch/arm/cpu/arm926ejs/mx28/clock.c | 359 +++++++
arch/arm/cpu/arm926ejs/mx28/gpio.c | 108 +++
arch/arm/cpu/arm926ejs/mx28/iomux.c | 111 +++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 172 ++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 143 +++
arch/arm/include/asm/arch-mx28/clock.h | 48 +
arch/arm/include/asm/arch-mx28/dma.h | 170 ++++
arch/arm/include/asm/arch-mx28/gpio.h | 32 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 33 +
arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++
arch/arm/include/asm/arch-mx28/iomux.h | 168 ++++
arch/arm/include/asm/arch-mx28/mx28.h | 32 +
arch/arm/include/asm/arch-mx28/regs-apbh.h | 462 +++++++++
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
arch/arm/include/asm/arch-mx28/regs-bch.h | 226 +++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 308 ++++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 218 +++++
arch/arm/include/asm/arch-mx28/regs-i2c.h | 203 ++++
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 169 ++++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1280 +++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-power.h | 409 ++++++++
arch/arm/include/asm/arch-mx28/regs-rtc.h | 143 +++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 345 +++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 167 ++++
arch/arm/include/asm/arch-mx28/regs-uartdbg.h | 182 ++++
board/denx/m28evk/Makefile | 49 +
board/denx/m28evk/m28evk.c | 200 ++++
boards.cfg | 1 +
doc/README.m28 | 223 +++++
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 693 +++++++++++++
drivers/i2c/Makefile | 1 +
drivers/i2c/mxs_i2c.c | 243 +++++
drivers/mmc/Makefile | 1 +
drivers/mmc/mxsmmc.c | 354 +++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 1163 ++++++++++++++++++++++
drivers/net/fec_mxc.c | 44 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/mxsrtc.c | 88 ++
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 174 ++++
include/configs/m28evk.h | 276 ++++++
mmc_spl/board/denx/m28evk/Makefile | 102 ++
mmc_spl/board/denx/m28evk/m28_init.h | 36 +
mmc_spl/board/denx/m28evk/mem_init.c | 218 +++++
mmc_spl/board/denx/m28evk/mmc_boot.c | 271 ++++++
mmc_spl/board/denx/m28evk/power_init.c | 915 ++++++++++++++++++
mmc_spl/board/denx/m28evk/start.S | 402 ++++++++
mmc_spl/board/denx/m28evk/u-boot.bd | 14 +
mmc_spl/board/denx/m28evk/u-boot.lds | 87 ++
tools/Makefile | 6 +
tools/mxsboot.c | 687 +++++++++++++
57 files changed, 12481 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/gpio.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
create mode 100644 arch/arm/include/asm/arch-mx28/mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-uartdbg.h
create mode 100644 board/denx/m28evk/Makefile
create mode 100644 board/denx/m28evk/m28evk.c
create mode 100644 doc/README.m28
create mode 100644 drivers/dma/apbh_dma.c
create mode 100644 drivers/i2c/mxs_i2c.c
create mode 100644 drivers/mmc/mxsmmc.c
create mode 100644 drivers/mtd/nand/mxs_nand.c
create mode 100644 drivers/rtc/mxsrtc.c
create mode 100644 drivers/spi/mxs_spi.c
create mode 100644 include/configs/m28evk.h
create mode 100644 mmc_spl/board/denx/m28evk/Makefile
create mode 100644 mmc_spl/board/denx/m28evk/m28_init.h
create mode 100644 mmc_spl/board/denx/m28evk/mem_init.c
create mode 100644 mmc_spl/board/denx/m28evk/mmc_boot.c
create mode 100644 mmc_spl/board/denx/m28evk/power_init.c
create mode 100644 mmc_spl/board/denx/m28evk/start.S
create mode 100644 mmc_spl/board/denx/m28evk/u-boot.bd
create mode 100644 mmc_spl/board/denx/m28evk/u-boot.lds
create mode 100644 tools/mxsboot.c
--
1.7.5.4
More information about the U-Boot
mailing list