[U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo

Heiko Schocher hs at denx.de
Thu Sep 15 07:59:39 CEST 2011


Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Paulraj Sandeep <s-paulraj at ti.com>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
 arch/arm/cpu/arm926ejs/davinci/cpu.c |   16 ++++++++++++++--
 1 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
index b705dfd..02819f6 100644
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c
@@ -115,7 +115,18 @@ int clk_get(enum davinci_clk_ids id)
 out:
 	return pll_out;
 }
-#endif /* CONFIG_SOC_DA8XX */
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	printf("Cores: ARM %d MHz",
+			clk_get(DAVINCI_ARM_CLKID) / 1000000);
+	printf("\nDDR:   %d MHz\n",
+			/* DDR PHY uses an x2 input clock */
+			clk_get(0x10001) / 1000000);
+	return 0;
+}
+#endif
+#else /* CONFIG_SOC_DA8XX */
 
 #ifdef CONFIG_DISPLAY_CPUINFO
 
@@ -194,7 +205,8 @@ unsigned int davinci_arm_clk_get()
 	return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
 }
 #endif
-#endif
+#endif /* CONFIG_DISPLAY_CPUINFO */
+#endif /* !CONFIG_SOC_DA8XX */
 
 /*
  * Initializes on-chip ethernet controllers.
-- 
1.7.6



More information about the U-Boot mailing list