[U-Boot] [PATCH v3] ns16550: change to allow 32 bit access to registers

Dave Aldridge fovsoft at gmail.com
Thu Sep 1 13:40:12 CEST 2011


If CONFIG_SYS_NS16550_MEM32 is defined then 32 bit memory
mapped access will be used to read/write the uart registers.

This is especially useful for SoC devices that implement 16550
compatible uarts but that have peripheral access width constraints.

Signed-off-by: Dave Aldridge <fovsoft at gmail.com>
---
Changes for v2:
    - Add endian support

Changes for v3:
    - Use in_be32()/out_be32() and in_le32/out_le32() functions
      to provide endian support

 drivers/serial/ns16550.c |    6 ++++++
 include/ns16550.h        |    2 ++
 2 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8eeb48f..0174744 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -19,6 +19,12 @@
 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED
 #define serial_out(x,y)	outb(x,(ulong)y)
 #define serial_in(y)	inb((ulong)y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
+#define serial_out(x,y) out_be32(y,x)
+#define serial_in(y) 	in_be32(y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
+#define serial_out(x,y) out_le32(y,x)
+#define serial_in(y) 	in_le32(y)
 #else
 #define serial_out(x,y) writeb(x,y)
 #define serial_in(y) 	readb(y)
diff --git a/include/ns16550.h b/include/ns16550.h
index 9ea81e9..d4ffac9 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -23,6 +23,8 @@
 
 #if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0)
 #error "Please define NS16550 registers size."
+#elif defined(CONFIG_SYS_NS16550_MEM32)
+#define UART_REG(x) unsigned int x;
 #elif (CONFIG_SYS_NS16550_REG_SIZE > 0)
 #define UART_REG(x)						   \
 	unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \
-- 
1.7.3.4



More information about the U-Boot mailing list