[U-Boot] [PATCH 8/8] MX35: add support for flea3 board

[Stefano Babic]

On 09/16/2011 01:49 PM, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Fri, Sep 16, 2011 at 6:46 AM, Stefano Babic <sbabic at denx.de> wrote:
>> The flea3 board is a custom board used in automotive.
>> Network (FEC), NOR, NAND and SPI are supported.
>>
>> Signed-off-by: Stefano Babic <sbabic at denx.de>
>> ---
>>  board/flea3/Makefile        |   49 ++++++++
>>  board/flea3/flea3.c         |  254 +++++++++++++++++++++++++++++++++++++++
>>  board/flea3/lowlevel_init.S |   79 ++++++++++++
>>  boards.cfg                  |    1 +
>>  include/configs/flea3.h     |  280 +++++++++++++++++++++++++++++++++++++++++++
>>  5 files changed, 663 insertions(+), 0 deletions(-)
>>  create mode 100644 board/flea3/Makefile
>>  create mode 100644 board/flea3/flea3.c
>>  create mode 100644 board/flea3/lowlevel_init.S
>>  create mode 100644 include/configs/flea3.h
> 
> You missed an entry in MAINTAINERS file.

Ok, thanks - fixed in V2.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================