[U-Boot] [PATCH] MX31: Improve readability for reset cause

[Fabio Estevam]

Currently the reset cause is printed like:
CPU:   Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR

Improve readability by adding a new line like it is done on other i.MX boards.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/arm1136/mx31/generic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index e3a4d1b..c6def5d 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
 {
 	u32 srev = get_cpu_rev();
 
-	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
+	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
 			(srev & 0xF0) >> 4, (srev & 0x0F),
 			((srev & 0x8000) ? " unknown" : ""),
 			mx31_get_mcu_main_clk() / 1000000);
-- 
1.6.0.4