[U-Boot] [PATCH 3/3] arm, davinci: add internal WDT support for AM1808 cpus

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Paulraj Sandeep <s-paulraj at ti.com>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
 arch/arm/cpu/arm926ejs/davinci/timer.c         |   31 ++++++++++++++++++++++++
 arch/arm/include/asm/arch-davinci/timer_defs.h |    4 +++
 2 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
index 2e7ba48..c7bf7a5 100644
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ b/arch/arm/cpu/arm926ejs/davinci/timer.c
@@ -108,3 +108,34 @@ ulong get_tbclk(void)
 {
 	return CONFIG_SYS_HZ;
 }
+
+#ifdef CONFIG_HW_WATCHDOG
+static struct davinci_timer * const wdttimer =
+	(struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE;
+
+/*
+ * See prufw2.pdf for using Timer as a WDT
+ */
+void davinci_hw_watchdog_enable(void)
+{
+	writel(0x0, &wdttimer->tcr);
+	writel(0x0, &wdttimer->tgcr);
+	/* TIMMODE = 2h */
+	writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr);
+	writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12);
+	writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34);
+	writel(2 << 22, &wdttimer->tcr);
+	writel(0x0, &wdttimer->tim12);
+	writel(0x0, &wdttimer->tim34);
+	/* set WDEN bit, WDKEY 0xa5c6 */
+	writel(0xa5c64000, &wdttimer->wdtcr);
+	/* clear counter register */
+	writel(0xda7e4000, &wdttimer->wdtcr);
+}
+
+void davinci_hw_watchdog_reset(void)
+{
+	writel(0xa5c64000, &wdttimer->wdtcr);
+	writel(0xda7e4000, &wdttimer->wdtcr);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-davinci/timer_defs.h b/arch/arm/include/asm/arch-davinci/timer_defs.h
index 2a20e49..53c961e 100644
--- a/arch/arm/include/asm/arch-davinci/timer_defs.h
+++ b/arch/arm/include/asm/arch-davinci/timer_defs.h
@@ -37,4 +37,8 @@ struct davinci_timer {
 	u_int32_t	wdtcr;
 };
 
+#ifdef CONFIG_HW_WATCHDOG
+void davinci_hw_watchdog_enable(void);
+void davinci_hw_watchdog_reset(void);
+#endif
 #endif /* _TIMER_DEFS_H_ */
-- 
1.7.6