[U-Boot] U-Boot build break for m501sk board from Artila
Jamie
jamie at subject2risk.com
Tue Sep 27 05:06:41 CEST 2011
Stefano Babic <sbabic <at> denx.de> writes:
>
> On 09/21/2011 08:00 AM, Sandeep Kumar wrote:
> > Hi,
> >
>
> Hi,
>
> > Did anybody face the issue which I am facing in building U-Boot for
> > m501sk board from Artila.
>
> Not anymore. Because no one fixed this board in the last two years, the
> board was removed from U-Boot mainline. It is not supported.
>
> Best regards,
> Stefano Babic
>
That's too bad. I've been developing for the board for the past 3 years and
only recently have been given the opportunity to re-examine the loader and root
file system.
I was super excited that U-Boot supported the board. For about 5 minutes.
Those interested might find this patch of use. I won't be able to test it for a
few days. Applied to the "v2011.06" tag (git checkout v2011.06).
<snip>
diff --git a/arch/arm/include/asm/arch-at91/hardware.h
b/arch/arm/include/asm/arch-at91/hardware.h
index 36af571..4faa072 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -25,22 +25,22 @@
#define __ASM_ARM_ARCH_HARDWARE_H__
#if defined(CONFIG_AT91RM9200)
-# include <asm/arch/at91rm9200.h>
+# include <asm/arch-at91/at91rm9200.h>
#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) || \
defined(CONFIG_AT91SAM9XE)
-# include <asm/arch/at91sam9260.h>
+# include <asm/arch-at91/at91sam9260.h>
#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
-# include <asm/arch/at91sam9261.h>
+# include <asm/arch-at91/at91sam9261.h>
#elif defined(CONFIG_AT91SAM9263)
-# include <asm/arch/at91sam9263.h>
+# include <asm/arch-at91/at91sam9263.h>
#elif defined(CONFIG_AT91SAM9RL)
-# include <asm/arch/at91sam9rl.h>
+# include <asm/arch-at91/at91sam9rl.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
-# include <asm/arch/at91sam9g45.h>
+# include <asm/arch-at91/at91sam9g45.h>
#elif defined(CONFIG_AT91CAP9)
-# include <asm/arch/at91cap9.h>
+# include <asm/arch-at91/at91cap9.h>
#elif defined(CONFIG_AT91X40)
-# include <asm/arch/at91x40.h>
+# include <asm/arch-at91/at91x40.h>
#else
# error "Unsupported AT91 processor"
#endif
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index 68f0415..55b9154 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -162,7 +162,9 @@
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
+#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM + (PHYS_SDRAM_SIZE >> 13))
#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
<snap>
More information about the U-Boot
mailing list