[U-Boot] [PATCH] pm9261: init serial console before relocation
Asen Chavdarov Dimov
dimov at ronetix.at
Thu Sep 15 19:19:46 CEST 2011
The early messages can be seen on the debug console.
Signed-off-by: Asen Chavdarov Dimov <dimov at ronetix.at>
---
board/ronetix/pm9261/pm9261.c | 14 +++++++++-----
include/configs/pm9261.h | 1 +
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 871b94a..e36391b 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -237,24 +237,28 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD */
-int board_init(void)
+int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- /* Enable Ctrlc */
- console_init_f();
-
+ /* Enable clocks for some PIOs */
writel(1 << ATMEL_ID_PIOA |
1 << ATMEL_ID_PIOC,
&pmc->pcer);
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
/* arch number of PM9261-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9261;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9261_nand_hw_init();
#endif
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 3a8b095..1d7abe7 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -158,6 +158,7 @@
#define CONFIG_INITRD_TAG 1
#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
/*
* Hardware drivers
--
1.7.4.4
More information about the U-Boot
mailing list