[U-Boot] [PATCH] pm9263: init serial console before relocation

[Asen Chavdarov Dimov]

The early messages can be seen on the debug console.

Signed-off-by: Asen Chavdarov Dimov <dimov at ronetix.at>
---
 board/ronetix/pm9263/pm9263.c |   19 +++++++++++--------
 include/configs/pm9263.h      |    1 +
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index cfc9847..e102a11 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -337,25 +337,28 @@ void lcd_show_board_info(void)
 
 #endif /* CONFIG_LCD */
 
-int board_init(void)
+int board_early_init_f(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-	/* Enable Ctrlc */
-	console_init_f();
-
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOCDE) |
-		(1 << ATMEL_ID_PIOB),
+	/* Enable clocks for all PIOs */
+	writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+		(1 << ATMEL_ID_PIOCDE),
 		&pmc->pcer);
 
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
 	/* arch number of AT91SAM9263EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_PM9263;
 
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	pm9263_nand_hw_init();
 #endif
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index f1bd389..9d94bbd 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -169,6 +169,7 @@
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_USER_LOWLEVEL_INIT	1
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
-- 
1.7.4.4