[U-Boot] Please pull u-boot-ti/next into arm/next

[Paulraj, Sandeep]

> 
> Hi Sandeep,
> 
> Le 23/09/2011 22:58, s-paulraj at ti.com a écrit :
> > Albert,
> >
> > Please pull u-boot-ti/next into arm/next
> > I checked all the patches i applied for checkpatch errors and saw 2,
> both
> > of which cannot be fixed. Checkpatch complained about the location of
> the
> > header file. It expects things to be like linux.
> > I ran MAKEALL for davinci, omap3 and omap4 and saw no issues.
> >
> > Regards,
> > Sandeep
> >
> > The following changes since commit
> 2cfb66ee61104af65eead73f634c373fec6bc827:
> >    Sandeep Paulraj (1):
> >          devkit8000: Fix build break
> >
> > are available in the git repository at:
> >
> >    git://git.denx.de/u-boot-ti.git next
> >
> > Aneesh V (1):
> >        omap4: update maintainer for omap4 boards
> >
> > Balaji T K (2):
> >        mmc: omap: enable high capacity
> >        mmc: omap: config VMMC, MMC1_PBIAS
> >
> > Heiko Schocher (16):
> >        i2c, davinci: add i2c set speed
> >        net, davinci_emac: add KSZ8864 switch
> >        net, davinci_emac: make less verbose - turn printf() into debug()
> >        net, davinci_emac: let the EMAC detect the PHYs
> >        arm, davinci: move davinci_timer in header file
> >        arm, davinci: add missing timer baseaddresses for !DA8xx cpu
> >        arm, davinci: add internal WDT support for AM1808 cpus
> >        arm, davinci: add RTC base addr
> >        rtc, davinci: add support for davinci internal RTC
> >        arm, davinci: add SYSCFG1 base and register struct
> >        arm, davinci: add some missing defines in hardware.h
> >        arm, davinci, am1808, gpio: add missing defines for bank 8
> >        arm, davinci: add ddr2 definition
> >        arm, davinci: add NOR Boot Configuration Word
> >        arm, davinci, am1808: add lowlevel functions for booting from NOR
> >        arm, davinci, da8xx: add cpuinfo
> >
> > Sanjeev Premi (2):
> >        omap3: Fix compile warning
> >        omap3evm: env: Fix default console
> >
> > Thomas Weber (1):
> >        Devkit8000: Change console from ttyS2 to ttyO2
> 
> Applied to u-boot-arm/next, thanks!


Thanks

--Sandeep