[U-Boot] [PATCH] usb: increase delay after port reset
Marek Vasut
marek.vasut at gmail.com
Mon Apr 2 19:29:16 CEST 2012
Dear Ilya Yanok,
> In our setup (OMAP3 EHCI host, keyboard, mouse mass storage and BT
> dongle devices connected via several hubs) keyboard fails to initialize
> during the bus scan (stalled endpoint while get_descriptor/64) and after
> that keyboard is unusable (even in Linux) until power off/on.
>
> Increasing the delay after port reset from 200ms to 260ms solves this
> problem.
Do we still have this problem?
> Signed-off-by: Ilya Yanok <yanok at emcraft.com>
> ---
> common/usb.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/common/usb.c b/common/usb.c
> index bed5116..5e282c6 100644
> --- a/common/usb.c
> +++ b/common/usb.c
> @@ -1147,7 +1147,7 @@ void usb_hub_port_connect_change(struct usb_device
> *dev, int port) return;
> }
>
> - wait_ms(200);
> + wait_ms(260);
>
> /* Allocate a new device struct for it */
> usb = usb_alloc_new_device();
Best regards,
Marek Vasut
More information about the U-Boot
mailing list