April 2012 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Sun Apr 1 00:35:58 CEST 2012
Ending: Mon Apr 30 23:08:08 CEST 2012
Messages: 1977

[U-Boot] [U-Boot-Users] How to pass MAC address to linux kernel? Jayakumar A
[U-Boot] Please pull u-boot-ti/master Albert ARIBAUD
[U-Boot] [GIT PULL] Pull request: u-boot-imx Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [ARM] [STATUS] for 04/21 release Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] [UPDATED] Pull request: u-boot-arm/master Albert ARIBAUD
[U-Boot] Pull request (additional): u-boot-arm/master Albert ARIBAUD
[U-Boot] Pull request: u-boot-imx Albert ARIBAUD
[U-Boot] [PATCH] fix IDE_BUS(dev) macro Albert ARIBAUD
[U-Boot] [PATCH] arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Albert ARIBAUD
[U-Boot] [PATCH] arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Albert ARIBAUD
[U-Boot] [ARM] [STATUS] Increasingly high build failures Albert ARIBAUD
[U-Boot] [ARM] [STATUS] Increasingly high build failures Albert ARIBAUD
[U-Boot] [ARM] [STATUS] **NO** Increasingly high build failures Albert ARIBAUD
[U-Boot] U-Boot Digest, Vol 47, Issue 24 Albert ARIBAUD
[U-Boot] [PATCH 0/3 v4] devkit3250: add Timll DevKit3250 board initial support Albert ARIBAUD
[U-Boot] Pull request for u-boot-marvell.git Albert ARIBAUD
[U-Boot] Please pull u-boot-ti/next Albert ARIBAUD
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Albert ARIBAUD
[U-Boot] Please pull u-boot-ti/master Albert ARIBAUD
[U-Boot] [PATCH v3] Allow for parallel builds and saved output Albert ARIBAUD
[U-Boot] please pull u-boot-samsung/master Albert ARIBAUD
[U-Boot] packet dropping problem in uboot Ali Ahari
[U-Boot] Problem setting target's ip address in kernel parameters passed by bootm David Aldrich
[U-Boot] U-boot customized Allyson
[U-Boot] [PATCH] Add support s3c2440 NAND controller Ilya Averyanov
[U-Boot] [PATCH] Fix s3c24x0 timer Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440) Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH] Add support s3c2440 NAND controller Ilya Averyanov
[U-Boot] [PATCH] Add support s3c2440 NAND controller Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Ilya Averyanov
[U-Boot] [PATCH] Add support s3c2440 NAND controller Ilya Averyanov
[U-Boot] Fwd: [PATCH] Add support s3c2440 NAND controller Ilya Averyanov
[U-Boot] PCI Resource allocation for Cavium MIPS board Sudhanshu B
[U-Boot] [PATCH v6] kirkwood: add NAS62x0 board support Simon Baatz
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Simon Baatz
[U-Boot] [PATCH 1/4] ARM1136: add cache flush and invalidate operations Stefano Babic
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Stefano Babic
[U-Boot] [PATCH 3/4] mx35: flea3: fix when cache functions are linked Stefano Babic
[U-Boot] [PATCH 4/4] mx35: mx35pdk: fix when cache functions are linked Stefano Babic
[U-Boot] [PATCH V2 1/3] i.MX6: define CACHELINE_SIZE Stefano Babic
[U-Boot] [PATCH V2 2/3] i.MX6: implement enable_caches() Stefano Babic
[U-Boot] [PATCH] mx6qsabrelite: Fix the serial console port Stefano Babic
[U-Boot] [PATCH] mx6qsabrelite: Add boot switch setting information into the README Stefano Babic
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Stefano Babic
[U-Boot] [PATCH] mx6qsabrelite: Fix the serial console port Stefano Babic
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Stefano Babic
[U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver Stefano Babic
[U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device Stefano Babic
[U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver Stefano Babic
[U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device Stefano Babic
[U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver Stefano Babic
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Stefano Babic
[U-Boot] MMC0: DMA transfer failed Stefano Babic
[U-Boot] [PATCH V3 1/4] ARM1136: add cache flush and invalidate operations Stefano Babic
[U-Boot] [PATCH V2 2/4] ARM: 926ejs: use debug() for misaligned addresses Stefano Babic
[U-Boot] [PATCH V3 1/4] ARM1136: add cache flush and invalidate operations Stefano Babic
[U-Boot] [PATCH 1/2] Build u-boot.imx by default when board uses it Stefano Babic
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules Stefano Babic
[U-Boot] [PATCH 1/2] Build u-boot.imx by default when board uses it Stefano Babic
[U-Boot] [PATCH] ARM: add u-boot.imx as target for i.MX SOCs Stefano Babic
[U-Boot] [PATCH] usb: increase delay after port reset Stefano Babic
[U-Boot] [PATCH 3/5] mx5: Add clock config interface Stefano Babic
[U-Boot] [PATCH] ARM: add u-boot.imx as target for i.MX SOCs Stefano Babic
[U-Boot] [PATCH] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Stefano Babic
[U-Boot] [PATCH] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Stefano Babic
[U-Boot] [PATCH] MX31: mx31pdk: drop enable_caches from board file Stefano Babic
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Stefano Babic
[U-Boot] MX28EVK Hangs on DRAM Stefano Babic
[U-Boot] [PATCH V3] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Stefano Babic
[U-Boot] [PATCH 1/2] ARM926EJS: Make asm routines volatile in cache ops Stefano Babic
[U-Boot] [PATCH] MX35: mx35pdk: wrong board revision Stefano Babic
[U-Boot] [PATCH] ARM1136: MX35: Make asm routines volatile in cache ops Stefano Babic
[U-Boot] [PATCH V2] MX35: mx35pdk: wrong board revision Stefano Babic
[U-Boot] [PATCH V2] MX35: mx35pdk: wrong board revision Stefano Babic
[U-Boot] [PATCH v2 1/4] imx: Remove unneeded/repititive definitions from imx headers Stefano Babic
[U-Boot] [PATCH v2 2/4] imx: Add GPIO_TO_PORT macro in the mxc_gpio driver Stefano Babic
[U-Boot] [PATCH v2 3/4] imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5) Stefano Babic
[U-Boot] [PATCH v2 4/4] imx: Return gpio_set_value in gpio_direction_output Stefano Babic
[U-Boot] [PATCH v2 3/4] imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5) Stefano Babic
[U-Boot] [PATCH v2 1/4] imx: Remove unneeded/repititive definitions from imx headers Stefano Babic
[U-Boot] [PATCH v2 4/4] imx: Return gpio_set_value in gpio_direction_output Stefano Babic
[U-Boot] [PATCH v2 2/4] imx: Add GPIO_TO_PORT macro in the mxc_gpio driver Stefano Babic
[U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly Stefano Babic
[U-Boot] [PATCH 1/2 V3] DMA: Split the APBH DMA init into block and channel init Stefano Babic
[U-Boot] [PATCH 2/2] M28: Pull out CONFIG_APBH_DMA so it's always enabled Stefano Babic
[U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
[U-Boot] [PATCH] mx6qsabresd: Add basic support Stefano Babic
[U-Boot] [PATCH 2/8] i.MX: Add target flashable to offset 0 Stefano Babic
[U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Stefano Babic
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Stefano Babic
[U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Stefano Babic
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Stefano Babic
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Stefano Babic
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Stefano Babic
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Stefano Babic
[U-Boot] [PATCH] i.MX6: arm2: Add AXI cache and Qos setting Stefano Babic
[U-Boot] [PATCH] i.MX6: arm2: Add AXI cache and Qos setting Stefano Babic
[U-Boot] Pull request: u-boot-arm/master Stefano Babic
[U-Boot] Pull request: u-boot-imx Stefano Babic
[U-Boot] [PATCH] mx28evk: add NAND support Stefano Babic
[U-Boot] [PATCH] arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Stefano Babic
[U-Boot] [PATCH 0/8 v3] i.MX25: Miscellaneus fixes Stefano Babic
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Stefano Babic
[U-Boot] [PATCH 6/9] imx: usb: There is no such register Stefano Babic
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Stefano Babic
[U-Boot] [PATCH 6/9] imx: usb: There is no such register Stefano Babic
[U-Boot] [PATCH] i.MX2: Support splash screen Stefano Babic
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Stefano Babic
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Stefano Babic
[U-Boot] [PATCH V4 1/8] i.MX25: esdhc: Add mxc_get_clock infrastructure Stefano Babic
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Stefano Babic
[U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register Stefano Babic
[U-Boot] [PATCH V4 6/8] imx: usb: There is no such register Stefano Babic
[U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h Stefano Babic
[U-Boot] [PATCH V4 8/8] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Stefano Babic
[U-Boot] [PATCH V4 2/8] i.MX25: This architecture has a GPIO4 too Stefano Babic
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Stefano Babic
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Stefano Babic
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Stefano Babic
[U-Boot] [PATCH] mx6qsabrelite: No need to set the direction for GPIO3_23 again Stefano Babic
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Stefano Babic
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Stefano Babic
[U-Boot] Booting a dt zImage kernel Stefano Babic
[U-Boot] [Yaffs] yaffs2 u-boot patching support Stefano Babic
[U-Boot] [PATCH 1/2] mx28evk: Allow to booting a dt kernel Stefano Babic
[U-Boot] [PATCH 2/2] m28evk: Allow to booting a dt kernel Stefano Babic
[U-Boot] [PATCH 4/4] mx31pdk: Allow booting a zImage kernel Stefano Babic
[U-Boot] [PATCH 1/4] mx28evk: Allow booting a zImage kernel Stefano Babic
[U-Boot] [PATCH 3/4] mx6qarm2: Allow booting a zImage kernel Stefano Babic
[U-Boot] [PATCH 2/4] mx6qsabrelite: Allow booting a zImage kernel Stefano Babic
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Stefano Babic
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Stefano Babic
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Stefano Babic
[U-Boot] Using sata on mx6qsabrelite Stefano Babic
[U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Stefano Babic
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Stefano Babic
[U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories Stefano Babic
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Peter Barada
[U-Boot] Can't read kernel if bad blocks are present in partition Peter Barada
[U-Boot] Can't read kernel if bad blocks are present in partition Peter Barada
[U-Boot] [PATCH] ARM: add u-boot.imx as target for i.MX SOCs Dirk Behme
[U-Boot] A few things for the release? Dirk Behme
[U-Boot] [PATCH] mkenvimage: Fix compiler warning Dirk Behme
[U-Boot] [PATCH] ARM: add u-boot.imx as target for i.MX SOCs Dirk Behme
[U-Boot] [PATCH v2] mkenvimage: Fix compiler warning Dirk Behme
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Dirk Behme
[U-Boot] [PATCH v4 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED) Dirk Behme
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Dirk Behme
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Dirk Behme
[U-Boot] ld fails with .bss / .rel.dyn overlap for 2011.12 Dirk Behme
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Dirk Behme
[U-Boot] [PATCH] mx6qsabrelite: No need to set the direction for GPIO3_23 again Dirk Behme
[U-Boot] [PATCH] i.MX6: arm2: Add AXI cache and Qos setting Dirk Behme
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Dirk Behme
[U-Boot] [PATCH] mx6qsabresd: Add basic support Dirk Behme
[U-Boot] [PATCH] mx6qsabresd: Add basic support Dirk Behme
[U-Boot] FW: I want to use Barebox Dirk Behme
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Dirk Behme
[U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled Dirk Behme
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Dirk Behme
[U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache Dirk Behme
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Dirk Behme
[U-Boot] [PATCH V3] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Dirk Behme
[U-Boot] [PATCH] i.MX: fsl_esdhc: allow use with cache enabled. Dirk Behme
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Dirk Behme
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Dirk Behme
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Dirk Behme
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Dirk Behme
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Dirk Behme
[U-Boot] Using sata on mx6qsabrelite Dirk Behme
[U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock() Dirk Behme
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Dirk Behme
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Dirk Behme
[U-Boot] MTD Partitioning does not work. Axel Beierlein
[U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC Rafael Beims
[U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC Rafael Beims
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Alexandre Belloni
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Alexandre Belloni
[U-Boot] [PATCH v5] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Alexandre Belloni
[U-Boot] [PATCH] bootm: fix usage of lmb_reserve() Andreas Bießmann
[U-Boot] [PATCH] bootm: fix usage of lmb_reserve() Andreas Bießmann
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Andreas Bießmann
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Bishop, Mark
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Bishop, Mark
[U-Boot] [PATCH] tools/env: check flash length before probing Bishop, Mark
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Bishop, Mark
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Bishop, Mark
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Bishop, Mark
[U-Boot] fw_setenv writes to bootdelay but not ethaddr Bishop, Mark
[U-Boot] nboot won't boot my uImage Bishop, Mark
[U-Boot] nboot won't boot my uImage Bishop, Mark
[U-Boot] [PATCH] spi_flash/stmicro: add geometrical info for N25Q256 from Micron Jérôme Carretero
[U-Boot] [PATCH] davinci: reduce pimux_config size by storing register id instead of address Jérôme Carretero
[U-Boot] [PATCH] davinci/spi: allow usage of other chip selects and buses Jérôme Carretero
[U-Boot] [PATCH 2/2] SDHC/MMC: remove the member has_init Huang Changming-R66093
[U-Boot] [PATCH 1/2 v2] FSL/eSDHC: enable the peripheral clock to detect the card Huang Changming-R66093
[U-Boot] MX28EVK Hangs on DRAM Chiz Chikwendu
[U-Boot] Pull request: u-boot-nios/master Thomas Chou
[U-Boot] Pull request: u-boot-nios/master Thomas Chou
[U-Boot] Pull request: u-boot-nios/master Thomas Chou
[U-Boot] [U-BOOT][PATCH] mmc: remove the hard setting for tran_speed Jae hoon Chung
[U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5 Jae hoon Chung
[U-Boot] [PATCH v3 0/3] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] [PATCH v3 1/3] mmc: sdhci: add the quirk for broken R1b response Jaehoon Chung
[U-Boot] [PATCH v3 2/3] mmc: use sdhci.c intead of s5p_mmc.c Jaehoon Chung
[U-Boot] [PATCH v3 3/3] ARM: SAMSUNG: support sdhci controller Jaehoon Chung
[U-Boot] [PATCH v3 2/3] mmc: use sdhci.c intead of s5p_mmc.c Jaehoon Chung
[U-Boot] [PATCH v4 0/4] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] [PATCH v4 1/4] mmc: sdhci: add the quirk for broken r1b response Jaehoon Chung
[U-Boot] [PATCH v4 2/4] mmc: add the quirk to use the sdhci for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v4 3/4] mmc: support the sdhci instead of s5p_mmc for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v4 4/4] ARM: SAMSUNG: support sdhci controller Jaehoon Chung
[U-Boot] [PATCH v5 0/4] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] [PATCH v5 1/4] mmc: sdhci: add the quirk for broken r1b response Jaehoon Chung
[U-Boot] [PATCH v5 2/4] mmc: add the quirk to use the sdhci for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v5 3/4] mmc: support the sdhci instead of s5p_mmc for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v5 4/4] ARM: SAMSUNG: support sdhci controller Jaehoon Chung
[U-Boot] [PATCH v3 1/3] mmc: sdhci: add the quirk for broken R1b response Jaehoon Chung
[U-Boot] [PATCH v6 0/4] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] [PATCH v6 1/4] mmc: sdhci: add the quirk for broken r1b response Jaehoon Chung
[U-Boot] [PATCH v6 2/4] mmc: add the quirk to use the sdhci for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v6 3/4] mmc: support the sdhci instead of s5p_mmc for samsung-soc Jaehoon Chung
[U-Boot] [PATCH v6 4/4] ARM: SAMSUNG: support sdhci controller Jaehoon Chung
[U-Boot] [RESEND PATCH v6 0/4] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] [RESEND PATCH v6 1/4] mmc: sdhci: add the quirk for broken r1b response Jaehoon Chung
[U-Boot] [RESEND PATCH v6 2/4] mmc: add the quirk to use the sdhci for samsung-soc Jaehoon Chung
[U-Boot] [RESEND PATCH v6 3/4] mmc: support the sdhci instead of s5p_mmc for samsung-soc Jaehoon Chung
[U-Boot] [RESEND PATCH v6 4/4] ARM: SAMSUNG: support sdhci controller Jaehoon Chung
[U-Boot] [PATCH] EXYNOS: add the enable_cache function for support cache Jaehoon Chung
[U-Boot] [RESEND PATCH v6 0/4] mmc: support sdhci instead of s5p_mmc Jaehoon Chung
[U-Boot] usb showed wrong device count Ludovic Courtès
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules Gachet Daniel
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules Gachet Daniel
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules Gachet Daniel
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules Gachet Daniel
[U-Boot] [PATCH v3] Correct corrupted NAND Flash access on KARO TX25 modules Gachet Daniel
[U-Boot] PCI Resource allocation for Cavium MIPS board Wolfgang Denk
[U-Boot] some questions about u-boot Wolfgang Denk
[U-Boot] some questions about u-boot Wolfgang Denk
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Wolfgang Denk
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Wolfgang Denk
[U-Boot] [PATCH] LMB: Fix undefined lmb_reserve() on non-lmb platforms Wolfgang Denk
[U-Boot] Pull request: u-boot-x86/master Wolfgang Denk
[U-Boot] Pull request: u-boot-nios/master Wolfgang Denk
[U-Boot] Pull request: u-boot-onenand Wolfgang Denk
[U-Boot] Pull request: u-boot-net Wolfgang Denk
[U-Boot] [PULL] u-boot-staging/marek.vasut at gmail.com :: FOR u-boot/master Wolfgang Denk
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Wolfgang Denk
[U-Boot] Standalone Binary Wolfgang Denk
[U-Boot] [PULL] u-boot-staging/marek.vasut at gmail.com :: FOR u-boot/master Wolfgang Denk
[U-Boot] Standalone Binary Wolfgang Denk
[U-Boot] ld fails with .bss / .rel.dyn overlap for 2011.12 Wolfgang Denk
[U-Boot] ld fails with .bss / .rel.dyn overlap for 2011.12 Wolfgang Denk
[U-Boot] procedure to down load u-boot to RAM Wolfgang Denk
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Wolfgang Denk
[U-Boot] using different architecture / toolchain for SPL build Wolfgang Denk
[U-Boot] [PATCH] mx6qsabresd: Add basic support Wolfgang Denk
[U-Boot] using different architecture / toolchain for SPL build Wolfgang Denk
[U-Boot] [STATUS] New MIPS custodian Wolfgang Denk
[U-Boot] [PATCH] mx6qsabresd: Add basic support Wolfgang Denk
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Wolfgang Denk
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Wolfgang Denk
[U-Boot] [RFC][PATCH] INIT_FUNC - List madness Wolfgang Denk
[U-Boot] using different architecture / toolchain for SPL build Wolfgang Denk
[U-Boot] u-boot.bin is so large Wolfgang Denk
[U-Boot] FW: P4080 target has 16G memory stability issues ... Wolfgang Denk
[U-Boot] [PATCH 08/08] include/configs: Better utilize CONFIG_SYS_NO_FLASH Wolfgang Denk
[U-Boot] [PATCH 2/6] usb:g_dnl:f_usbd_thor: USB Download function to support THOR protocol Wolfgang Denk
[U-Boot] [PATCH 2/6] usb:g_dnl:f_usbd_thor: USB Download function to support THOR protocol Wolfgang Denk
[U-Boot] [PATCH 3/6] usb:g_dnl:thor: THOR protocol back end support for f_usbd_thor function Wolfgang Denk
[U-Boot] [PATCH 4/6] usb:command: Support for USB Download command Wolfgang Denk
[U-Boot] [PATCH 5/6] usb:g_dnl: Support for g_dnl download usb gadget for GONI board Wolfgang Denk
[U-Boot] [PATCH 6/6] usb:g_dnl: Support for g_dnl download usb gadget for TRATS board Wolfgang Denk
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Wolfgang Denk
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Wolfgang Denk
[U-Boot] [PATCH 2/4] usb:gadget:composite: Linux composite.{h/c} code adjustement for u-boot Wolfgang Denk
[U-Boot] [PATCH] usb:udc:samsung Add functions for storing private gadget data in UDC driver Wolfgang Denk
[U-Boot] [PATCH] mx6qsabresd: Add basic support Wolfgang Denk
[U-Boot] [PATCH] mx6qsabresd: Add basic support Wolfgang Denk
[U-Boot] [PATCH] mx6qsabresd: Add basic support Wolfgang Denk
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Wolfgang Denk
[U-Boot] [PATCH 2/4] usb:gadget:composite: Linux composite.{h/c} code adjustement for u-boot Wolfgang Denk
[U-Boot] [PATCH 08/08] include/configs: Better utilize CONFIG_SYS_NO_FLASH Wolfgang Denk
[U-Boot] Pull request: u-boot-staging Wolfgang Denk
[U-Boot] [UPDATED] Pull request: u-boot-arm/master Wolfgang Denk
[U-Boot] MTD Partitioning does not work. Wolfgang Denk
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Wolfgang Denk
[U-Boot] [PATCH] i.MX28: Shut down the LCD controller before reset Wolfgang Denk
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Wolfgang Denk
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Wolfgang Denk
[U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Wolfgang Denk
[U-Boot] [PATCH 0/1] i.MX2: Support splash screen Wolfgang Denk
[U-Boot] [PATCH] i.MX2: Support splash screen Wolfgang Denk
[U-Boot] [U-Boot-Users] How to pass MAC address to linux kernel? Wolfgang Denk
[U-Boot] FW: I want to use Barebox Wolfgang Denk
[U-Boot] FW: I want to use Barebox Wolfgang Denk
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Wolfgang Denk
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Wolfgang Denk
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Wolfgang Denk
[U-Boot] Pull request (additional): u-boot-arm/master Wolfgang Denk
[U-Boot] Pull request: u-boot-sh Wolfgang Denk
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Wolfgang Denk
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Wolfgang Denk
[U-Boot] [PATCH] e1000e : Set Receive Threshold granularity to number of Wolfgang Denk
[U-Boot] [ARM] [STATUS] Increasingly high build failures Wolfgang Denk
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Wolfgang Denk
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Wolfgang Denk
[U-Boot] [PATCH] fdt: avoid bad MAKEALL status Wolfgang Denk
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Wolfgang Denk
[U-Boot] [ARM] [STATUS] **NO** Increasingly high build failures Wolfgang Denk
[U-Boot] [PATCH] fdt: avoid bad MAKEALL status Wolfgang Denk
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Wolfgang Denk
[U-Boot] [PATCH] fdt: Adjust Makefile to find .dtsi include files Wolfgang Denk
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Wolfgang Denk
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Wolfgang Denk
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Wolfgang Denk
[U-Boot] [PATCH] fdt: avoid bad MAKEALL status Wolfgang Denk
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Wolfgang Denk
[U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled Wolfgang Denk
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Wolfgang Denk
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Wolfgang Denk
[U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script Wolfgang Denk
[U-Boot] [PATCH] net: ll_temac: drop obsolete "NAMESIZE" define Wolfgang Denk
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] 'run' no longer aborts on an error, can someone please verify Wolfgang Denk
[U-Boot] Sandbox cannot be built without HUSH Wolfgang Denk
[U-Boot] 'run' no longer aborts on an error, can someone please verify Wolfgang Denk
[U-Boot] 'run' no longer aborts on an error, can someone please verify Wolfgang Denk
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Wolfgang Denk
[U-Boot] [PATCH] Fix the behaviour of the 'run' command Wolfgang Denk
[U-Boot] 'run' no longer aborts on an error, can someone please verify Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] [PATCH] Fix the behaviour of the 'run' command Wolfgang Denk
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Wolfgang Denk
[U-Boot] [PATCH V2 1/2] arm: fix bootm with device tree Wolfgang Denk
[U-Boot] [STATUS] v2012.04.1 bug fix release Wolfgang Denk
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Wolfgang Denk
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Wolfgang Denk
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Wolfgang Denk
[U-Boot] [PATCH 2/2 v4] Add support for MINI2440 (s3c2440). Wolfgang Denk
[U-Boot] [PATCH v3 3/4] sandbox: Use the new run_command() Wolfgang Denk
[U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Wolfgang Denk
[U-Boot] Pull request: Integrate latest yaffs2 Wolfgang Denk
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Wolfgang Denk
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Wolfgang Denk
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Wolfgang Denk
[U-Boot] Sandbox question Wolfgang Denk
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Wolfgang Denk
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Wolfgang Denk
[U-Boot] Porting u-boot for MPC8280 based board. Wolfgang Denk
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Wolfgang Denk
[U-Boot] Porting u-boot for MPC8280 based board. Wolfgang Denk
[U-Boot] [STATUS] v2012.04.01 released Wolfgang Denk
[U-Boot] Can anyone help me to solve the stack problem of U-boot? Urgent~ Wolfgang Denk
[U-Boot] Undefined results when building highbank board Wolfgang Denk
[U-Boot] "make menuconfig" does not work Wolfgang Denk
[U-Boot] Pull request: Integrate latest yaffs2 Wolfgang Denk
[U-Boot] Porting u-boot for MPC8280 based board. Wolfgang Denk
[U-Boot] read command Wolfgang Denk
[U-Boot] [PATCH v2 2/3] LCD: add compressed 32bpp BMP image data Wolfgang Denk
[U-Boot] Undefined results when building highbank board Wolfgang Denk
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk
[U-Boot] Pull request: Integrate latest yaffs2 Wolfgang Denk
[U-Boot] Pull request: Integrate latest yaffs2 Wolfgang Denk
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Wolfgang Denk
[U-Boot] [PATCH v2 10/11] New config variable CONFIG_PREMONITOR Wolfgang Denk
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Wolfgang Denk
[U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900 Wolfgang Denk
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Wolfgang Denk
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Wolfgang Denk
[U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back Wolfgang Denk
[U-Boot] [PATCH v2 05/11] cfb_console: Add functions for moving with cursor Wolfgang Denk
[U-Boot] [PATCH v2 06/11] cfb_console: Add support for some ANSI terminal escape codes Wolfgang Denk
[U-Boot] [PATCH v2 10/11] New config variable CONFIG_PREMONITOR Wolfgang Denk
[U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900 Wolfgang Denk
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Wolfgang Denk
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Wolfgang Denk
[U-Boot] [PATCH 0/2] Replace yaffs2 with new version Wolfgang Denk
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Wolfgang Denk
[U-Boot] [PATCH v2 1/4] patman: Fix a typo error Wolfgang Denk
[U-Boot] [PATCH v2 2/4] patman: Add meaningful statements instead of blah blah Wolfgang Denk
[U-Boot] [PATCH v2 3/4] patman: Change the location of patman path Wolfgang Denk
[U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config Wolfgang Denk
[U-Boot] [PATCH v2 2/3] LCD: add compressed 32bpp BMP image data Wolfgang Denk
[U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories Wolfgang Denk
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Wolfgang Denk
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Wolfgang Denk
[U-Boot] Problem setting target's ip address in kernel parameters passed by bootm Wolfgang Denk
[U-Boot] Pull request: u-boot-nds32 Wolfgang Denk
[U-Boot] [PATCH] image/fit: drop inline markings on parser code Wolfgang Denk
[U-Boot] Pull request u-boot-blackfin.git (master branch) Wolfgang Denk
[U-Boot] [i2c] Pull request Wolfgang Denk
[U-Boot] Please pull u-boot-mpc85xx Wolfgang Denk
[U-Boot] [PATCH v3] Allow for parallel builds and saved output Wolfgang Denk
[U-Boot] Please pull u-boot-ppc4xx/master Wolfgang Denk
[U-Boot] [PATCH v4 RESEND 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Wolfgang Denk
[U-Boot] Pull request: u-boot-staging Wolfgang Denk
[U-Boot] [PATCH][SDK1.2] powerpc/p1010rdb: add readme document for p1010rdb Wolfgang Denk
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Marc Dietrich
[U-Boot] [PATCH] sh: Fix rsk7264 pin setup for on-board ethernet Phil Edworthy
[U-Boot] [PATCH 1/8] ppc4xx: Adjust environment size on neo Dirk Eibach
[U-Boot] [PATCH 2/8] ppc4xx: Make gdsys 405ep boards reset more generic Dirk Eibach
[U-Boot] [PATCH 3/8] powerpc: Adapt gdsys 405ep boards to platform changes Dirk Eibach
[U-Boot] [PATCH 4/8] powerpc: Support gdsys dlvision-10g hardware 1.20 Dirk Eibach
[U-Boot] [PATCH 5/8] Consider CONFIG_ZERO_BOOTDELAY_CHECK when CONFIG_AUTOBOOT_KEYED is set Dirk Eibach
[U-Boot] [PATCH 6/8] powerpc: Update gdsys board configurations Dirk Eibach
[U-Boot] [PATCH 7/8] powerpc: Fix typo in gdsys_fpga.h Dirk Eibach
[U-Boot] [PATCH 8/8] powerpc: Add sdcard and spi boot support to P1022DS Dirk Eibach
[U-Boot] [PATCH 0/6] Various gdsys ppc4xx boards revised Dirk Eibach
[U-Boot] [PATCH v2 1/6] powerpc/ppc4xx: Adjust environment size on neo Dirk Eibach
[U-Boot] [PATCH v2 2/6] powerpc/ppc4xx: Make gdsys 405ep boards reset more generic Dirk Eibach
[U-Boot] [PATCH v2 3/6] powerpc/ppc4xx: Adapt gdsys 405ep boards to platform changes Dirk Eibach
[U-Boot] [PATCH v2 4/6] powerpc/ppc4xx: Support gdsys dlvision-10g hardware 1.20 Dirk Eibach
[U-Boot] [PATCH v2 5/6] powerpc/ppc4xx: Update gdsys board configurations Dirk Eibach
[U-Boot] [PATCH v2 6/6] powerpc/ppc4xx: Fix typo in gdsys_fpga.h Dirk Eibach
[U-Boot] [PATCH v2] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS Dirk Eibach
[U-Boot] [PATCH v2] Consider CONFIG_ZERO_BOOTDELAY_CHECK when CONFIG_AUTOBOOT_KEYED is set Dirk Eibach
[U-Boot] [PATCH] powerpc/ppc4xx: Remove typedefs for gdsys FPGA Dirk Eibach
[U-Boot] MMC0: DMA transfer failed Fabio Estevam
[U-Boot] [PATCH] i.MX28: Fix initial stack pointer position Fabio Estevam
[U-Boot] MMC0: DMA transfer failed Fabio Estevam
[U-Boot] [PATCH] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Fabio Estevam
[U-Boot] [PATCH 2/2] mmc: mxsmmc: Fix operation with DMA Fabio Estevam
[U-Boot] [PATCH 3/5] mx5: Add clock config interface Fabio Estevam
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Fabio Estevam
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Fabio Estevam
[U-Boot] MX28EVK Hangs on DRAM Fabio Estevam
[U-Boot] MX28EVK Hangs on DRAM Fabio Estevam
[U-Boot] MX28EVK Hangs on DRAM Fabio Estevam
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Fabio Estevam
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Fabio Estevam
[U-Boot] MX28EVK Hangs on DRAM Fabio Estevam
[U-Boot] [PATCH] MX31: mx31pdk: drop enable_caches from board file Fabio Estevam
[U-Boot] [PATCH V2] MX35: mx35pdk: wrong board revision Fabio Estevam
[U-Boot] [PATCH] i.MX28: Lower the amount of blocks transfered in one DMA cycle Fabio Estevam
[U-Boot] [PATCH 1/2 V3] DMA: Split the APBH DMA init into block and channel init Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabrelite: No need to set the direction for GPIO3_23 again Fabio Estevam
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Fabio Estevam
[U-Boot] [PATCH] configs: Remove unused symbol CONFIG_DISCOVER_PHY Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx6qsabresd: Add basic support Fabio Estevam
[U-Boot] [PATCH] mx28evk: add NAND support Fabio Estevam
[U-Boot] [PATCH] spi: mxs: Allow other chip selects to work Fabio Estevam
[U-Boot] Booting a dt zImage kernel Fabio Estevam
[U-Boot] Booting a dt zImage kernel Fabio Estevam
[U-Boot] Booting a dt zImage kernel Fabio Estevam
[U-Boot] [PATCH 1/2] mx28evk: Allow to booting a dt kernel Fabio Estevam
[U-Boot] [PATCH 2/2] m28evk: Allow to booting a dt kernel Fabio Estevam
[U-Boot] [PATCH 1/4] mx28evk: Allow booting a zImage kernel Fabio Estevam
[U-Boot] [PATCH 2/4] mx6qsabrelite: Allow booting a zImage kernel Fabio Estevam
[U-Boot] [PATCH 3/4] mx6qarm2: Allow booting a zImage kernel Fabio Estevam
[U-Boot] [PATCH 4/4] mx31pdk: Allow booting a zImage kernel Fabio Estevam
[U-Boot] [PATCH v2 1/2] spi: mxs: Introduce spi_cs_is_valid() Fabio Estevam
[U-Boot] [PATCH v2 2/2] spi: mxs: Allow other chip selects to work Fabio Estevam
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Fabio Estevam
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Fabio Estevam
[U-Boot] Using sata on mx6qsabrelite Fabio Estevam
[U-Boot] Using sata on mx6qsabrelite Fabio Estevam
[U-Boot] Using sata on mx6qsabrelite Fabio Estevam
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Fabio Estevam
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Fabio Estevam
[U-Boot] [PATCH v2] imx-common: Factor out get_ahb_clk() Fabio Estevam
[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk() Fabio Estevam
[U-Boot] [PATCH 1/3] mx5: Add clock config interface Fabio Estevam
[U-Boot] [PATCH 2/3] mx53loco: Allow to print CPU information at a later stage Fabio Estevam
[U-Boot] [PATCH 3/3] mx53loco: Add support for 1GHz operation for DA9053-based boards Fabio Estevam
[U-Boot] [PATCH v3 0/6] env: handle special variables and selective env default Gerlando Falauto
[U-Boot] [PATCH v3 1/6] env: unify logic to check and apply changes Gerlando Falauto
[U-Boot] [PATCH v3 2/6] env: make himport_r() selective on variables Gerlando Falauto
[U-Boot] [PATCH v3 3/6] env: add check/apply logic to himport_r() Gerlando Falauto
[U-Boot] [PATCH v3 4/6] env: check and apply changes on delete/destroy Gerlando Falauto
[U-Boot] [PATCH v3 5/6] env: make "env default" selective, check and apply Gerlando Falauto
[U-Boot] [PATCH v3 6/6] env: delete selected vars not present in imported env Gerlando Falauto
[U-Boot] [PATCH v3 1/6] env: unify logic to check and apply changes Gerlando Falauto
[U-Boot] [PATCH v3 2/6] env: make himport_r() selective on variables Gerlando Falauto
[U-Boot] [PATCH v3 3/6] env: add check/apply logic to himport_r() Gerlando Falauto
[U-Boot] [PATCH v3 6/6] env: delete selected vars not present in imported env Gerlando Falauto
[U-Boot] [PATCH] cmd_sf: add size checking to spi flash commands Gerlando Falauto
[U-Boot] [PATCH 0/2] SPI flash update command Gerlando Falauto
[U-Boot] [PATCH 1/2] cmd_sf: let "sf update" erase last sector as a whole Gerlando Falauto
[U-Boot] [PATCH 2/2] cmd_sf: "sf update" preserve the final part of the last sector Gerlando Falauto
[U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script Gerlando Falauto
[U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script Gerlando Falauto
[U-Boot] [PATCH] mxs_i2c: Fix internal address byte order Torsten Fleischer
[U-Boot] [PATCH] mxs-i2c: Fix internal address byte order Torsten Fleischer
[U-Boot] [PATCH] powerpc/85xx: Add USB device-tree fixup for various platforms Andy Fleming
[U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock Andy Fleming
[U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support Andy Fleming
[U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131 RDB Support Andy Fleming
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Andy Fleming
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Andy Fleming
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Andy Fleming
[U-Boot] Please pull u-boot-mpc85xx Andy Fleming
[U-Boot] [PATCH v3] Allow for parallel builds and saved output Andy Fleming
[U-Boot] [PATCH] Remove extra boards from LIST_ixp Andy Fleming
[U-Boot] [PATCH v3] Allow for parallel builds and saved output Andy Fleming
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Andy Fleming
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Mike Frysinger
[U-Boot] [PATCH] LMB: Fix undefined lmb_reserve() on non-lmb platforms Mike Frysinger
[U-Boot] [STATUS] v2012.04-rc1 is out Mike Frysinger
[U-Boot] [PATCH 2/5] net: add helper to generate random mac address Mike Frysinger
[U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands Mike Frysinger
[U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution Mike Frysinger
[U-Boot] [PATCH v3 3/4] sandbox: Use the new run_command() Mike Frysinger
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Mike Frysinger
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Mike Frysinger
[U-Boot] [PATCH] Prevent malloc with size 0 Mike Frysinger
[U-Boot] [PATCH] Prevent malloc with size 0 Mike Frysinger
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Mike Frysinger
[U-Boot] [PATCH V2 2/4] ARM: 926ejs: use debug() for misaligned addresses Mike Frysinger
[U-Boot] [PATCH 1/2] Build u-boot.imx by default when board uses it Mike Frysinger
[U-Boot] [PATCH V2 2/4] ARM: 926ejs: use debug() for misaligned addresses Mike Frysinger
[U-Boot] [PATCH] Prevent malloc with size 0 Mike Frysinger
[U-Boot] [PATCH 0/6] add zip command support for uboot Mike Frysinger
[U-Boot] [PATCH] ARM: add u-boot.imx as target for i.MX SOCs Mike Frysinger
[U-Boot] [PATCH] cmd_sf: add size checking to spi flash commands Mike Frysinger
[U-Boot] [PATCH 3/3] MIPS: fix endianess handling Mike Frysinger
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Mike Frysinger
[U-Boot] [PATCH 1/3] net/eth: set status to active before calling init Mike Frysinger
[U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole Mike Frysinger
[U-Boot] [RFC v0 08/11] omap3: Consolidate UART information in omap3_common.h Mike Frysinger
[U-Boot] [RFC v0 0/11]: Add <configs/omap3_common.h> Mike Frysinger
[U-Boot] [RFC v0 08/11] omap3: Consolidate UART information in omap3_common.h Mike Frysinger
[U-Boot] [RFC v0 0/11]: Add <configs/omap3_common.h> Mike Frysinger
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Mike Frysinger
[U-Boot] [PATCH] usb: use noinline define Mike Frysinger
[U-Boot] [PATCH] Blackfin: bfin_sdh: drop dos part hardcode Mike Frysinger
[U-Boot] [PATCH 1/2 v2] net: punt bd->bi_ip_addr Mike Frysinger
[U-Boot] [PATCH 2/2 v2] net: move bootfile init into eth_initialize Mike Frysinger
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Mike Frysinger
[U-Boot] [PATCH] tools/env: check flash length before probing Mike Frysinger
[U-Boot] fw_printenv can't read the uboot enviroment from NAND Mike Frysinger
[U-Boot] [PATCH] usb: use noinline define Mike Frysinger
[U-Boot] [PATCH] tools/env: check flash length before probing Mike Frysinger
[U-Boot] [PATCH] usb: use noinline define Mike Frysinger
[U-Boot] [PATCH] usb: use noinline define Mike Frysinger
[U-Boot] fw_setenv writes to bootdelay but not ethaddr Mike Frysinger
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Mike Frysinger
[U-Boot] [PATCH v2] mkenvimage: Fix compiler warning Mike Frysinger
[U-Boot] [PATCH 1/2] ARM926EJS: Make asm routines volatile in cache ops Mike Frysinger
[U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole Mike Frysinger
[U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands Mike Frysinger
[U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution Mike Frysinger
[U-Boot] [PATCH V4] MAKEALL: Add -m/-M option to determine maintainers Mike Frysinger
[U-Boot] [PATCH] spi_flash/stmicro: add geometrical info for N25Q256 from Micron Mike Frysinger
[U-Boot] fw_setenv writes to bootdelay but not ethaddr Mike Frysinger
[U-Boot] [PATCH 1/4] gunzip: rename z{alloc, free} to gz{alloc, free} Mike Frysinger
[U-Boot] [PATCH 2/4] lin_gadget: use common mdelay Mike Frysinger
[U-Boot] [PATCH 3/4] linux/compat.h: rename from linux/mtd/compat.h Mike Frysinger
[U-Boot] [PATCH 4/4] lin_gadget: use common linux/compat.h Mike Frysinger
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Mike Frysinger
[U-Boot] [PATCH 0/6] add zip command support for uboot Mike Frysinger
[U-Boot] fw_setenv writes to bootdelay but not ethaddr Mike Frysinger
[U-Boot] [PATCH] net: ll_temac: drop obsolete "NAMESIZE" define Mike Frysinger
[U-Boot] [PATCH 0/6] add zip command support for uboot Mike Frysinger
[U-Boot] [PATCH V3]fs/fat: align disk buffers on cache line to enable DMA and cache Mike Frysinger
[U-Boot] Introducing myself Mike Frysinger
[U-Boot] FW: I want to use Barebox Mike Frysinger
[U-Boot] [PATCH] image/fit: drop inline markings on parser code Mike Frysinger
[U-Boot] Pull request u-boot-blackfin.git (master branch) Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] [PATCH] spi: mxs: Allow other chip selects to work Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] Sandbox question Mike Frysinger
[U-Boot] Sandbox: auto exiting on pipe closure Mike Frysinger
[U-Boot] [PATCH v2 1/2] spi: mxs: Introduce spi_cs_is_valid() Mike Frysinger
[U-Boot] [PATCH] openrisc/cache: disable icache during invalidation Mike Frysinger
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Mike Frysinger
[U-Boot] [PATCH] Remove remaining mdelay() macros Mike Frysinger
[U-Boot] [PATCH] CONFIG_SYS_BAUDRATE_TABLE: Place default into <config.h> Mike Frysinger
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Mike Frysinger
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Mike Frysinger
[U-Boot] [PATCH 4/4] USB: Document the QH and qTD antics in EHCI-HCD Mike Frysinger
[U-Boot] [SOT] linker scripts Mike Frysinger
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Mike Frysinger
[U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Mike Frysinger
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Mike Frysinger
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Mike Frysinger
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Mike Frysinger
[U-Boot] [PATCH 2/2] GCC47: Fix warning in md5.c Mike Frysinger
[U-Boot] [PATCH] Move bootstage timer out of lib/time.c Matthias Fuchs
[U-Boot] Can't read kernel if bad blocks are present in partition Alexandre Gambier
[U-Boot] Can't read kernel if bad blocks are present in partition Alexandre Gambier
[U-Boot] [PATCH] hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT Sughosh Ganu
[U-Boot] [PATCH v2 03/10] net: cosmetic: net.c checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 06/10] net: cosmetic: nfs.* checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 07/10] net: cosmetic: rarp.* checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 08/10] net: cosmetic: sntp.* checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 09/10] net: cosmetic: tftp.* checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 10/10] net: cosmetic: netconsole.c checkpatch compliance Simon Glass
[U-Boot] [PATCH v2 01/18] net: Refactor IP, UPD, and ICMP header writing functions Simon Glass
[U-Boot] [PATCH v2 02/18] net: Refactor NetSendUDPPacket to share more code Simon Glass
[U-Boot] [PATCH v2 03/18] net: Refactor packet length computations Simon Glass
[U-Boot] [PATCH v2 04/18] net: Refactor bootp packet length computations Simon Glass
[U-Boot] [PATCH v2 05/18] net: Move debug trace to point of action Simon Glass
[U-Boot] [PATCH v3 0/23] tegra: warmboot (suspend / resume) support Simon Glass
[U-Boot] [PATCH v3 01/23] fdt: Add function to locate an array in the device tree Simon Glass
[U-Boot] [PATCH v3 02/23] fdt: Add function to return next compatible subnode Simon Glass
[U-Boot] [PATCH v3 03/23] Add abs() macro to return absolute value Simon Glass
[U-Boot] [PATCH v3 04/23] i2c: Add TPS6586X driver Simon Glass
[U-Boot] [PATCH v3 05/23] Add AES crypto library Simon Glass
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Simon Glass
[U-Boot] [PATCH v3 07/23] tegra: Add functions to access low-level Osc/PLL details Simon Glass
[U-Boot] [PATCH v3 08/23] tegra: Add crypto library for warmboot code Simon Glass
[U-Boot] [PATCH v3 09/23] tegra: Add flow, gp_padctl, fuse, sdram headers Simon Glass
[U-Boot] [PATCH v3 10/23] tegra: Add tegra_get_chip_type() to detect SKU Simon Glass
[U-Boot] [PATCH v3 11/23] tegra: Add header file for APB_MISC register Simon Glass
[U-Boot] [PATCH v3 12/23] tegra: Add EMC support for optimal memory timings Simon Glass
[U-Boot] [PATCH v3 13/23] tegra: Add PMU to manage power supplies Simon Glass
[U-Boot] [PATCH v3 14/23] tegra: Set up PMU for Nvidia boards Simon Glass
[U-Boot] [PATCH v3 15/23] tegra: Add warmboot implementation Simon Glass
[U-Boot] [PATCH v3 16/23] tegra: Setup PMC scratch info from ap20 setup Simon Glass
[U-Boot] [PATCH v3 17/23] tegra: Set up warmboot code on Nvidia boards Simon Glass
[U-Boot] [PATCH v3 18/23] tegra: Turn off power detect in board init Simon Glass
[U-Boot] [PATCH v3 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v3 20/23] fdt: tegra: Add EMC node to device tree Simon Glass
[U-Boot] [PATCH v3 21/23] tegra: i2c: Add function to find DVC bus Simon Glass
[U-Boot] [PATCH v3 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Simon Glass
[U-Boot] [PATCH v3 23/23] tegra: Enable LP0 on Seaboard Simon Glass
[U-Boot] [PATCH 1/2] cmd_sf: let "sf update" erase last sector as a whole Simon Glass
[U-Boot] [PATCH 2/2] cmd_sf: "sf update" preserve the final part of the last sector Simon Glass
[U-Boot] [PATCH v3 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Simon Glass
[U-Boot] [PATCH v2 06/18] net: Refactor ping receive handler Simon Glass
[U-Boot] [PATCH v2 07/18] net: Refactor to use NetSendPacket instead of eth_send directly Simon Glass
[U-Boot] [PATCH v2 08/18] net: Refactor to protect access to the NetState variable Simon Glass
[U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands Simon Glass
[U-Boot] [PATCH v3 4/4] sandbox: Add basic test for command execution Simon Glass
[U-Boot] [PATCH v3 2/6] env: make himport_r() selective on variables Simon Glass
[U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script Simon Glass
[U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script Simon Glass
[U-Boot] [PATCH v3 05/23] Add AES crypto library Simon Glass
[U-Boot] [PATCH v4 05/23] Add AES crypto library Simon Glass
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v4 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Simon Glass
[U-Boot] [PATCH v3 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Simon Glass
[U-Boot] [PATCH] Move bootstage timer out of lib/time.c Simon Glass
[U-Boot] [PATCH v3 1/4] Add run_command_list() to run a list of commands Simon Glass
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Simon Glass
[U-Boot] [PATCH v3 04/23] i2c: Add TPS6586X driver Simon Glass
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v3 10/23] tegra: Add tegra_get_chip_type() to detect SKU Simon Glass
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Simon Glass
[U-Boot] [PATCH v4 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Simon Glass
[U-Boot] [PATCH v3 04/23] i2c: Add TPS6586X driver Simon Glass
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v3 15/23] tegra: Add warmboot implementation Simon Glass
[U-Boot] [PATCH v5 15/23] tegra: Add warmboot implementation Simon Glass
[U-Boot] [PATCH v5 19/23] tegra: Add EMC settings for Seaboard Simon Glass
[U-Boot] [PATCH v4 2/6] fdt: Add support for embedded device tree (CONFIG_OF_EMBED) Simon Glass
[U-Boot] CONFIG_SYS_FDT_PAD: Why do we need this? Simon Glass
[U-Boot] [PATCH v2 09/18] net: Refactor to separate the UDP handler from the ARP handler Simon Glass
[U-Boot] [PATCH v2 10/18] net: Add NetUpdateEther() to handle ARP and Ping replies Simon Glass
[U-Boot] [PATCH v2 11/18] net: Don't write the "serverip" env var if configured not to Simon Glass
[U-Boot] [PATCH v2 12/18] net: Fix unused variable compile warning Simon Glass
[U-Boot] [PATCH v2 13/18] net: Add option CONFIG_BOOTP_MAY_FAIL Simon Glass
[U-Boot] [PATCH v2 15/18] net: Remove unused parameter from NetInitLoop() Simon Glass
[U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings Simon Glass
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH 3/6] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] device tree compilation problems. Simon Glass
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH v2 0/7] tegra: Add NAND flash support Simon Glass
[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers Simon Glass
[U-Boot] [PATCH v2 2/7] fdt: Add debugging to fdtdec_get_int/addr() Simon Glass
[U-Boot] [PATCH v2 3/7] tegra: Add NAND support to funcmux Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v2 5/7] tegra: fdt: Add NAND definitions to fdt Simon Glass
[U-Boot] [PATCH v2 6/7] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH v2 7/7] tegra: Enable NAND on Seaboard Simon Glass
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Simon Glass
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Simon Glass
[U-Boot] [PATCH v3 1/7] nand: Try to align the default buffers Simon Glass
[U-Boot] [PATCH v3 2/7] fdt: Add debugging to fdtdec_get_int/addr() Simon Glass
[U-Boot] [PATCH v3 3/7] tegra: Add NAND support to funcmux Simon Glass
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v3 5/7] tegra: fdt: Add NAND definitions to fdt Simon Glass
[U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver Simon Glass
[U-Boot] [PATCH v3 7/7] tegra: Enable NAND on Seaboard Simon Glass
[U-Boot] [PATCH v4 0/10] tegra: Enable keyboard with matrix keyboard driver Simon Glass
[U-Boot] [PATCH v4 01/10] fdt: Add fdtdec functions to read byte array Simon Glass
[U-Boot] [PATCH v4 02/10] input: Add linux/input.h for key code support Simon Glass
[U-Boot] [PATCH v4 03/10] input: Add generic keyboard input handler Simon Glass
[U-Boot] [PATCH v4 04/10] input: Add support for keyboard matrix decoding from an fdt Simon Glass
[U-Boot] [PATCH v4 05/10] tegra: Add keyboard support to funcmux Simon Glass
[U-Boot] [PATCH v4 06/10] tegra: fdt: Add keyboard controller definition Simon Glass
[U-Boot] [PATCH v4 07/10] tegra: fdt: Add keyboard definitions for Seaboard Simon Glass
[U-Boot] [PATCH v4 08/10] tegra: Add tegra keyboard driver Simon Glass
[U-Boot] [PATCH v4 09/10] tegra: Switch on console mux and use environment for console Simon Glass
[U-Boot] [PATCH v4 10/10] tegra: Enable keyboard for Seaboard Simon Glass
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Simon Glass
[U-Boot] [PATCH] fdt: avoid bad MAKEALL status Simon Glass
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Simon Glass
[U-Boot] [PATCH] fdt: Adjust Makefile to find .dtsi include files Simon Glass
[U-Boot] [ARM] [STATUS] Increasingly high build failures Simon Glass
[U-Boot] [PATCH] tegra: Correct PLL access in ap20.c and clock.c Simon Glass
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Simon Glass
[U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Simon Glass
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Simon Glass
[U-Boot] [PATCH] fdt: avoid bad MAKEALL status Simon Glass
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Simon Glass
[U-Boot] [PATCH v4 10/10] tegra: Enable keyboard for Seaboard Simon Glass
[U-Boot] [PATCH v2 16/18] net: Fix net buffer initialization Simon Glass
[U-Boot] [PATCH v2 17/18] net: Make sure NetLoop is initialized when using NetConsole Simon Glass
[U-Boot] [PATCH v2 18/18] net: Don't copy every packet that waits for an ARP Simon Glass
[U-Boot] [PATCH v2 3/3] net: Work-around for brain-damaged Cisco equipment with arp-proxy Simon Glass
[U-Boot] [PATCH v2 01/21] net: Remove CMD_PING where there's no CMD_NET Simon Glass
[U-Boot] [PATCH v2 02/21] net: Remove redefinitions of net.h functions Simon Glass
[U-Boot] [PATCH v2 03/21] net: Move MAC-seeded rand out of bootp.c Simon Glass
[U-Boot] [PATCH v2 04/21] net: Move CDP out of net.c Simon Glass
[U-Boot] [PATCH v2 05/21] net: Encapsulate CDP packet identification Simon Glass
[U-Boot] [PATCH v2 06/21] net: Move ARP out of net.c Simon Glass
[U-Boot] [PATCH v2 07/21] net: Move PING out of net.c Simon Glass
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Simon Glass
[U-Boot] 'run' no longer aborts on an error, can someone please verify Simon Glass
[U-Boot] Sandbox question Simon Glass
[U-Boot] Sandbox cannot be built without HUSH Simon Glass
[U-Boot] 'run' no longer aborts on an error, can someone please verify Simon Glass
[U-Boot] [PATCH] Fix the behaviour of the 'run' command Simon Glass
[U-Boot] 'run' no longer aborts on an error, can someone please verify Simon Glass
[U-Boot] [PATCH 1/2] part_dos: allocate cacheline aligned buffers Simon Glass
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Simon Glass
[U-Boot] [PATCH 1/4] patman: Fix a typo error Simon Glass
[U-Boot] [PATCH 2/4] patman: Add meaningful statements instead of blah blah Simon Glass
[U-Boot] [PATCH 3/4] patman: Change the location of patman path in README Simon Glass
[U-Boot] PATCH 4/4] patman: Handle searching of patman config Simon Glass
[U-Boot] [PATCH 0/4] Cleanups/fixes in patman tool Simon Glass
[U-Boot] [PATCH v2 08/21] net: Move RARP receive logic out of net.c Simon Glass
[U-Boot] [PATCH v2 09/21] net: cosmetic: Un-typedef IP_t Simon Glass
[U-Boot] [PATCH v2 10/21] net: cosmetic: Un-typedef Ethernet_t Simon Glass
[U-Boot] [PATCH v2 11/21] net: cosmetic: Un-typedef VLAN_Ethernet_t Simon Glass
[U-Boot] [PATCH v2 12/21] net: cosmetic: Un-typedef ARP_t Simon Glass
[U-Boot] [PATCH v2 14/21] net: cosmetic: Rename parameter len to payload_len Simon Glass
[U-Boot] [PATCH v2 15/21] net: cosmetic: Add a more explicit comment about 802.2 Simon Glass
[U-Boot] [PATCH v2 16/21] net: cosmetic: Rename "x" to "eth_proto" Simon Glass
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Simon Glass
[U-Boot] [PATCH v2 17/21] net: cosmetic: Rename CDPHandler to CDPReceive Simon Glass
[U-Boot] [PATCH v2 18/21] net: cosmetic: Rename OPT_SIZE to OPT_FIELD_SIZE Simon Glass
[U-Boot] [PATCH v2 19/21] net: cosmetic: Alphabetize includes in net.c Simon Glass
[U-Boot] [PATCH v2 20/21] net: cosmetic: Rename tmp to reply_ip_addr in arp.c Simon Glass
[U-Boot] [PATCH v2 21/21] net: cosmetic: Replace magic numbers in arp.c with constants Simon Glass
[U-Boot] [PATCH v2 13/21] net: cosmetic: Un-typedef ICMP_t Simon Glass
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Simon Glass
[U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config Simon Glass
[U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config Simon Glass
[U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Simon Glass
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Govindraj
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Igor Grinberg
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Igor Grinberg
[U-Boot] [PATCH] cm-t35: fix Ethernet reset timing Igor Grinberg
[U-Boot] [PATCH 05/08] omap3: Introduce weak misc_init_r Igor Grinberg
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Igor Grinberg
[U-Boot] Booting a dt zImage kernel Shawn Guo
[U-Boot] [PATCH] e1000e : Set Receive Threshold granularity to number of Ruchika Gupta
[U-Boot] [PATCHv2] e1000e : Correct Rx Threshold granularity Ruchika Gupta
[U-Boot] [PATCH 14/14] CMD: Fix CONFIG_CMD_STORAGE -> CONFIG_CMD_USB_STORAGE Anatolij Gustschin
[U-Boot] [PATCH 00/11] MIPS: fixes and updates Anatolij Gustschin
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Anatolij Gustschin
[U-Boot] [PATCH v3 2/4] ARM: EXYNOS: add data structure for EXYNOS display driver Anatolij Gustschin
[U-Boot] [PATCH v3 0/4] ARM: EXYNOS: add display driver for EXYNOS SoC Anatolij Gustschin
[U-Boot] [PATCH 3/7] LCD: add data structure for EXYNOS display driver Anatolij Gustschin
[U-Boot] [PATCH 4/7] EXYNOS: support EXYNOS framebuffer and FIMD display drivers. Anatolij Gustschin
[U-Boot] [PATCH 5/7] EXYNOS: support EXYNOS MIPI DSI interface driver. Anatolij Gustschin
[U-Boot] [PATCH 6/7] LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI. Anatolij Gustschin
[U-Boot] [PATCH 7/7] EXYNOS: support TRATS board display function Anatolij Gustschin
[U-Boot] [PATCH v2 3/7] LCD: add data structure for EXYNOS display driver Anatolij Gustschin
[U-Boot] [PATCH v2 4/7] EXYNOS: support EXYNOS framebuffer and FIMD display drivers. Anatolij Gustschin
[U-Boot] [PATCH v2 5/7] EXYNOS: support EXYNOS MIPI DSI interface driver. Anatolij Gustschin
[U-Boot] [PATCH v2 6/7] LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI. Anatolij Gustschin
[U-Boot] [PATCH v2 7/7] EXYNOS: support TRATS board display function Anatolij Gustschin
[U-Boot] [PATCH v2 0/7] EXYNOS: support display drivers Anatolij Gustschin
[U-Boot] [PATCH v2] configs: EB+MCF-EV123.h: Fix typo on CONFIG_SYS_HUSH_PARSER Anatolij Gustschin
[U-Boot] [PATCH] Move bootstage timer out of lib/time.c Anatolij Gustschin
[U-Boot] [PATCH v2] mkenvimage: Fix compiler warning Anatolij Gustschin
[U-Boot] [PATCH] README: supported boards are in boards.cfg, not Makefile Anatolij Gustschin
[U-Boot] [PATCH] drivers/mtd/spr_smi.c: Fix build warning Anatolij Gustschin
[U-Boot] [PATCH] drivers/mtd/onenand/onenand_base.c: fix build warning Anatolij Gustschin
[U-Boot] Pull request: u-boot-staging Anatolij Gustschin
[U-Boot] [PATCH] drivers/mtd/onenand/onenand_base.c: fix build warning Anatolij Gustschin
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Anatolij Gustschin
[U-Boot] [PATCH 1/2] part_dos: align disk buffers on cache line to enable DMA and cache Anatolij Gustschin
[U-Boot] [PATCH V3]fs/fat: align disk buffers on cache line to enable DMA and cache Anatolij Gustschin
[U-Boot] [PATCH V2] fs/fat: align disk buffers on cache line to enable DMA and cache Anatolij Gustschin
[U-Boot] [PATCH] EXYNOS: Change bits per pixel value proper for u-boot. Anatolij Gustschin
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Anatolij Gustschin
[U-Boot] [PATCH 1/2] LCD: drawing 32bpp uncompressed bitmap image Anatolij Gustschin
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Anatolij Gustschin
[U-Boot] [PATCH] LCD: change s6e8ax0 panel gamma value Anatolij Gustschin
[U-Boot] [PATCH] Remove remaining mdelay() macros Anatolij Gustschin
[U-Boot] [PATCH 2/2] P4080/PBL: add tool to support pbl image build. Anatolij Gustschin
[U-Boot] [PATCH v2 1/2] igep00x0: enable the use of a plain text file Anatolij Gustschin
[U-Boot] [PATCH v2 2/2] igep00x0: change mpurate from 500 to auto Anatolij Gustschin
[U-Boot] [u-boot][PATCH 0/2] igep00x0: updates for IGEP boards Anatolij Gustschin
[U-Boot] [PATCH v2] TRATS: initialize panel_info data structure in board file Anatolij Gustschin
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Anatolij Gustschin
[U-Boot] [PATCH] i.MX25: Prepare for LCD driver in board adaptation Anatolij Gustschin
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Anatolij Gustschin
[U-Boot] [PATCH] i.MX2: Support splash screen Anatolij Gustschin
[U-Boot] [PATCH] i.MX25: lcdc: Add register definitions Anatolij Gustschin
[U-Boot] [PATCH] i.MX25: Prepare for LCD driver in board adaptation Anatolij Gustschin
[U-Boot] [PATCH v3 4/4] lin_gadget: use common linux/compat.h Anatolij Gustschin
[U-Boot] [PATCH 1/4] gunzip: rename z{alloc, free} to gz{alloc, free} Anatolij Gustschin
[U-Boot] [PATCH 2/4] lin_gadget: use common mdelay Anatolij Gustschin
[U-Boot] [PATCH 3/4] linux/compat.h: rename from linux/mtd/compat.h Anatolij Gustschin
[U-Boot] [PATCH] i.MX2: Support splash screen Anatolij Gustschin
[U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup Anatolij Gustschin
[U-Boot] [PATCH] include/video.h: drop unused video_printf() Anatolij Gustschin
[U-Boot] [PATCH] cmd_bmp.c: make bmp_display() usable by drivers or board code Anatolij Gustschin
[U-Boot] [PATCH 1/3] common/lcd.c: use ARRAY_SIZE Anatolij Gustschin
[U-Boot] [PATCH 2/3] common/lcd.c: reduce some CONFIG_LCD_*_LOGO ifdefs Anatolij Gustschin
[U-Boot] [PATCH 3/3] common/lcd.c: reduce one CONFIG_LCD_LOGO ifdef Anatolij Gustschin
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Anatolij Gustschin
[U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup Anatolij Gustschin
[U-Boot] [PATCH v2 3/3] EXYNOS: display 32bpp bitmap TIZEN logo Anatolij Gustschin
[U-Boot] [PATCH v3 4/4] lin_gadget: use common linux/compat.h Anatolij Gustschin
[U-Boot] Pull request: u-boot-staging Anatolij Gustschin
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Anatolij Gustschin
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Anatolij Gustschin
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Anatolij Gustschin
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Anatolij Gustschin
[U-Boot] [PATCH v5] net: allow setting env enetaddr from net device setting Rob Herring
[U-Boot] Undefined results when building highbank board Rob Herring
[U-Boot] [PATCH 00/28] Add link-local addressing support Joe Hershberger
[U-Boot] [PATCH v2] mvgbe: remove warning for unused methods Joe Hershberger
[U-Boot] A few things for the release? Joe Hershberger
[U-Boot] A few things for the release? Joe Hershberger
[U-Boot] [PATCH 1/2] net: punt bd->bi_ip_addr Joe Hershberger
[U-Boot] [PATCH 2/2] net: move bootfile init into eth_initialize Joe Hershberger
[U-Boot] [PATCH v4] net: allow setting env enetaddr from net device setting Joe Hershberger
[U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole Joe Hershberger
[U-Boot] Pull request: u-boot-net Joe Hershberger
[U-Boot] [PATCH 1/4] net: ll_temac: Add LL TEMAC driver to u-boot Joe Hershberger
[U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation Joe Hershberger
[U-Boot] [PATCH 3/4] microblaze: Add faked LL_TEMAC driver configuration Joe Hershberger
[U-Boot] [PATCH 4/4] microblaze: Wire up LL_TEMAC driver initialization Joe Hershberger
[U-Boot] [PATCH V2 1/8] net/designware: Fix to restore hw mac address Joe Hershberger
[U-Boot] [PATCH V2 2/8] net/designware: Fix the max frame length size Joe Hershberger
[U-Boot] [PATCH V2 5/8] net/designware: Try configuring phy on each dw_eth_init Joe Hershberger
[U-Boot] [PATCH V2 6/8] net/designware: Program phy registers when auto-negotiation is ON Joe Hershberger
[U-Boot] [PATCH V2 7/8] net/designware: Set ANAR to 0x1e1 Joe Hershberger
[U-Boot] [PATCH V2 8/8] net/designware: Change timeout loop implementation Joe Hershberger
[U-Boot] [PATCH V2 3/8] net/designware: Phy address fix Joe Hershberger
[U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole Joe Hershberger
[U-Boot] MMC is broken on mx28evk Lauri Hintsala
[U-Boot] MXS NAND: DMA read error Lauri Hintsala
[U-Boot] MXS NAND: DMA read error Lauri Hintsala
[U-Boot] MXS NAND: DMA read error Lauri Hintsala
[U-Boot] MXS NAND: DMA read error Lauri Hintsala
[U-Boot] [PATCH] mx28evk: add NAND support Lauri Hintsala
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Jeroen Hofstee
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Jeroen Hofstee
[PATCH] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Gabriel Huau
[PATCH v2] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Gabriel Huau
[U-Boot] Add support for Mini2440 Gabriel Huau
[U-Boot] [PATCH V2] Add support for Mini2440 Gabriel Huau
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Gabriel Huau
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Gabriel Huau
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Gabriel Huau
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 Gabriel Huau
[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific Gabriel Huau
[U-Boot] [PATCH 2/2 v4] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific Gabriel Huau
[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [PATCH 1/2] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 2/2 v5] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [PATCH 1/2 v2] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 1/2] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [PATCH 2/2 v6] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [PATCH 1/2 v3] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 2/2 v7] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 1/2] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 1/2 v3] Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 2/2 v7] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 2/2 v8] Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440 Gabriel Huau
[U-Boot] [PATCH 2/2 v9] ARM : Add support for MINI2440 (s3c2440). Gabriel Huau
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Gabriel Huau
[U-Boot] [U-Boot-Users] Re: Ethernet loopback command Ramappa Hugar
[U-Boot] [PATCH] i.MX6: arm2: Add AXI cache and Qos setting Liu Hui-R64343
[U-Boot] [PATCH 2/4] mx6qsabrelite: Allow booting a zImage kernel Liu Hui-R64343
[U-Boot] [PATCH 3/4] mx6qarm2: Allow booting a zImage kernel Liu Hui-R64343
[U-Boot] [PATCH 2/4] mx6qsabrelite: Allow booting a zImage kernel Liu Hui-R64343
[U-Boot] [PATCH 05/14] CMD: Drop CONFIG_CMD_DFL, it's not used Nobuhiro Iwamatsu
[U-Boot] [PATCH] sh: Fix rsk7264 pin setup for on-board ethernet Nobuhiro Iwamatsu
[U-Boot] [PATCH] sh: ecovec: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Nobuhiro Iwamatsu
[U-Boot] Pull request: u-boot-sh Nobuhiro Iwamatsu
[U-Boot] [PATCH] nds32: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Nobuhiro Iwamatsu
[U-Boot] [PATCH] arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Nobuhiro Iwamatsu
[U-Boot] [PATCH] arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Nobuhiro Iwamatsu
[U-Boot] [SOT] linker scripts Jason
[U-Boot] [PATCH v3 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Olof Johansson
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Olof Johansson
[U-Boot] ARM Cortext 9 AMP mode support Tushar K
[U-Boot] ARM Cortex 9 AMP mode support Tushar K
[U-Boot] ARM Cortex 9 AMP mode support Tushar K
[U-Boot] FW: I want to use Barebox ANDY KENNEDY
[U-Boot] FW: I want to use Barebox ANDY KENNEDY
[U-Boot] [U-boot] Help: Tegra250 board(harmony) Ethernet driver YONGKI KIM
[U-Boot] [PATCH] TRATS: modify the trats's configuration Minkyu Kang
[U-Boot] [PATCH v2] EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc Minkyu Kang
[U-Boot] [RESEND PATCH] ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement Minkyu Kang
[U-Boot] [PATCH v2 1/4] ARM: EXYNOS: definition of system registers Minkyu Kang
[U-Boot] [PATCH v2 3/4] ARM: EXYNOS: add exynos lcd clock interface Minkyu Kang
[U-Boot] [PATCH v2 4/4] ARM: EXYNOS: support EXYNOS display driver Minkyu Kang
[U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device Minkyu Kang
[U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device Minkyu Kang
[U-Boot] [PATCH] SMDK5250: fix compiler warning Minkyu Kang
[U-Boot] [PATCH v3 0/4] ARM: EXYNOS: add display driver for EXYNOS SoC Minkyu Kang
[U-Boot] [PATCH 1/7] EXYNOS: definitions of system resgister and power management registers. Minkyu Kang
[U-Boot] [PATCH] SMDK5250: fix compiler warning Minkyu Kang
[U-Boot] [PATCH v2 0/7] EXYNOS: support display drivers Minkyu Kang
[U-Boot] [PATCH v5 3/4] mmc: support the sdhci instead of s5p_mmc for samsung-soc Minkyu Kang
[U-Boot] [PATCH v5 4/4] ARM: SAMSUNG: support sdhci controller Minkyu Kang
[U-Boot] [PATCH v5 4/4] ARM: SAMSUNG: support sdhci controller Minkyu Kang
[U-Boot] [PATCH] mmc:fix Call mmc_init() when executing mmc_get_dev() Minkyu Kang
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Minkyu Kang
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Minkyu Kang
[U-Boot] [PATCH] EXYNOS: Change bits per pixel value proper for u-boot. Minkyu Kang
[U-Boot] please pull u-boot-samsung/master Minkyu Kang
[U-Boot] [PATCH] Exynos: fix cpuinfo and cpu detecting Minkyu Kang
[U-Boot] [PATCH v2 2/3] LCD: add compressed 32bpp BMP image data Minkyu Kang
[U-Boot] [PATCH v2 3/3] EXYNOS: display 32bpp bitmap TIZEN logo Minkyu Kang
[U-Boot] Introducing myself Timo Ketola
[U-Boot] [PATCH 0/8] i.MX25: Miscellaneus fixes Timo Ketola
[U-Boot] [PATCH 1/8] i.MX25: add mxc_get_clock infrastructure Timo Ketola
[U-Boot] [PATCH 2/8] i.MX: Add target flashable to offset 0 Timo Ketola
[U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Timo Ketola
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Timo Ketola
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Timo Ketola
[U-Boot] [PATCH 7/8] MXC NAND: Place BBT patterns into free OOB region Timo Ketola
[U-Boot] [PATCH 8/8] i.MX25: This model has almost the same USB-controller as i.MX31 Timo Ketola
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Timo Ketola
[U-Boot] [PATCH 2/8] i.MX: Add target flashable to offset 0 Timo Ketola
[U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Timo Ketola
[U-Boot] [PATCH 3/8] Build: Ignore build tree and IDE control file Timo Ketola
[U-Boot] [PATCH 6/8] i.MX25: Add Exertus EXE4026 board Timo Ketola
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Timo Ketola
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Timo Ketola
[U-Boot] [PATCH 0/9 v2] i.MX25: Miscellaneus fixes Timo Ketola
[U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
[U-Boot] [PATCH 2/9] i.MX25: This architecture has a GPIO4 too Timo Ketola
[U-Boot] [PATCH 3/9] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Timo Ketola
[U-Boot] [PATCH 5/9] i.MX25: This architecture has almost the same USB-controller as i.MX31 Timo Ketola
[U-Boot] [PATCH 6/9] imx: usb: There is no such register Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH 8/9] imx: nand: Don't invent new configuration variable Timo Ketola
[U-Boot] [PATCH 9/9] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Timo Ketola
[U-Boot] [PATCH 8/9] imx: nand: Don't invent new configuration variable Timo Ketola
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Timo Ketola
[U-Boot] Introducing myself Timo Ketola
[U-Boot] Introducing myself Timo Ketola
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Timo Ketola
[U-Boot] [PATCH 0/8 v3] i.MX25: Miscellaneus fixes Timo Ketola
[U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
[U-Boot] [PATCH 2/9] i.MX25: This architecture has a GPIO4 too Timo Ketola
[U-Boot] [PATCH 3/9] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH 4/9] imx: nand: Support flash based BBT Timo Ketola
[U-Boot] [PATCH 5/9] i.MX25: This architecture has almost the same USB-controller as i.MX31 Timo Ketola
[U-Boot] [PATCH 6/9] imx: usb: There is no such register Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH 8/9] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
[U-Boot] [PATCH 0/8 v3] i.MX25: Miscellaneus fixes Timo Ketola
[U-Boot] [PATCH 0/1] i.MX2: Support splash screen Timo Ketola
[U-Boot] [PATCH] i.MX2: Support splash screen Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH 6/9] imx: usb: There is no such register Timo Ketola
[U-Boot] [PATCH 1/9] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH 7/9] imx: esdhc: Needed to use in imx-regs.h defined address Timo Ketola
[U-Boot] [PATCH V4 0/8] i.MX25: Preparing new board with miscellaneus fixes Timo Ketola
[U-Boot] [PATCH V4 1/8] i.MX25: esdhc: Add mxc_get_clock infrastructure Timo Ketola
[U-Boot] [PATCH V4 2/8] i.MX25: This architecture has a GPIO4 too Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH V4 4/8] imx: nand: Support flash based BBT Timo Ketola
[U-Boot] [PATCH V4 5/8] i.MX25: usb: Set PORTSCx register Timo Ketola
[U-Boot] [PATCH V4 6/8] imx: usb: There is no such register Timo Ketola
[U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h Timo Ketola
[U-Boot] [PATCH V4 8/8] imx: Add u-boot.imx as target for ARM9 i.MX SOCs Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] [PATCH] i.MX25: Prepare for LCD driver in board adaptation Timo Ketola
[U-Boot] [PATCH] i.MX25: lcdc: Add register definitions Timo Ketola
[U-Boot] 'run' no longer aborts on an error, can someone please verify Timo Ketola
[U-Boot] 'run' no longer aborts on an error, can someone please verify Timo Ketola
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Timo Ketola
[U-Boot] 'run' no longer aborts on an error, can someone please verify Timo Ketola
[U-Boot] [PATCH] Fix the behaviour of the 'run' command Timo Ketola
[U-Boot] [PATCH] i.MX25: Prepare for LCD driver in board adaptation Timo Ketola
[U-Boot] [PATCH] i.MX2: Support splash screen Timo Ketola
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Vasily Khoruzhick
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Vasily Khoruzhick
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Vasily Khoruzhick
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440) Vasily Khoruzhick
[U-Boot] [PATCH 5/8] MXC FEC: Resolve speed before configuring gasket Troy Kisky
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Troy Kisky
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Troy Kisky
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Troy Kisky
[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket Troy Kisky
[U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file Troy Kisky
[U-Boot] [PATCH 2/3] mx6qsabrelite: add i2c support Troy Kisky
[U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start Troy Kisky
[U-Boot] [PATCH] openrisc/cache: disable icache during invalidation Stefan Kristiansson
[U-Boot] [PATCH 1/3] omap4: panda: disable uart2 pads during boot Tero Kristo
[U-Boot] [PATCH 2/3] omap4: do not enable fs-usb module Tero Kristo
[U-Boot] [PATCH 3/3] omap4: do not enable auxiliary cores Tero Kristo
[U-Boot] [PATCH 0/3] omap4: panda: fixes for core retention Tero Kristo
[U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard Christian Kroehnert
[U-Boot] [PATCH] mkenvimage: Fix compiler warning Horst Kronstorfer
[U-Boot] [PATCH] MIPS: Add initial support for EMMA3SL/LP Shinya Kuribayashi
[U-Boot] [PATCH 0/3] MIPS: fixes for 2012.04-rc1 Shinya Kuribayashi
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Shinya Kuribayashi
[U-Boot] [PATCH] driver/mtd: IFC NAND: Add support of ONFI NAND flash Prabhakar Kushwaha
[U-Boot] [PATCH] driver/mtd:IFC: Fix possible memory leak Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc:Fix return type & parameter passed for I/O functions Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc: Fix declaration type for I/O functions Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/mpc85xx:Add BSC9131 RDB Support Prabhakar Kushwaha
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Prabhakar Kushwaha
[U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information Prabhakar Kushwaha
[U-Boot] [PATCH][v2] powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support Prabhakar Kushwaha
[U-Boot] [PATCH][v2] powerpc/mpc85xx:Add BSC9131 RDB Support Prabhakar Kushwaha
[U-Boot] [PATCH 1/4][v4] doc:Add documentation for e500 external debugger support Prabhakar Kushwaha
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Prabhakar Kushwaha
[U-Boot] [PATCH 3/4][v4] powerpc/85xx:Make debug exception vector accessible Prabhakar Kushwaha
[U-Boot] [PATCH 4/4][v2] powerpc/85xx:Fix NAND code base to support debugger Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/mpc85xx:Add debugger support for P1010 and P1014 Prabhakar Kushwaha
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Prabhakar Kushwaha
[U-Boot] PATCH 1/4][v4] doc:Add documentation for e500 external debugger support Prabhakar Kushwaha
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Prabhakar Kushwaha
[U-Boot] [PATCH 3/4][v5] powerpc/85xx:Make debug exception vector accessible Prabhakar Kushwaha
[U-Boot] [PATCH 4/4][v3] powerpc/85xx:Fix NAND code base to support debugger Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/mpc85xx:Add debugger support for e500v2 SoC Prabhakar Kushwaha
[U-Boot] [PATCH] powerpc/mpc85xx:NAND_SPL:Avoid IFC/eLBC Base address setting Prabhakar Kushwaha
[U-Boot] [PATCH] ARM: AM33XX: Fix build error Prabhakar Lad
[U-Boot] [PATCH] ARM: AM33XX: Fix build error Prabhakar Lad
[U-Boot] [PATCH v5 4/4] ARM: SAMSUNG: support sdhci controller Prabhakar Lad
[U-Boot] [PATCH v3 1/3] mmc: sdhci: add the quirk for broken R1b response Terry Lambert
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Chunhe Lan
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Chunhe Lan
[U-Boot] [PATCH v2 0/4] ARM: EXYNOS: add display driver for EXYNOS SoC Donghwa Lee
[U-Boot] [PATCH v2 1/4] ARM: EXYNOS: definition of system registers Donghwa Lee
[U-Boot] [PATCH v2 2/4] ARM: EXYNOS: add data structure for EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH v2 3/4] ARM: EXYNOS: add exynos lcd clock interface Donghwa Lee
[U-Boot] [PATCH v2 4/4] ARM: EXYNOS: support EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH v3 0/4] ARM: EXYNOS: add display driver for EXYNOS SoC Donghwa Lee
[U-Boot] [PATCH v3 1/4] ARM: EXYNOS: definition of system registers Donghwa Lee
[U-Boot] [PATCH v3 2/4] ARM: EXYNOS: add data structure for EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH v3 3/4] ARM: EXYNOS: add exynos lcd clock interface Donghwa Lee
[U-Boot] [PATCH v3 4/4] ARM: EXYNOS: support EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH 0/2] ARM: EXYNOS: support MIPI DSI interface driver Donghwa Lee
[U-Boot] [PATCH 1/2]ARM: EXYNOS: add mipi dsi control operation Donghwa Lee
[U-Boot] [PATCH 2/2]ARM: EXYNOS: support mipi dsi driver Donghwa Lee
[U-Boot] [PATCH v3 0/4] ARM: EXYNOS: add display driver for EXYNOS SoC Donghwa Lee
[U-Boot] [PATCH v3 2/4] ARM: EXYNOS: add data structure for EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH 0/2] ARM: EXYNOS: support MIPI DSI interface driver Donghwa Lee
[U-Boot] [PATCH 0/7] EXYNOS: support display drivers Donghwa Lee
[U-Boot] [PATCH 1/7] EXYNOS: definitions of system resgister and power management registers. Donghwa Lee
[U-Boot] [PATCH 2/7] EXYNOS: add LCD and MIPI DSI clock interface. Donghwa Lee
[U-Boot] [PATCH 3/7] LCD: add data structure for EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH 4/7] EXYNOS: support EXYNOS framebuffer and FIMD display drivers. Donghwa Lee
[U-Boot] [PATCH 5/7] EXYNOS: support EXYNOS MIPI DSI interface driver. Donghwa Lee
[U-Boot] [PATCH 6/7] LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI. Donghwa Lee
[U-Boot] [PATCH 7/7] EXYNOS: support TRATS board display function Donghwa Lee
[U-Boot] [PATCH 7/7] EXYNOS: support TRATS board display function Donghwa Lee
[PATCH] PATCH v2: LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI Donghwa Lee
[U-Boot] [PATCH v2 0/7] EXYNOS: support display drivers Donghwa Lee
[U-Boot] [PATCH v2 1/7] EXYNOS: definitions of system resgister and power management registers. Donghwa Lee
[U-Boot] [PATCH v2 2/7] EXYNOS: add LCD and MIPI DSI clock interface. Donghwa Lee
[U-Boot] [PATCH v2 3/7] LCD: add data structure for EXYNOS display driver Donghwa Lee
[U-Boot] [PATCH v2 4/7] EXYNOS: support EXYNOS framebuffer and FIMD display drivers. Donghwa Lee
[U-Boot] [PATCH v2 5/7] EXYNOS: support EXYNOS MIPI DSI interface driver. Donghwa Lee
[U-Boot] [PATCH v2 6/7] LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI. Donghwa Lee
[U-Boot] [PATCH v2 7/7] EXYNOS: support TRATS board display function Donghwa Lee
[U-Boot] Question about toots/bmp_logo.c Donghwa Lee
[U-Boot] [PATCH 1/2] LCD: drawing 32bpp uncompressed bitmap image Donghwa Lee
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Donghwa Lee
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Donghwa Lee
[U-Boot] [PATCH] EXYNOS: Change bits per pixel value proper for u-boot. Donghwa Lee
[U-Boot] [PATCH 2/2] EXYNOS: draw 32bpp bitmap TIZEN logo Donghwa Lee
[U-Boot] [PATCH] LCD: change s6e8ax0 panel gamma value Donghwa Lee
[U-Boot] [PATCH] TRATS: initialize panel_info data structure in board file Donghwa Lee
[U-Boot] [PATCH v2] TRATS: initialize panel_info data structure in board file Donghwa Lee
[U-Boot] [PATCH v2 1/3] LCD: display 32bpp decompressed bitmap image Donghwa Lee
[U-Boot] [PATCH v2 2/3] LCD: add compressed 32bpp BMP image data Donghwa Lee
[U-Boot] [PATCH v2 3/3] EXYNOS: display 32bpp bitmap TIZEN logo Donghwa Lee
[U-Boot] [PATCH] LCD: support another s6e8ax0 panel type Donghwa Lee
[U-Boot] [PATCH v2 2/3] LCD: add compressed 32bpp BMP image data Donghwa Lee
[U-Boot] [PATCH v3 1/3] LCD: display 32bpp decompressed bitmap image Donghwa Lee
[U-Boot] [PATCH v3 2/3] TIZEN: create lib/tizen to common tizen library Donghwa Lee
[U-Boot] [PATCH v 3/3] EXYNOS: display 32bpp bitmap TIZEN logo Donghwa Lee
[U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320 Jamie Lentin
[PATCH 1/4] kirkwood: Rename dns325 to dnskw Jamie Lentin
[PATCH 2/4] kirkwood: Add support for the D-Link DNS-320 Jamie Lentin
[U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320 Jamie Lentin
[U-Boot] u-boot for sbc8641D ASMPmode Li, Chanjuan
[U-Boot] [PATCH v3 4/4] board/adp-ag102: add configuration of adp-ag102 Macpaul Lin
[U-Boot] [PATCH v3 3/4] board/adp-ag102: add board specific files Macpaul Lin
[U-Boot] [PATCH v3 1/4] nds32/ag102: add header support of ag102 soc Macpaul Lin
[U-Boot] [PATCH v3 2/4] nds32/ag102: add ag102 soc support Macpaul Lin
[U-Boot] Pull request: u-boot-nds32 Macpaul Lin
[U-Boot] Can anyone help me to solve the stack problem of U-boot? Urgent~ Macpaul Lin
[U-Boot] [PATCH v3 05/23] Add AES crypto library Yen Lin
[U-Boot] [PATCH v3 08/23] tegra: Add crypto library for warmboot code Yen Lin
[U-Boot] [PATCH v3 09/23] tegra: Add flow, gp_padctl, fuse, sdram headers Yen Lin
[U-Boot] [PATCH v3 15/23] tegra: Add warmboot implementation Yen Lin
[U-Boot] [PATCH v3 16/23] tegra: Setup PMC scratch info from ap20 setup Yen Lin
[U-Boot] [PATCH] net: ll_temac: drop obsolete "NAMESIZE" define Stephan Linz
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Stephan Linz
[U-Boot] usb showed wrong device count Bob Liu
[U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly Jason Liu
[U-Boot] [PATCH] i.MX6: Add ANATOP regulator init Jason Liu
[U-Boot] [PATCH] powerpc/p1010rdb: update mux config of p1010rdb board Shengzhou Liu
[U-Boot] [PATCH][SDK1.2] powerpc/p1010rdb: add readme document for p1010rdb Shengzhou Liu
[U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release Valentin Longchamp
[U-Boot] [PATCH 0/2] SPI flash update command Valentin Longchamp
[U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release Valentin Longchamp
[U-Boot] [PATCH v2 0/2] misc:pmic: Support for MAX8997 PMIC at Trats Samsung device Lukasz Majewski
[U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver Lukasz Majewski
[U-Boot] [PATCH v2 1/2] misc:pmic:max8997 MAX8997 support for PMIC driver Lukasz Majewski
[U-Boot] [PATCH] mmc:fix: Set mmc width according to MMC host capabilities Lukasz Majewski
[U-Boot] [PATCH] mmc:fix Call mmc_init() when executing mmc_get_dev() Lukasz Majewski
[U-Boot] Pull request: u-boot-onenand Lukasz Majewski
[U-Boot] [PATCH] usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file Lukasz Majewski
[U-Boot] [PATCH 0/4] usb:gadget:composite: Support for composite gadget framework Lukasz Majewski
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Lukasz Majewski
[U-Boot] [PATCH 2/4] usb:gadget:composite: Linux composite.{h/c} code adjustement for u-boot Lukasz Majewski
[U-Boot] [PATCH 3/4] usb:gadget: Wrapper for extracting usb_gadget from linux's device Lukasz Majewski
[U-Boot] [PATCH 4/4] usb:gadget: Extend device struct to device_data pointer Lukasz Majewski
[U-Boot] [PATCH] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH 0/6] usb:composite:download Composite download gadget Lukasz Majewski
[U-Boot] [PATCH 1/6] usb:composite:g_dnl: Composite gadget (g_dnl) for USB downloading functions Lukasz Majewski
[U-Boot] [PATCH 2/6] usb:g_dnl:f_usbd_thor: USB Download function to support THOR protocol Lukasz Majewski
[U-Boot] [PATCH 3/6] usb:g_dnl:thor: THOR protocol back end support for f_usbd_thor function Lukasz Majewski
[U-Boot] [PATCH 4/6] usb:command: Support for USB Download command Lukasz Majewski
[U-Boot] [PATCH 5/6] usb:g_dnl: Support for g_dnl download usb gadget for GONI board Lukasz Majewski
[U-Boot] [PATCH 6/6] usb:g_dnl: Support for g_dnl download usb gadget for TRATS board Lukasz Majewski
[U-Boot] [PATCH] usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file Lukasz Majewski
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Lukasz Majewski
[U-Boot] [PATCH 2/4] usb:gadget:composite: Linux composite.{h/c} code adjustement for u-boot Lukasz Majewski
[U-Boot] [PATCH] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH v2 0/3] usb:gadget:composite: Support for composite gadget framework Lukasz Majewski
[U-Boot] [PATCH v2 1/3] usb:gadget:composite USB composite gadget support Lukasz Majewski
[U-Boot] [PATCH v2 2/3] usb:gadget:composite: Support for composite at gadget.h Lukasz Majewski
[U-Boot] [PATCH v2 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH] drivers/mtd/onenand/onenand_base.c: fix build warning Lukasz Majewski
[U-Boot] [PATCH] drivers/mtd/onenand/onenand_base.c: fix build warning Lukasz Majewski
[U-Boot] [PATCH v2 1/3] usb:gadget:composite USB composite gadget support Lukasz Majewski
[U-Boot] [PATCH v3 0/3] usb:gadget:composite: Support for composite gadget framework Lukasz Majewski
[U-Boot] [PATCH v3 1/3] usb:gadget:composite USB composite gadget support Lukasz Majewski
[U-Boot] [PATCH v3 2/3] usb:gadget:composite: Support for composite at gadget.h Lukasz Majewski
[U-Boot] [PATCH v3 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH] mmc:fix Call mmc_init() when executing mmc_get_dev() Lukasz Majewski
[U-Boot] [PATCH v4 0/3] usb:gadget:composite: Support for composite gadget framework Lukasz Majewski
[U-Boot] [PATCH v4 1/3] usb:gadget:composite USB composite gadget support Lukasz Majewski
[U-Boot] [PATCH v4 2/3] usb:gadget:composite: Support for composite at gadget.h Lukasz Majewski
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Lukasz Majewski
[U-Boot] [PATCH] GCC4.6: Squash warnings in onenand_base.c Lukasz Majewski
[U-Boot] [RESEND 0/2] mmc:fix: MMC fixes for generic mmc driver running at GONI Lukasz Majewski
[U-Boot] [RESEND 1/2] mmc:fix: Set mmc width according to MMC host capabilities Lukasz Majewski
[U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev() Lukasz Majewski
[U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev() Lukasz Majewski
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Lukasz Majewski
[U-Boot] [RESEND 0/2] mmc:fix: MMC fixes for generic mmc driver running at GONI Lukasz Majewski
[U-Boot] [PATCH v4 0/3] usb:gadget:composite: Support for composite gadget framework Lukasz Majewski
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Lukasz Majewski
[U-Boot] [PATCH v4 1/3] usb:gadget:composite USB composite gadget support Lukasz Majewski
[U-Boot] [PATCH] misc:pmic:trats: Correct procedure of enabling/disabling USB regulators Lukasz Majewski
[U-Boot] [PATCH v2 4/4] lin_gadget: use common linux/compat.h Lukasz Majewski
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH v4 RESEND 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] [PATCH v4 RESEND 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Lukasz Majewski
[U-Boot] yaffs2 u-boot patching support Charles Manning
[U-Boot] [Yaffs] yaffs2 u-boot patching support Charles Manning
[U-Boot] Pull request: Integrate latest yaffs2 Charles Manning
[U-Boot] [Yaffs] yaffs2 u-boot patching support Charles Manning
[U-Boot] Pull request: Integrate latest yaffs2 Charles Manning
[U-Boot] Pull request: Integrate latest yaffs2 Charles Manning
[U-Boot] Pull request: Integrate latest yaffs2 Charles Manning
[U-Boot] Pull request: Integrate latest yaffs2 Charles Manning
[U-Boot] [PATCH 0/2] Replace yaffs2 with new version Charles Manning
[U-Boot] [PATCH 1/2] Blow away old yaffs2 code Charles Manning
[U-Boot] [PATCH 2/2] Patch in new yaffs2 Charles Manning
[U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms Allen Martin
[U-Boot] using different architecture / toolchain for SPL build Allen Martin
[U-Boot] using different architecture / toolchain for SPL build Allen Martin
[U-Boot] using different architecture / toolchain for SPL build Allen Martin
[U-Boot] Switching CPU between SPL and non-SPL build Allen Martin
[U-Boot] [PATCH 0/1] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Allen Martin
[U-Boot] [PATCH 1/1] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Allen Martin
[U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Allen Martin
[U-Boot] [PATCH] mkconfig: add support for SPL CPU Allen Martin
[U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Allen Martin
[U-Boot] [PATCH V2 1/2] arm: fix bootm with device tree Allen Martin
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Allen Martin
[U-Boot] [PATCH v4 10/10] tegra: Enable keyboard for Seaboard Allen Martin
[U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common Allen Martin
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Maupin, Chase
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Chase Maupin
[U-Boot] [RFC] Preventing overriding of serverip when set in environment by user Maupin, Chase
[U-Boot] Question: exported function Mark McGahan
[U-Boot] [PATCH] beagle: fix 'timed out in wait_for_bb' message in SPL Peter Meerwald
[U-Boot] [PATCH][v2]powerpc/85xx: Add USB device-tree fixup for various platforms Ramneek Mehresh
[U-Boot] read command Haneef Mohamed
[U-Boot] Porting u-boot for MPC8280 based board. Thirumalesha N
[U-Boot] Porting u-boot for MPC8280 based board. Thirumalesha N
[U-Boot] Porting u-boot for MPC8280 based board. Thirumalesha N
[U-Boot] [PATCH 0/4] Cosmetic changes in imx gpio driver Vikram Narayanan
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Vikram Narayanan
[U-Boot] [PATCH 2/3] imx: Use GPIO_TO_PORT macro instead of (gpio >> 5) Vikram Narayanan
[U-Boot] [PATCH 3/3] imx: Return gpio_set_value in gpio_direction_output Vikram Narayanan
[U-Boot] [PATCH 0/4] Cosmetic changes in imx gpio driver Vikram Narayanan
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Vikram Narayanan
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Vikram Narayanan
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro Vikram Narayanan
[U-Boot] [PATCH v2 0/4] imx: header/gpio driver cleanups Vikram Narayanan
[U-Boot] [PATCH v2 1/4] imx: Remove unneeded/repititive definitions from imx headers Vikram Narayanan
[U-Boot] [PATCH v2 2/4] imx: Add GPIO_TO_PORT macro in the mxc_gpio driver Vikram Narayanan
[U-Boot] [PATCH v2 3/4] imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5) Vikram Narayanan
[U-Boot] [PATCH v2 4/4] imx: Return gpio_set_value in gpio_direction_output Vikram Narayanan
[U-Boot] [PATCH 0/4] Cleanups/fixes in patman tool Vikram Narayanan
[U-Boot] [PATCH 1/4] patman: Fix a typo error Vikram Narayanan
[U-Boot] [PATCH 2/4] patman: Add meaningful statements instead of blah blah Vikram Narayanan
[U-Boot] [PATCH 3/4] patman: Change the location of patman path in README Vikram Narayanan
[U-Boot] PATCH 4/4] patman: Handle searching of patman config Vikram Narayanan
[U-Boot] [PATCH v2 0/4] patman fixes Vikram Narayanan
[U-Boot] [PATCH v2 1/4] patman: Fix a typo error Vikram Narayanan
[U-Boot] [PATCH v2 2/4] patman: Add meaningful statements instead of blah blah Vikram Narayanan
[U-Boot] [PATCH v2 3/4] patman: Change the location of patman path Vikram Narayanan
[U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config Vikram Narayanan
[U-Boot] [PATCH v2 2/4] patman: Add meaningful statements instead of blah blah Vikram Narayanan
[U-Boot] [PATCH v2 4/4] patman: Handle creation of patman config Vikram Narayanan
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Eric Nelson
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Eric Nelson
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Eric Nelson
[U-Boot] [PATCH V3]fs/fat: align disk buffers on cache line to enable DMA and cache Eric Nelson
[U-Boot] [PATCH] Add doc/README.kbd Eric Nelson
[U-Boot] [PATCH] Add doc/README.kbd Eric Nelson
[U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] [PATCH V3] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] Using sata on mx6qsabrelite Eric Nelson
[U-Boot] Using sata on mx6qsabrelite Eric Nelson
[U-Boot] [PATCH 2/2] i.MX6: mx6q_sabrelite: add SATA bindings Eric Nelson
[U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock() Eric Nelson
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Eric Nelson
[U-Boot] Using sata on mx6qsabrelite Eric Nelson
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled. Eric Nelson
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] [PATCH] ext2load: increase read speed Eric Nelson
[U-Boot] [PATCH, V2] Resend: i.MX6: add enable_sata_clock() Eric Nelson
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Eric Nelson
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Eric Nelson
[U-Boot] [PATCH v3 18/23] tegra: Turn off power detect in board init Wei Ni
[U-Boot] u-boot.bin is so large NiuHu
[U-Boot] ld fails with .bss / .rel.dyn overlap for 2011.12 Joey Oravec
[U-Boot] ld fails with .bss / .rel.dyn overlap for 2011.12 Joey Oravec
[U-Boot] i2c driver for arm926ejs - at91sam9m10g45 Wilson Perez
[U-Boot] [PATCH v6] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH] fix IDE_BUS(dev) macro Luka Perkov
[U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Luka Perkov
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Luka Perkov
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Luka Perkov
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Luka Perkov
[U-Boot] [PATCH] fix IDE_BUS(dev) macro Luka Perkov
[U-Boot] "make menuconfig" does not work Thomas Petazzoni
[U-Boot] "make menuconfig" does not work Thomas Petazzoni
[U-Boot] Missing ethernet Andy Pont
[U-Boot] [PATCH 0/5] Various x86 patches Andy Pont
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: David Purdy
[U-Boot] Marvell/Kirkwood: 6192 vs. 6281 - does U-Boot correctly distinguish between the two? David Purdy
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: David Purdy
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: David Purdy
[U-Boot] Marvell/Kirkwood: 6192 vs. 6281 - does U-Boot correctly distinguish between the two? David Purdy
[U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02 David Purdy
[U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02 David Purdy
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support David Purdy
[U-Boot] [PATCH] fix IDE_BUS(dev) macro David Purdy
[U-Boot] [PATCH] fix IDE_BUS(dev) macro David Purdy
[U-Boot] [PATCH] powerpc/85xx: Add USB device-tree fixup for various platforms Mehresh Ramneek-B31383
[U-Boot] [U-Boot-Users] Re: Ethernet loopback command Ramu
[U-Boot] [PATCH 1/2] part_dos: allocate cacheline aligned buffers Thierry Reding
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Thierry Reding
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Thierry Reding
[U-Boot] [PATCH 1/2] part_dos: allocate cacheline aligned buffers Thierry Reding
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Thierry Reding
[U-Boot] [PATCH 2/2] mmc: tegra: invalidate complete cachelines Thierry Reding
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Thierry Reding
[U-Boot] [PATCH] ext2load: increase read speed Thierry Reding
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Thierry Reding
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Thierry Reding
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Thierry Reding
[U-Boot] 'run' no longer aborts on an error, can someone please verify Gray Remlin
[U-Boot] [PATCH V2 12/24] SPEAr: Enable usb device high speed support Tom Rini
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Tom Rini
[U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012 Tom Rini
[U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012 Tom Rini
[U-Boot] [PATCH] hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT Tom Rini
[U-Boot] [PATCH] hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT Tom Rini
[U-Boot] Please pull u-boot-ti/next Tom Rini
[U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET. Tom Rini
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Tom Rini
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Tom Rini
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Tom Rini
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Tom Rini
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Tom Rini
[U-Boot] [PATCH] cm-t35: fix Ethernet reset timing Tom Rini
[U-Boot] [PATCH] hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT Tom Rini
[U-Boot] [RFC v0 0/11]: Add <configs/omap3_common.h> Tom Rini
[U-Boot] [RFC v0 08/11] omap3: Consolidate UART information in omap3_common.h Tom Rini
[U-Boot] [RFC v0 08/11] omap3: Consolidate UART information in omap3_common.h Tom Rini
[U-Boot] [PATCH 1/2] tricorder: Add UBIFS Tom Rini
[U-Boot] [PATCH] davinci/spi: allow usage of other chip selects and buses Tom Rini
[U-Boot] Please pull u-boot-ti/master Tom Rini
[U-Boot] [PATCH] ARM: AM33XX: Fix build error Tom Rini
[U-Boot] Q: How to enable debugging info in U-Boot.bin Tom Rini
[U-Boot] Regression due to: arm: Add Prep subcommand support to bootm Tom Rini
[U-Boot] [PATCH 00/08]: Config cleanups Tom Rini
[U-Boot] [PATCH 01/08] omap4: Remove CONFIG_SYS_MMC_SET_DEV Tom Rini
[U-Boot] [PATCH 02/08] omap4+: Remove CONFIG_ARCH_CPU_INIT Tom Rini
[U-Boot] [PATCH 03/08] omap5912osk: Remove empty misc_init_r Tom Rini
[U-Boot] [PATCH 04/08] omap730p2: Remove empty misc_init_r Tom Rini
[U-Boot] [PATCH 05/08] omap3: Introduce weak misc_init_r Tom Rini
[U-Boot] [PATCH 06/08] include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF Tom Rini
[U-Boot] [PATCH 07/08] include/configs: Remove CONFIG_SYS_64BIT_STRTOUL Tom Rini
[U-Boot] [PATCH 08/08] include/configs: Better utilize CONFIG_SYS_NO_FLASH Tom Rini
[U-Boot] [PATCH 08/08] include/configs: Better utilize CONFIG_SYS_NO_FLASH Tom Rini
[U-Boot] [PATCH 08/08] include/configs: Better utilize CONFIG_SYS_NO_FLASH Tom Rini
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Tom Rini
[U-Boot] [PATCH 2/2] arm: restore fdt_fixup_ethernet call to do_bootm_linux Tom Rini
[U-Boot] yaffs2 u-boot patching support Tom Rini
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Tom Rini
[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port Tom Rini
[U-Boot] Please pull u-boot-ti/next Tom Rini
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Tom Rini
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Rini
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Tom Rini
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Tom Rini
[U-Boot] [PATCH] cm-t35: add I2C multi-bus support Tom Rini
[U-Boot] [Yaffs] yaffs2 u-boot patching support Tom Rini
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Rini
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Rini
[U-Boot] Please pull u-boot-ti/master Tom Rini
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Rini
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Tom Rini
[U-Boot] [PATCH] CONFIG_SYS_BAUDRATE_TABLE: Place default into <config.h> Tom Rini
[U-Boot] Pull request: Integrate latest yaffs2 Tom Rini
[U-Boot] Pull request: Integrate latest yaffs2 Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there Tom Rini
[U-Boot] [PATCH] OMAP I2C: fix handling of alen = 0 Tom Rini
[U-Boot] [U-Boot-Users] Re: Ethernet loopback command Stefan Roese
[U-Boot] [U-Boot-Users] Re: Ethernet loopback command Stefan Roese
[U-Boot] [PATCH 01/11] st_smi: Add support for SPEAr SMI driver Stefan Roese
[U-Boot] [PATCH 3/8] powerpc: Adapt gdsys 405ep boards to platform changes Stefan Roese
[U-Boot] [PATCH v2 2/6] powerpc/ppc4xx: Make gdsys 405ep boards reset more generic Stefan Roese
[U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories Stefan Roese
[U-Boot] [PATCH v2 1/6] powerpc/ppc4xx: Adjust environment size on neo Stefan Roese
[U-Boot] [PATCH] powerpc/ppc4xx: Remove typedefs for gdsys FPGA Stefan Roese
[U-Boot] Please pull u-boot-ppc4xx/master Stefan Roese
[U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup Pali Rohár
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Pali Rohár
[U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup Pali Rohár
[U-Boot] [PATCH v2 00/11] Nokia RX-51 support Pali Rohár
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Pali Rohár
[U-Boot] [PATCH v2 02/11] Add power bus message definitions in twl4030.h Pali Rohár
[U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back Pali Rohár
[U-Boot] [PATCH v2 04/11] cfb_console: Add function console_clear and console_clear_line Pali Rohár
[U-Boot] [PATCH v2 05/11] cfb_console: Add functions for moving with cursor Pali Rohár
[U-Boot] [PATCH v2 06/11] cfb_console: Add support for some ANSI terminal escape codes Pali Rohár
[U-Boot] [PATCH v2 07/11] cfb_console: Ignore bell character Pali Rohár
[U-Boot] [PATCH v2 08/11] video: cfb_console: flush dcache for frame buffer in DRAM Pali Rohár
[U-Boot] [PATCH v2 09/11] New command clear: Clear the ANSI terminal Pali Rohár
[U-Boot] [PATCH v2 10/11] New config variable CONFIG_PREMONITOR Pali Rohár
[U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900 Pali Rohár
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Pali Rohár
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Pali Rohár
[U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back Pali Rohár
[U-Boot] [PATCH v2 05/11] cfb_console: Add functions for moving with cursor Pali Rohár
[U-Boot] [PATCH v2 06/11] cfb_console: Add support for some ANSI terminal escape codes Pali Rohár
[U-Boot] [PATCH v2 10/11] New config variable CONFIG_PREMONITOR Pali Rohár
[U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900 Pali Rohár
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Pali Rohár
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Pali Rohár
[U-Boot] [PATCH v4 0/6] Enable Thumb build for ARM platforms Måns Rullgård
[U-Boot] using different architecture / toolchain for SPL build Måns Rullgård
[U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM Graeme Russ
[U-Boot] Pull request: u-boot-x86/master Graeme Russ
[U-Boot] [STATUS] v2012.04-rc1 is out Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] [PATCH] Prevent malloc with size 0 Graeme Russ
[U-Boot] Q: How to enable debugging info in U-Boot.bin Graeme Russ
[U-Boot] [RFC][PATCH] INIT_FUNC - List madness Graeme Russ
[U-Boot] [RFC][PATCH] INIT_FUNC - List madness Graeme Russ
[U-Boot] [RFC][PATCH] INIT_FUNC - List madness Graeme Russ
[U-Boot] U-boot customized Graeme Russ
[U-Boot] [PATCH v5 4/4] ARM: SAMSUNG: support sdhci controller Graeme Russ
[U-Boot] U-boot customized Graeme Russ
[U-Boot] FW: I want to use Barebox Graeme Russ
[U-Boot] FW: I want to use Barebox Graeme Russ
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Graeme Russ
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Graeme Russ
[U-Boot] [PATCH 0/3] Initialisation Sequence Framework Graeme Russ
[U-Boot] [PATCH 1/3] init_func: Add fundamental framework Graeme Russ
[U-Boot] [PATCH 2/3] init_func: Add x86 support Graeme Russ
[U-Boot] [PATCH 3/3] init_func: Use for eNET board Graeme Russ
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Graeme Russ
[U-Boot] "make menuconfig" does not work Graeme Russ
[U-Boot] "make menuconfig" does not work Graeme Russ
[U-Boot] Pull request: Integrate latest yaffs2 Graeme Russ
[U-Boot] [PATCH 0/5] Various x86 patches Graeme Russ
[U-Boot] [PATCH 1/5] x86: Fix compilation on 64-built built machines Graeme Russ
[U-Boot] [PATCH 2/5] x86: Forward declate gd_t Graeme Russ
[U-Boot] [PATCH 3/5] x86: Put global data on the stack Graeme Russ
[U-Boot] [PATCH 4/5] x86: Remove duplicate PCI init Graeme Russ
[U-Boot] [PATCH 5/5] x86: Add ilog2 to bitops Graeme Russ
[U-Boot] [PATCH 0/5] Various x86 patches Graeme Russ
[U-Boot] Standalone Binary Viral Sachde
[U-Boot] Standalone Binary Viral Sachde
[U-Boot] [PATCH v4] AT91SAM9*: Change kernel address in dataflash to match u-boot's size Ulf Samuelsson
[U-Boot] [PATCH v9] usb: align buffers at cacheline Puneet Saxena
[U-Boot] [STATUS] v2012.04-rc1 is out Jens Scharsig
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Jens Scharsig
[U-Boot] [STATUS] v2012.04-rc2 and -rc3 are out Jens Scharsig
[U-Boot] [PATCH] eb_cpux9k2: fix chip select Jens Scharsig
[U-Boot] [PATCH] eb_cpux9k2: add ram target configuration Jens Scharsig
[U-Boot] [PATCH] eb_cpux9k2: fix chip select Jens Scharsig
[U-Boot] [PATCH 2/4] dfu: generic backend parts Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 2/3] usb/gadget: Add Device Firmware Upgrade (DFU) support. Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 3/3] beagle: Enable DFU support with stub functions for now Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Stefan Schmidt
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Stefan Schmidt
[U-Boot] [PATCH] arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT Heiko Schocher
[U-Boot] [PATCH] i2c: Add support for designware i2c controller Heiko Schocher
[U-Boot] [PATCH] sh: i2c: Add support I2C controller of SH7734 Heiko Schocher
[U-Boot] [PATCH] i2c:designware Turn off the ctrl when setting the speed Heiko Schocher
[U-Boot] [i2c] Pull request Heiko Schocher
[U-Boot] [PATCH 00/11] MIPS: fixes and updates Daniel Schwierzeck
[U-Boot] [PATCH 00/11] MIPS: fixes and updates Daniel Schwierzeck
[U-Boot] [PATCH 0/3] MIPS: fixes for 2012.04-rc1 Daniel Schwierzeck
[U-Boot] [PATCH 1/3] MIPS: board.c: fix init of flash data in bd_info Daniel Schwierzeck
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Daniel Schwierzeck
[U-Boot] [PATCH 3/3] MIPS: fix endianess handling Daniel Schwierzeck
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Daniel Schwierzeck
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Daniel Schwierzeck
[U-Boot] FW: P4080 target has 16G memory stability issues ... Robert Sciuk
[U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock Liu Shengzhou-B36685
[U-Boot] [PATCH] USB: S5P: Add ehci support Rajeshwari Shinde
[U-Boot] [PATCH 1/3] net/eth: set status to active before calling init Sebastian Andrzej Siewior
[U-Boot] [PATCH 3/3] net/tsec: Don't tell the link status if used with netconsole Sebastian Andrzej Siewior
[U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller. Graeme Smecher
[U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Daniel Stodden
[U-Boot] usb ethernet working on panda? Gary Thomas
[U-Boot] Missing ethernet Gary Thomas
[U-Boot] Missing ethernet Gary Thomas
[U-Boot] Missing ethernet Gary Thomas
[U-Boot] [PATCH v2] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS Tabi Timur-B04825
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] Prevent malloc with size 0 Joakim Tjernlund
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Joakim Tjernlund
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Joakim Tjernlund
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Joakim Tjernlund
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Joakim Tjernlund
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Joakim Tjernlund
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Joakim Tjernlund
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Joakim Tjernlund
[U-Boot] [PATCH 1/2] image: add support for Android's boot image format Aneesh V
[U-Boot] [STATUS] v2012.04-rc1 is out Marek Vasut
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH] LMB: Fix undefined lmb_reserve() on non-lmb platforms Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH V6] BOOT: Add "bootz" command to boot Linux zImage on ARM Marek Vasut
[U-Boot] [PATCH] LMB: Fix undefined lmb_reserve() on non-lmb platforms Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Marek Vasut
[U-Boot] [PATCH] mx6qsabrelite: Fix the serial console port Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE Marek Vasut
[U-Boot] [PATCH] i.MX28: Fix initial stack pointer position Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH 00/11] MIPS: fixes and updates Marek Vasut
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules Marek Vasut
[U-Boot] [PATCH 0/3] MIPS: fixes for 2012.04-rc1 Marek Vasut
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Marek Vasut
[U-Boot] [PATCH 2/4] net: round up before calling flush_cache Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] MMC is broken on mx28evk Marek Vasut
[U-Boot] MMC0: DMA transfer failed Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] MMC0: DMA transfer failed Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012 Marek Vasut
[U-Boot] [PATCH v8] usb: align buffers at cacheline Marek Vasut
[U-Boot] [PATCH V3 1/4] ARM1136: add cache flush and invalidate operations Marek Vasut
[U-Boot] [PATCH V2 2/4] ARM: 926ejs: use debug() for misaligned addresses Marek Vasut
[U-Boot] U-Boot build report @ Sat Mar 31 05:30:15 CEST 2012 Marek Vasut
[U-Boot] [PATCH v8] usb: align buffers at cacheline Marek Vasut
[U-Boot] MMC0: DMA transfer failed Marek Vasut
[U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller. Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH] usb: increase delay after port reset Marek Vasut
[U-Boot] [PATCH] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH] hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH V2 2/4] ARM: 926ejs: use debug() for misaligned addresses Marek Vasut
[U-Boot] [PATCH v3 1/6] env: unify logic to check and apply changes Marek Vasut
[U-Boot] [PATCH v3 2/6] env: make himport_r() selective on variables Marek Vasut
[U-Boot] [PATCH v3 3/6] env: add check/apply logic to himport_r() Marek Vasut
[U-Boot] [PATCH v3 3/6] env: add check/apply logic to himport_r() Marek Vasut
[U-Boot] [PATCH v3 4/6] env: check and apply changes on delete/destroy Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v3 5/6] env: make "env default" selective, check and apply Marek Vasut
[U-Boot] [PATCH v3 6/6] env: delete selected vars not present in imported env Marek Vasut
[U-Boot] [PATCH] Prevent malloc with size 0 Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v3 1/6] env: unify logic to check and apply changes Marek Vasut
[U-Boot] [PATCH v3 3/6] env: add check/apply logic to himport_r() Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v3 6/6] env: delete selected vars not present in imported env Marek Vasut
[U-Boot] [PATCH v2] mmc: mxsmmc: Fix operation with DMA Marek Vasut
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules Marek Vasut
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Marek Vasut
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Marek Vasut
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Marek Vasut
[U-Boot] [PATCH] bootm: fix usage of lmb_reserve() Marek Vasut
[U-Boot] [PATCH] MIPS: Add initial support for EMMA3SL/LP Marek Vasut
[U-Boot] [PATCH 2/3] MIPS: fix inconsistency in config option for cache operation mode Marek Vasut
[U-Boot] [PATCH] usb: increase delay after port reset Marek Vasut
[U-Boot] [PATCH 3/3] MIPS: fix endianess handling Marek Vasut
[U-Boot] [PATCH v9] usb: align buffers at cacheline Marek Vasut
[U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation Marek Vasut
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Marek Vasut
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Marek Vasut
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Marek Vasut
[U-Boot] [PATCH] usb: use noinline define Marek Vasut
[U-Boot] [PATCH] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Marek Vasut
[U-Boot] [PATCH] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Marek Vasut
[U-Boot] [PATCH V3] i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC Marek Vasut
[U-Boot] [PATCH] usb: use noinline define Marek Vasut
[U-Boot] [PATCH] usb: use noinline define Marek Vasut
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Marek Vasut
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Marek Vasut
[U-Boot] [PATCH] i.MX28: Enable SD DMA only if DCache enabled Marek Vasut
[U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r() Marek Vasut
[U-Boot] [PULL] u-boot-staging/marek.vasut at gmail.com :: FOR u-boot/master Marek Vasut
[U-Boot] [PULL] u-boot-usb/master :: FOR u-boot/-next Marek Vasut
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Marek Vasut
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Marek Vasut
[U-Boot] [PATCH 1/2] ARM926EJS: Make asm routines volatile in cache ops Marek Vasut
[U-Boot] [PATCH 2/2] ARM926EJS: Fix cache.c to comply with checkpatch.pl Marek Vasut
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board Marek Vasut
[U-Boot] [PATCH 0/2] i.MX28: DMA fixups Marek Vasut
[U-Boot] [PATCH 1/2] DMA: Split the APBH DMA init into block and channel init Marek Vasut
[U-Boot] [PATCH 2/2] M28: Pull out CONFIG_APBH_DMA so it's always enabled Marek Vasut
[U-Boot] [PATCH 0/4] USB: Fix EHCI to work with data cache enabled Marek Vasut
[U-Boot] [PATCH 1/4] USB: Align buffers at cacheline Marek Vasut
[U-Boot] [PATCH 2/4] USB: Drop ehci_alloc/ehci_free in ehci-hcd Marek Vasut
[U-Boot] [PATCH 3/4] USB: Drop cache flush bloat in EHCI-HCD Marek Vasut
[U-Boot] [PATCH 4/4] USB: Document the QH and qTD antics in EHCI-HCD Marek Vasut
[U-Boot] [PATCH 0/2] i.MX28: DMA fixups Marek Vasut
[U-Boot] [PATCH 0/4] USB: Fix EHCI to work with data cache enabled Marek Vasut
[U-Boot] [PULL] u-boot-usb/master :: FOR u-boot/-next Marek Vasut
[U-Boot] [PATCH 1/2 V2] DMA: Split the APBH DMA init into block and channel init Marek Vasut
[U-Boot] [PATCH 1/2 V3] DMA: Split the APBH DMA init into block and channel init Marek Vasut
[U-Boot] [PATCH 3/4 V2] USB: Drop cache flush bloat in EHCI-HCD Marek Vasut
[U-Boot] [PATCH 1/4 V2] USB: Align buffers at cacheline Marek Vasut
[U-Boot] [PATCH] i.MX28: Lower the amount of blocks transfered in one DMA cycle Marek Vasut
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Marek Vasut
[U-Boot] [PATCH 0/4] USB: Fix EHCI to work with data cache enabled Marek Vasut
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Marek Vasut
[U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation Marek Vasut
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Marek Vasut
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Marek Vasut
[U-Boot] [PATCH] i.MX28: Lower the amount of blocks transfered in one DMA cycle Marek Vasut
[U-Boot] [PATCH] FAT: Properly align buffers to allow cache operations Marek Vasut
[U-Boot] procedure to down load u-boot to RAM Marek Vasut
[U-Boot] [PATCH] sh: Fix rsk7264 pin setup for on-board ethernet Marek Vasut
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Marek Vasut
[U-Boot] [PATCH] usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file Marek Vasut
[U-Boot] [PATCH] mx6qsabresd: Add basic support Marek Vasut
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Marek Vasut
[U-Boot] [PATCH] usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file Marek Vasut
[U-Boot] [PATCH 1/4] usb:gadget:composite Composite framework - files from Linux kernel Marek Vasut
[U-Boot] [PATCH 3/4] usb:gadget: Wrapper for extracting usb_gadget from linux's device Marek Vasut
[U-Boot] [PATCH] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] [PATCH 1/6] usb:composite:g_dnl: Composite gadget (g_dnl) for USB downloading functions Marek Vasut
[U-Boot] [PATCH 2/6] usb:g_dnl:f_usbd_thor: USB Download function to support THOR protocol Marek Vasut
[U-Boot] [PATCH 3/6] usb:g_dnl:thor: THOR protocol back end support for f_usbd_thor function Marek Vasut
[U-Boot] [PATCH 4/6] usb:command: Support for USB Download command Marek Vasut
[U-Boot] Introducing myself Marek Vasut
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Marek Vasut
[U-Boot] Introducing myself Marek Vasut
[U-Boot] packet dropping problem in uboot Marek Vasut
[U-Boot] u-boot for sbc8641D ASMPmode Marek Vasut
[U-Boot] [PATCH] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Marek Vasut
[U-Boot] Pull request: u-boot-arm/master Marek Vasut
[U-Boot] [PATCH V3] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Marek Vasut
[U-Boot] [PATCH v2 1/3] usb:gadget:composite USB composite gadget support Marek Vasut
[U-Boot] [PATCH v2 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] MXS NAND: DMA read error Marek Vasut
[U-Boot] MXS NAND: DMA read error Marek Vasut
[U-Boot] MXS NAND: DMA read error Marek Vasut
[U-Boot] MXS NAND: DMA read error Marek Vasut
[U-Boot] [PATCH] mx28evk: add NAND support Marek Vasut
[U-Boot] [PATCH] mx28evk: add NAND support Marek Vasut
[U-Boot] [PATCH] i.MX28: Shut down the LCD controller before reset Marek Vasut
[U-Boot] [PATCH] mx28evk: add NAND support Marek Vasut
[U-Boot] [PATCH v3 1/3] usb:gadget:composite USB composite gadget support Marek Vasut
[U-Boot] [PATCH] mxs-i2c: Fix internal address byte order Marek Vasut
[U-Boot] [PATCH v2] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH] mmc: Fix warning if CONFIG_MMC_TRACE is enabled Marek Vasut
[U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock Marek Vasut
[U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock Marek Vasut
[U-Boot] [PULL] u-boot-staging/marex at denx.de :: FOR u-boot/-next Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] i2c driver for arm926ejs - at91sam9m10g45 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Marek Vasut
[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific Marek Vasut
[U-Boot] [PATCH 2/2 v4] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH 1/2] S3C2440 : PLL Initialization should be SoC specific Marek Vasut
[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout Marek Vasut
[U-Boot] [PATCH] spi: mxs: Allow other chip selects to work Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] Booting a dt zImage kernel Marek Vasut
[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440 Marek Vasut
[U-Boot] [PATCH] Add support s3c2440 NAND controller Marek Vasut
[U-Boot] [PATCH v2 1/2] spi: mxs: Introduce spi_cs_is_valid() Marek Vasut
[U-Boot] [PATCH v2 2/2] spi: mxs: Allow other chip selects to work Marek Vasut
[U-Boot] [STATUS] Are we ready for v2012.04.1 ?? Marek Vasut
[U-Boot] [PATCH v4 0/3] usb:gadget:composite: Support for composite gadget framework Marek Vasut
[U-Boot] [PATCH v4 1/3] usb:gadget:composite USB composite gadget support Marek Vasut
[U-Boot] [PATCH] Add support s3c2440 NAND controller Marek Vasut
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Marek Vasut
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Marek Vasut
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Marek Vasut
[U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back Marek Vasut
[U-Boot] [PATCH v2 04/11] cfb_console: Add function console_clear and console_clear_line Marek Vasut
[U-Boot] [PATCH v2 05/11] cfb_console: Add functions for moving with cursor Marek Vasut
[U-Boot] [PATCH v2 06/11] cfb_console: Add support for some ANSI terminal escape codes Marek Vasut
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Marek Vasut
[U-Boot] [PATCH 2/2] GCC47: Fix warning in md5.c Marek Vasut
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Marek Vasut
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Marek Vasut
[U-Boot] [PATCH 2/2] GCC47: Fix warning in md5.c Marek Vasut
[U-Boot] [PATCH v2 05/11] cfb_console: Add functions for moving with cursor Marek Vasut
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Marek Vasut
[U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900 Marek Vasut
[U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c Marek Vasut
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Marek Vasut
[U-Boot] [PATCH 1/2] GCC47: Fix warning in cmd_nand.c Marek Vasut
[U-Boot] [PATCH v4 1/3] usb:gadget:composite USB composite gadget support Marek Vasut
[U-Boot] [PATCH v4 2/3] usb:gadget:composite: Support for composite at gadget.h Marek Vasut
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] [PATCH 0/2] Add support for MINI2440 (s3c2440) Marek Vasut
[U-Boot] [PATCH 1/2] Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 2/2 v5] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH 2/5] x86: Forward declate gd_t Marek Vasut
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Marek Vasut
[U-Boot] [PATCH V3] i.MX6: mx6q_sabrelite: add SATA bindings Marek Vasut
[U-Boot] [PATCH 1/2] Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 1/2 v2] Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 2/2 v6] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH v4 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] [PATCH 1/2 v3] Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 2/2 v7] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH 2/2 v7] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH 1/2 v3] Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 2/2 v8] Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH 1/2 v4] ARM : Add GPIO Driver and IOMUX definition for S3C2440 Marek Vasut
[U-Boot] [PATCH 2/2 v9] ARM : Add support for MINI2440 (s3c2440). Marek Vasut
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Marek Vasut
[U-Boot] [PATCH v4 RESEND 3/3] usb:udc:samsung Add functions for storing private gadget data in UDC driver Marek Vasut
[U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM Marek Vasut
[U-Boot] imx53 - nandflash support ? Vellemans, Noel
[U-Boot] [PATCH V2 12/24] SPEAr: Enable usb device high speed support Amit Virdi
[U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation Amit Virdi
[U-Boot] [PATCH V2 3/8] net/designware: Phy address fix Amit Virdi
[U-Boot] [PATCH V2] USB:gadget:designware USB OTG implementation Amit Virdi
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: Prafulla Wadaskar
[U-Boot] Marvell/Kirkwood: 6192 vs. 6281 - does U-Boot correctly distinguish between the two? Prafulla Wadaskar
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: Prafulla Wadaskar
[U-Boot] [PATCH 0/5 v3] Kirkwood: add lschlv2 and lsxhl board support Prafulla Wadaskar
[U-Boot] [PATCH 2/5] net: add helper to generate random mac address Prafulla Wadaskar
[U-Boot] [PATCH 3/5] net: add eth_setenv_enetaddr_by_index() Prafulla Wadaskar
[U-Boot] [PATCH v2] lsxl: add support for lschlv2 and lsxhl Prafulla Wadaskar
[U-Boot] [PATCH v2] mvgbe: remove warning for unused methods Prafulla Wadaskar
[U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release Prafulla Wadaskar
[U-Boot] Problem w/ SATA/IDE on Kirkwood _88F6281_ board: Prafulla Wadaskar
[U-Boot] [PATCH v2] spi/kirkwood: add weak functions board_spi_bus_claim/release Prafulla Wadaskar
[U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02 Prafulla Wadaskar
[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support Prafulla Wadaskar
[U-Boot] [PATCH] fix IDE_BUS(dev) macro Prafulla Wadaskar
[U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support Prafulla Wadaskar
[U-Boot] Pull request for u-boot-marvell.git Prafulla Wadaskar
[U-Boot] [PATCH v5] kirkwood: add support for Cloud Engines Pogoplug E02 Prafulla Wadaskar
[U-Boot] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Prafulla Wadaskar
[U-Boot] [PATCH] kwboot: Boot Marvell Kirkwood SoCs over a serial link. Prafulla Wadaskar
[U-Boot] [PATCH] kirkwood: add support for D-Link DNS-320 Prafulla Wadaskar
[U-Boot] [PATCH v2] mkenvimage: Fix compiler warning David Wagner
[U-Boot] [PATCH 2/5] net: add helper to generate random mac address Michael Walle
[U-Boot] [PATCH v3 04/23] i2c: Add TPS6586X driver Stephen Warren
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Stephen Warren
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Stephen Warren
[U-Boot] [PATCH v3 10/23] tegra: Add tegra_get_chip_type() to detect SKU Stephen Warren
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Stephen Warren
[U-Boot] [PATCH v4 22/23] tegra: fdt: Add EMC data for Tegra2 Seaboard Stephen Warren
[U-Boot] [PATCH v3 15/23] tegra: Add warmboot implementation Stephen Warren
[U-Boot] [PATCH v3 0/23] tegra: warmboot (suspend / resume) support Stephen Warren
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Stephen Warren
[U-Boot] [PATCH v3 04/23] i2c: Add TPS6586X driver Stephen Warren
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Stephen Warren
[U-Boot] [PATCH v3 0/23] tegra: warmboot (suspend / resume) support Stephen Warren
[U-Boot] [PATCH v4 19/23] tegra: Add EMC settings for Seaboard Stephen Warren
[U-Boot] Regression due to: arm: Add Prep subcommand support to bootm Stephen Warren
[U-Boot] Regression due to: arm: Add Prep subcommand support to bootm Stephen Warren
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Stephen Warren
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Stephen Warren
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Stephen Warren
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Stephen Warren
[U-Boot] [PATCH 2/2] arm: restore fdt_fixup_ethernet call to do_bootm_linux Stephen Warren
[U-Boot] [PATCH] fdt: fix out of tree builds with DT support Stephen Warren
[U-Boot] [PATCH V2 1/2] arm: fix bootm with device tree Stephen Warren
[U-Boot] [PATCH V2 2/2] arm: restore fdt_fixup_ethernet call to do_bootm_linux Stephen Warren
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Stephen Warren
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Stephen Warren
[U-Boot] Booting a dt zImage kernel Stephen Warren
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Stephen Warren
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Stephen Warren
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Stephen Warren
[U-Boot] [STATUS] v2012.04 released, Merge Window is OPEN Stephen Warren
[U-Boot] [PATCH v4 05/10] tegra: Add keyboard support to funcmux Stephen Warren
[U-Boot] [PATCH v4 06/10] tegra: fdt: Add keyboard controller definition Stephen Warren
[U-Boot] [PATCH v4 07/10] tegra: fdt: Add keyboard definitions for Seaboard Stephen Warren
[U-Boot] [PATCH v4 08/10] tegra: Add tegra keyboard driver Stephen Warren
[U-Boot] [PATCH v4 09/10] tegra: Switch on console mux and use environment for console Stephen Warren
[U-Boot] [PATCH v4 10/10] tegra: Enable keyboard for Seaboard Stephen Warren
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Stephen Warren
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Stephen Warren
[U-Boot] [PATCH v3 0/7] tegra: Add NAND flash support Stephen Warren
[U-Boot] [PATCH v8] usb: align buffers at cacheline Tom Warren
[U-Boot] [PATCH v8] usb: align buffers at cacheline Tom Warren
[U-Boot] [PATCH v3 06/23] tegra: Move ap20.h header into arch location Tom Warren
[U-Boot] [PATCH v3 0/23] tegra: warmboot (suspend / resume) support Tom Warren
[U-Boot] U-Boot Digest, Vol 47, Issue 24 Tom Warren
[U-Boot] [PATCH V2 1/2] arm: fix bootm with device tree Tom Warren
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Warren
[U-Boot] [PATCH 1/2] arm: fix bootm with device tree Tom Warren
[U-Boot] [PATCH] arm: Tegra2: Add a useful default boot env Tom Warren
[U-Boot] [PATCH V2] arm: Tegra2: Add a useful default boot env Tom Warren
[U-Boot] pull request for u-boot-tegra/master Tom Warren
[U-Boot] [PATCH] UBIFS: Improve error message when reading superblock failed Thomas Weber
[U-Boot] [PATCH 1/2] tricorder: Add UBIFS Thomas Weber
[U-Boot] [PATCH 2/2] tricorder: Load kernel from ubifs Thomas Weber
[U-Boot] Sandbox question Matthias Weisser
[U-Boot] Sandbox question Matthias Weisser
[U-Boot] Sandbox question Matthias Weißer
[U-Boot] [PATCH 0/6] add zip command support for uboot Lei Wen
[U-Boot] [PATCH 0/6] add zip command support for uboot Lei Wen
[U-Boot] [PATCH 0/6] add zip command support for uboot Lei Wen
[U-Boot] [PATCH 0/6] add zip command support for uboot Lei Wen
[U-Boot] [PATCH v4 0/4] mmc: support sdhci instead of s5p_mmc Lei Wen
[U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev() Lei Wen
[U-Boot] [RESEND 1/2] mmc:fix: Set mmc width according to MMC host capabilities Lei Wen
[U-Boot] [RESEND 2/2] mmc:fix Call mmc_init() when executing mmc_get_dev() Lei Wen
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules Scott Wood
[U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC Scott Wood
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Scott Wood
[U-Boot] [PATCH 8/9] imx: nand: Don't invent new configuration variable Scott Wood
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Scott Wood
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Scott Wood
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Scott Wood
[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v2 1/7] nand: Try to align the default buffers Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH 4/9] imx: nand: Place BBT patterns into free OOB region Scott Wood
[U-Boot] Status of fsl_elbc_nand driver and 4k page NAND / 4bit ECC Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v2 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions Scott Wood
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Scott Wood
[U-Boot] [PATCH 4/9] imx: nand: Support flash based BBT Scott Wood
[U-Boot] fatls/fatload for NAND (partition) Scott Wood
[U-Boot] [PATCH V4 4/8] imx: nand: Support flash based BBT Scott Wood
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Scott Wood
[U-Boot] [PATCH 3/4][v3] powerpc/85xx:Make debug exception vector accessible Scott Wood
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Scott Wood
[U-Boot] [PATCH 2/4][v2] powerpc/85xx:Fix MSR[DE] bit in MSR to support debugger Scott Wood
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Scott Wood
[U-Boot] [PATCH] Add support s3c2440 NAND controller Scott Wood
[U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver Scott Wood
[U-Boot] A problem about using the nand command Scott Wood
[U-Boot] Can't read kernel if bad blocks are present in partition Scott Wood
[U-Boot] [PATCH] PowerPC: Change -fpic flag to -fPIC flag in the config.mk Scott Wood
[U-Boot] Can't read kernel if bad blocks are present in partition Scott Wood
[U-Boot] Can't read kernel if bad blocks are present in partition Scott Wood
[U-Boot] [PATCH][SDK1.2] powerpc/p1010rdb: add readme document for p1010rdb Scott Wood
[U-Boot] [PATCH] usb: increase delay after port reset Ilya Yanok
[U-Boot] [PATCH 0/3 v4] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
[U-Boot] [PATCH 1/3 v9] arm926ejs: add NXP LPC32x0 cpu series support Vladimir Zapolskiy
[U-Boot] [PATCH 2/3 v3] serial: add LPC32X0 high-speed UART devices support Vladimir Zapolskiy
[U-Boot] [PATCH 3/3 v6] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
[U-Boot] [PATCH 0/3 v4] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
[U-Boot] [RFC][PATCH] INIT_FUNC - List madness Detlev Zundel
[U-Boot] [PATCH 4/8] i.MX25: Has a GPIO4 too Detlev Zundel
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules stefano babic
[U-Boot] [PATCH] Correct corrupted NAND Flash access on KARO TX25 modules stefano babic
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules stefano babic
[U-Boot] [PATCH v2] Correct corrupted NAND Flash access on KARO TX25 modules stefano babic
[U-Boot] [PATCH 1/3] imx: Add GPIO_TO_PORT macro stefano babic
[U-Boot] [PATCH] mx6qsabresd: Add basic support stefano babic
[U-Boot] [PATCH] mx6qsabresd: Add basic support stefano babic
[U-Boot] [PATCH 05/08] omap3: Introduce weak misc_init_r stefano babic
[U-Boot] [PATCH] mx6qsabresd: Add basic support stefano babic
[U-Boot] [PATCH] mx6qsabresd: Add basic support stefano babic
[U-Boot] [PATCH] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow stefano babic
[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board esw at bus-elektronik.de
[U-Boot] some questions about u-boot li guohu
[U-Boot] A problem about using the nand command li guohu
[U-Boot] [PATCH] eb_cpux9k2: fix chip select y at jenslinux.site
[U-Boot] [PATCH v3 13/23] tegra: Add PMU to manage power supplies jimmzhang
[U-Boot] [PATCH v3 12/23] tegra: Add EMC support for optimal memory timings jimmzhang
[U-Boot] [PATCH v5 19/23] tegra: Add EMC settings for Seaboard jimmzhang
[U-Boot] (no subject) mohamed.haneef at lntinfotech.com
[U-Boot] msm7630 mainline request mohamed.haneef at lntinfotech.com
[U-Boot] fatls/fatload for NAND (partition) peterlu
[U-Boot] procedure to down load u-boot to RAM apple pie
[U-Boot] [PATCH v8] usb: align buffers at cacheline puneets
[U-Boot] [PATCH v9] usb: align buffers at cacheline puneets
[U-Boot] [PATCH 0/4] USB: Fix EHCI to work with data cache enabled puneets
[U-Boot] prob with i2c in u boot saketha rama
[U-Boot] Pull request: u-boot-nios/master thomas
[U-Boot] please add me to email list wchfuestc
[U-Boot] "make menuconfig" does not work hong zhang
[U-Boot] U-Boot on Cortex R4 Johan Östensson
[U-Boot] Can anyone help me to solve the stack problem of U-boot? Urgent~ 吳志峰
[U-Boot] Can anyone help me to solve the stack problem of U-boot? Urgent~ 吳志峰

Last message date: Mon Apr 30 23:08:08 CEST 2012
Archived on: Sun May 18 15:55:48 CEST 2014

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).