[U-Boot] [PATCH v7] kirkwood: add NAS62x0 board support

[David Purdy]

On Tue, Apr 17, 2012 at 1:47 PM, Luka Perkov <uboot at lukaperkov.net> wrote:
> Hi Simon! Hi Prafulla!
>
> On Tue, Apr 17, 2012 at 02:14:23AM -0700, Prafulla Wadaskar wrote:
>> > #define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE /
>> > CONFIG_SYS_IDE_MAXBUS))
>> >
>> > in ide.h fixes the problem for me and detects both the internal hard
>> > disk and the hard disk at the eSATA port.
>
> Yes, this does the trick.
>
>> > This also means that the 6210/6220 patch should not make a difference
>> > between the two boards.
>
> You are right. I'll rewrite it.
>
>> Hi Simon
>>
>> This is a good findings indeed.
>
> I agree :)
>
>> Hi Luka
>> May you please check the same and resubmit the clean patch, you may keep ide patch separate mentioning dependency.
>
> Yes. I'll send patches soonish...
>
> Luka
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


Simon, Luka, Prafulla,

Any chance this same patch would similarly help other Kirkwood boxes
that have two SATA ports?

regards,

Dave