[U-Boot] [PATCH v2 2/6] powerpc/ppc4xx: Make gdsys 405ep boards reset more generic
Dirk Eibach
eibach at gdsys.de
Thu Apr 26 15:54:22 CEST 2012
In order to add boards that have different hardware for fpga reset,
any 405ep gdsys board now provides these functions:
void gd405ep_init(void);
void gd405ep_set_fpga_reset(unsigned state);
void gd405ep_setup_hw(void);
int gd405ep_get_fpga_done(unsigned fpga);
Signed-off-by: Dirk Eibach <eibach at gdsys.de>
Cc: Stefan Roese <sr at denx.de>
---
Changes in v2:
- add Cc
- split up original patch series
board/gdsys/405ep/405ep.c | 42 +++++------
board/gdsys/405ep/405ep.h | 10 +++
board/gdsys/405ep/Makefile | 1 +
board/gdsys/405ep/dlvision-10g.c | 36 ++++++++-
board/gdsys/405ep/io.c | 34 ++++++++
board/gdsys/405ep/iocon.c | 34 ++++++++
board/gdsys/405ep/neo.c | 161 ++++++++++++++++++++++++++++++++++++++
board/gdsys/neo/Makefile | 45 -----------
board/gdsys/neo/neo.c | 102 ------------------------
boards.cfg | 2 +-
include/configs/dlvision-10g.h | 3 +-
include/configs/io.h | 5 +-
include/configs/iocon.h | 3 +-
include/configs/neo.h | 94 +++++++++++++----------
include/gdsys_fpga.h | 11 +++
15 files changed, 366 insertions(+), 217 deletions(-)
create mode 100644 board/gdsys/405ep/405ep.h
create mode 100644 board/gdsys/405ep/neo.c
delete mode 100644 board/gdsys/neo/Makefile
delete mode 100644 board/gdsys/neo/neo.c
diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
index 8b80533..bea671e 100644
--- a/board/gdsys/405ep/405ep.c
+++ b/board/gdsys/405ep/405ep.c
@@ -28,12 +28,9 @@
#include <asm/ppc4xx-gpio.h>
#include <asm/global_data.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-
#define REFLECTION_TESTPATTERN 0xdede
#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
@@ -55,7 +52,6 @@ void print_fpga_state(unsigned dev)
int board_early_init_f(void)
{
unsigned k;
- unsigned ctr;
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
gd->fpga_state[k] = 0;
@@ -73,26 +69,29 @@ int board_early_init_f(void)
* -> ca. 15 us
*/
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
+ return 0;
+}
- /*
- * setup io-latches for reset
- */
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+int board_early_init_r(void)
+{
+ unsigned k;
+ unsigned ctr;
- /*
- * set "startup-finished"-gpios
- */
- gpio_write_bit(21, 0);
- gpio_write_bit(22, 1);
+ for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
+ gd->fpga_state[k] = 0;
/*
- * wait for fpga-done
+ * reset FPGA
*/
+ gd405ep_init();
+
+ gd405ep_set_fpga_reset(1);
+
+ gd405ep_setup_hw();
+
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
ctr = 0;
- while (!(in_le16((void *)LATCH2_BASE)
- & CONFIG_SYS_FPGA_DONE(k))) {
+ while (!gd405ep_get_fpga_done(k)) {
udelay(100000);
if (ctr++ > 5) {
gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
@@ -101,12 +100,9 @@ int board_early_init_f(void)
}
}
- /*
- * setup io-latches for boot (stop reset)
- */
udelay(10);
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+
+ gd405ep_set_fpga_reset(0);
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) {
ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k);
diff --git a/board/gdsys/405ep/405ep.h b/board/gdsys/405ep/405ep.h
new file mode 100644
index 0000000..5647dbc
--- /dev/null
+++ b/board/gdsys/405ep/405ep.h
@@ -0,0 +1,10 @@
+#ifndef __405EP_H_
+#define __405EP_H_
+
+/* functions to be provided by board implementation */
+void gd405ep_init(void);
+void gd405ep_set_fpga_reset(unsigned state);
+void gd405ep_setup_hw(void);
+int gd405ep_get_fpga_done(unsigned fpga);
+
+#endif /* __405EP_H_ */
diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
index feb5cec..38e5ea4 100644
--- a/board/gdsys/405ep/Makefile
+++ b/board/gdsys/405ep/Makefile
@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+COBJS-$(CONFIG_NEO) += neo.o
COBJS-$(CONFIG_IO) += io.o
COBJS-$(CONFIG_IOCON) += iocon.o
COBJS-$(CONFIG_DLVISION_10G) += dlvision-10g.o
diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c
index f55afbd..adaffb2 100644
--- a/board/gdsys/405ep/dlvision-10g.c
+++ b/board/gdsys/405ep/dlvision-10g.c
@@ -27,15 +27,18 @@
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
#include "../common/osd.h"
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH2_MC2_PRESENT_N 0x0080
-
#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
+#define LATCH2_MC2_PRESENT_N 0x0080
+
enum {
UNITTYPE_VIDEO_USER = 0,
UNITTYPE_MAIN_USER = 1,
@@ -261,3 +264,32 @@ int last_stage_init(void)
return 0;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c
index db1ea7f..ac4cefd 100644
--- a/board/gdsys/405ep/io.c
+++ b/board/gdsys/405ep/io.c
@@ -29,8 +29,13 @@
#include <miiphy.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
#define PHYREG_CONTROL 0
#define PHYREG_PAGE_ADDRESS 22
#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
@@ -175,3 +180,32 @@ int last_stage_init(void)
return 0;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c
index ce53340..ed27791 100644
--- a/board/gdsys/405ep/iocon.c
+++ b/board/gdsys/405ep/iocon.c
@@ -27,10 +27,15 @@
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
+#include "405ep.h"
#include <gdsys_fpga.h>
#include "../common/osd.h"
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
enum {
UNITTYPE_MAIN_SERVER = 0,
UNITTYPE_MAIN_USER = 1,
@@ -231,3 +236,32 @@ int fpga_gpio_get(int pin)
{
return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin;
}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}
diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c
new file mode 100644
index 0000000..f38edd2
--- /dev/null
+++ b/board/gdsys/405ep/neo.c
@@ -0,0 +1,161 @@
+/*
+ * (C) Copyright 2011
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach at gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+#include <dtt.h>
+
+#include "405ep.h"
+#include <gdsys_fpga.h>
+
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
+enum {
+ UNITTYPE_CCX16 = 1,
+ UNITTYPE_CCIP216 = 2,
+};
+
+enum {
+ HWVER_300 = 3,
+};
+
+int misc_init_r(void)
+{
+ /* startup fans */
+ dtt_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: CATCenter Neo");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+static void print_fpga_info(void)
+{
+ ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0);
+ u16 versions = in_le16(&fpga->versions);
+ u16 fpga_version = in_le16(&fpga->fpga_version);
+ u16 fpga_features = in_le16(&fpga->fpga_features);
+ int fpga_state = get_fpga_state(0);
+ unsigned unit_type;
+ unsigned hardware_version;
+ unsigned feature_channels;
+
+ puts("FPGA: ");
+ if (fpga_state & FPGA_STATE_DONE_FAILED) {
+ printf(" done timed out\n");
+ return;
+ }
+
+ if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
+ printf(" refelectione test failed\n");
+ return;
+ }
+
+ unit_type = (versions & 0xf000) >> 12;
+ hardware_version = versions & 0x000f;
+ feature_channels = fpga_features & 0x007f;
+
+ switch (unit_type) {
+ case UNITTYPE_CCX16:
+ printf("CCX-Switch");
+ break;
+
+ default:
+ printf("UnitType %d(not supported)", unit_type);
+ break;
+ }
+
+ switch (hardware_version) {
+ case HWVER_300:
+ printf(" HW-Ver 3.00-3.12\n");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported)\n",
+ hardware_version);
+ break;
+ }
+
+ printf(" FPGA V %d.%02d, features:",
+ fpga_version / 100, fpga_version % 100);
+
+ printf(" %d channel(s)\n", feature_channels);
+}
+
+int last_stage_init(void)
+{
+ print_fpga_info();
+
+ return 0;
+}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+ if (state) {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+ } else {
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+ }
+}
+
+void gd405ep_setup_hw(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+ /*
+ * Neo hardware has no FPGA-DONE GPIO
+ */
+ return 1;
+}
diff --git a/board/gdsys/neo/Makefile b/board/gdsys/neo/Makefile
deleted file mode 100644
index dc5b5b8..0000000
--- a/board/gdsys/neo/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o
-SOBJS =
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c
deleted file mode 100644
index d21d599..0000000
--- a/board/gdsys/neo/neo.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach at gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define HWTYPE_CCX16 1
-#define HWREV_300 3
-
-int board_early_init_f(void)
-{
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
- mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
- mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks
- * -> ca. 15 us
- */
- mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
-
- return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
- u16 val = in_le16((void *)CONFIG_FPGA_BASE + 2);
- u8 unit_type;
- u8 hardware_cpu_ports;
- u8 hardware_con_ports;
- u8 hardware_version;
-
- printf("Board: CATCenter Neo");
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- puts("\n ");
-
- unit_type = (val & 0xf000) >> 12;
- hardware_cpu_ports = ((val & 0x0f00) >> 8) * 8;
- hardware_con_ports = ((val & 0x00f0) >> 4) * 2;
- hardware_version = val & 0x000f;
-
- switch (unit_type) {
- case HWTYPE_CCX16:
- printf("CCX16-FPGA (80 UARTs)");
- break;
-
- default:
- printf("UnitType %d, unsupported", unit_type);
- break;
- }
-
- printf(", %d cpu ports, %d console ports,",
- hardware_cpu_ports, hardware_con_ports);
-
- switch (hardware_version) {
- case HWREV_300:
- printf(" HW-Ver 3.00\n");
- break;
-
- default:
- printf(" HW-Ver %d, unsupported\n",
- hardware_version);
- break;
- }
-
- return 0;
-}
diff --git a/boards.cfg b/boards.cfg
index 3cf75c3..24c5879 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -982,7 +982,7 @@ intip powerpc ppc4xx intip gdsys
io powerpc ppc4xx 405ep gdsys
io64 powerpc ppc4xx 405ex gdsys
iocon powerpc ppc4xx 405ep gdsys
-neo powerpc ppc4xx - gdsys
+neo powerpc ppc4xx 405ep gdsys
icon powerpc ppc4xx - mosaixtech
MIP405 powerpc ppc4xx mip405 mpl
MIP405T powerpc ppc4xx mip405 mpl - MIP405:MIP405T
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 1468197..cd64e3a 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -37,7 +37,8 @@
#define CONFIG_IDENT_STRING " dlvision-10g 0.02"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
diff --git a/include/configs/io.h b/include/configs/io.h
index 9d2a87d..fe07ca5 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -37,8 +37,9 @@
#define CONFIG_IDENT_STRING " io 0.04"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
-#define CONFIG_LAST_STAGE_INIT /* call last_stage_init */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 9fcc643..bbf79e7 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -37,7 +37,8 @@
#define CONFIG_IDENT_STRING " iocon 0.03"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
diff --git a/include/configs/neo.h b/include/configs/neo.h
index 6559353..38b5bec 100644
--- a/include/configs/neo.h
+++ b/include/configs/neo.h
@@ -35,9 +35,13 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME neo
+#define CONFIG_IDENT_STRING " neo 0.01"
#include "amcc-common.h"
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
@@ -149,53 +153,53 @@
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR 0xFFF00000
#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND 0xFFF20000
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#endif
/*
* PPC405 GPIO Configuration
*/
-#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
-{ \
-/* GPIO Core 0 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
-{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
-{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
-{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
-} \
+#define CONFIG_SYS_4xx_GPIO_TABLE { \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
+} \
}
/*
@@ -226,12 +230,22 @@
#define CONFIG_SYS_EBC_PB1CR 0xFB85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */
/* Memory Bank 2 (FPGA) initialization */
-#define CONFIG_FPGA_BASE 0x7f100000
+#define CONFIG_SYS_FPGA0_BASE 0x7f100000
#define CONFIG_SYS_EBC_PB2AP 0x92015480
#define CONFIG_SYS_EBC_PB2CR 0x7f11a000 /* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE
+
+#define CONFIG_SYS_FPGA_COUNT 1
+
/* Memory Bank 3 (Latches) initialization */
+#define CONFIG_SYS_LATCH_BASE 0x7f200000
#define CONFIG_SYS_EBC_PB3AP 0x92015480
#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_LATCH0_RESET 0xffff
+#define CONFIG_SYS_LATCH0_BOOT 0xffff
+#define CONFIG_SYS_LATCH1_RESET 0xffbf
+#define CONFIG_SYS_LATCH1_BOOT 0xffff
+
#endif /* __CONFIG_H */
diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h
index 949864c..555fbe2 100644
--- a/include/gdsys_fpga.h
+++ b/include/gdsys_fpga.h
@@ -58,6 +58,17 @@ typedef struct ihs_osd {
u16 y_pos;
} ihs_osd_t;
+#ifdef CONFIG_NEO
+typedef struct ihs_fpga {
+ u16 reflection_low; /* 0x0000 */
+ u16 versions; /* 0x0002 */
+ u16 fpga_features; /* 0x0004 */
+ u16 fpga_version; /* 0x0006 */
+ u16 reserved_0[8187]; /* 0x0008 */
+ u16 reflection_high; /* 0x3ffe */
+} ihs_fpga_t;
+#endif
+
#ifdef CONFIG_IO
typedef struct ihs_fpga {
u16 reflection_low; /* 0x0000 */
--
1.7.2.5
More information about the U-Boot
mailing list