[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk()

[Dirk Behme]

Hi Stefano,

On 29.04.2012 16:54, Fabio Estevam wrote:
> Hi Dirk,
>
> On Thu, Apr 26, 2012 at 3:04 AM, Dirk Behme<dirk.behme at de.bosch.com>  wrote:
>
>> We had this patch on a v2012.04.1 based test branch and it showed some
>> strange issues with SD cards on i.MX6.
>>
>> Depending on the SD card used (different ones) and the board (SabreLite and
>> a custom one)
>>
>> - the SD card just works fine as we are used to
>> - booting fails with "MMC init failed"
>> - booting fails with "Card did not respond to voltage select!"
>>
>> Reverting this patch on the test branch makes all tested boards and tested
>> SD cards work fine again.
>>
>> I haven't looked into the details to debug the root cause, though.
>>
>> So for the moment: NACK
>
> Thanks for testing it. I found one mistake and will submit a fix shortly.

I saw you have this patch already in

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=shortlog;h=refs/heads/master

Do you mind to remove this?

Best regards

Dirk