[U-Boot] [PATCH 2/5] imx-common: Factor out get_ahb_clk()
Stefano Babic
sbabic at denx.de
Sun Apr 29 18:46:43 CEST 2012
On 29/04/2012 18:43, Dirk Behme wrote:
> Hi Stefano,
>
> On 29.04.2012 16:54, Fabio Estevam wrote:
>> Hi Dirk,
>>
>> On Thu, Apr 26, 2012 at 3:04 AM, Dirk Behme<dirk.behme at de.bosch.com>
>> wrote:
>>
>>> We had this patch on a v2012.04.1 based test branch and it showed some
>>> strange issues with SD cards on i.MX6.
>>>
>>> Depending on the SD card used (different ones) and the board
>>> (SabreLite and
>>> a custom one)
>>>
>>> - the SD card just works fine as we are used to
>>> - booting fails with "MMC init failed"
>>> - booting fails with "Card did not respond to voltage select!"
>>>
>>> Reverting this patch on the test branch makes all tested boards and
>>> tested
>>> SD cards work fine again.
>>>
>>> I haven't looked into the details to debug the root cause, though.
>>>
>>> So for the moment: NACK
>>
>> Thanks for testing it. I found one mistake and will submit a fix shortly.
>
> I saw you have this patch already in
>
> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=shortlog;h=refs/heads/maste
Hi Dirk,
thanks for raise my attention on this issue. I drop the patch from
u-boot-imx
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list