[U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h

Stefano Babic sbabic at denx.de
Thu Apr 19 18:17:23 CEST 2012


On 19/04/2012 10:55, Timo Ketola wrote:
> types.h must be included in imx-regs.h if one wants to include
> imx-regs.h in a board configuration file. That for one's part is
> necessary, if one wants to use addresses defined in imx-regs.h.
> 
> For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and
> a proper thing is to define it with IMX_MMC_SDHCx_BASE in board
> configuration file. This patch fixes the build in that case.
> 
> Signed-off-by: Timo Ketola <timo at exertus.fi>
> ---
> 
> Changes in v4:
> - Proper fix was found so this patch changes altogether - subject,
>     message and touched file
> 
> Changes in v2:
> - New patch in this series
> 
>  arch/arm/include/asm/arch-mx25/imx-regs.h |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
> index 7f9449b..cf925d7 100644
> --- a/arch/arm/include/asm/arch-mx25/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
> @@ -34,6 +34,9 @@
>  #define _IMX_REGS_H
>  
>  #ifndef __ASSEMBLY__
> +
> +#include <asm/types.h>
> +
>  #ifdef CONFIG_FEC_MXC
>  extern void mx25_fec_init_pins(void);
>  #endif

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list