[U-Boot] [PATCH V4 7/8] i.MX2: Include asm/types.h in arch-mx25/imx-regs.h

[Timo Ketola]

types.h must be included in imx-regs.h if one wants to include
imx-regs.h in a board configuration file. That for one's part is
necessary, if one wants to use addresses defined in imx-regs.h.

For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and
a proper thing is to define it with IMX_MMC_SDHCx_BASE in board
configuration file. This patch fixes the build in that case.

Signed-off-by: Timo Ketola <timo at exertus.fi>
---

Changes in v4:
- Proper fix was found so this patch changes altogether - subject,
    message and touched file

Changes in v2:
- New patch in this series

 arch/arm/include/asm/arch-mx25/imx-regs.h |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 7f9449b..cf925d7 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -34,6 +34,9 @@
 #define _IMX_REGS_H
 
 #ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
 #ifdef CONFIG_FEC_MXC
 extern void mx25_fec_init_pins(void);
 #endif
-- 
1.7.5.4