[U-Boot] [PATCH] i.MX6: arm2: Add AXI cache and Qos setting

[Stefano Babic]

On 13/04/2012 09:10, Liu Hui-R64343 wrote:
>> -----Original Message-----
>> From: Dirk Behme [mailto:dirk.behme at de.bosch.com]
>> Sent: Friday, April 13, 2012 2:46 PM
>> To: u-boot at lists.denx.de
>> Cc: Dirk Behme; Jason Chen; Liu Hui-R64343; Stefano Babic; Fabio Estevam
>> Subject: [PATCH] i.MX6: arm2: Add AXI cache and Qos setting
>>
>> Do the same AXI cache and Qos settings done already in the SabreLite
>> imximage.cfg for the ARM2 board, too.
>>
>> It fixes a display flash issue caused by low priority of the display IDMA
>> channel.
>>
>> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
>> CC: Jason Chen <b02280 at freescale.com>
>> CC: Jason Liu <r64343 at freescale.com>
>> CC: Stefano Babic <sbabic at denx.de>
>> CC: Fabio Estevam <festevam at gmail.com>
>> ---
>> board/freescale/mx6qarm2/imximage.cfg |    6 ++++++
>> 1 files changed, 6 insertions(+), 0 deletions(-)
>>
>> diff --git a/board/freescale/mx6qarm2/imximage.cfg
>> b/board/freescale/mx6qarm2/imximage.cfg
>> index 5f0ee0d..ceecbf9 100644
>> --- a/board/freescale/mx6qarm2/imximage.cfg
>> +++ b/board/freescale/mx6qarm2/imximage.cfg
>> @@ -165,3 +165,9 @@ DATA 4 0x020c4074 0x3FF00000  DATA 4 0x020c4078
>> 0x00FFF300  DATA 4 0x020c407c 0x0F0000C3  DATA 4 0x020c4080 0x000003FF
>> +
>> +# enable AXI cache for VDOA/VPU/IPU
>> +DATA 4 0x020e0010 0xF00000FF
>> +# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 DATA 4 0x020e0018
>> +0x007F007F DATA 4 0x020e001c 0x007F007F
> 
> Acked-by: Jason Liu <r64343 at freescale.com>
> 

Thanks all - this is a fix, I will try to push it for the release.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================