[U-Boot] [PATCH 3/4][v4] powerpc/85xx:Make debug exception vector accessible

Prabhakar Kushwaha prabhakar at freescale.com
Wed Apr 25 10:25:56 CEST 2012


Debugging of e500 and e500v1 processer requires debug exception vecter (IVPR +
IVOR15) to have valid and fetchable OP code.

While executing in translated space (AS=1), whenever a debug exception is
generated, the MSR[DS/IS] gets cleared i.e. AS=0 and the processor tries to
fetch an instruction from the debug exception vector (IVPR + IVOR15); since now
we are in AS=0, the application needs to ensure the proper TLB configuration to
have (IVOR + IVOR15) accessible from AS=0 also.

Create a temporary TLB in AS0 to make sure debug exception verctor is
accessible on debug exception.

Signed-off-by: Radu Lazarescu <radu.lazarescu at freescale.com>
Signed-off-by: Marius Grigoras <marius.grigoras at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
  Based upon git://git.denx.de/u-boot.git branch master

 Changes for v2: 
	- Put Temporary TLB creation under #define

 Changes for v3: 
	- Removed unnecessary CONFIG_E500
	- Updated CONFG_SYS_RAMBOOT mas2 properties
	- Added secure boot Debug TLB.
	- Avoid temp TLB creation for NAND SPL
	- removed unnecessary mas7 updation

  Changes for v4: Incorporated Andy Fleming's comments
	- Removed temporary TLB #define for P1010. 
      Please note a separte patch will be send for the same
	

  Tested on
  - SoC having E500 Family processor (P1010RDB, BSC9131RDB)
  - SoC having E500MC Family processor (P4080DS, P3041DS)


 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |   32 +++++++++++++-
 arch/powerpc/cpu/mpc85xx/start.S          |   66 +++++++++++++++++++++++++++++
 2 files changed, 97 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 091af7c..dacfdd1 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2011 Freescale Semiconductor, Inc
+ * Copyright 2009-2012 Freescale Semiconductor, Inc
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -53,6 +53,36 @@ void setup_ifc(void)
 
 	asm volatile("isync;msync;tlbwe;isync");
 
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB)
+/*
+ * TLB entry for debuggging in AS1
+ * Create temporary TLB entry in AS0 to handle debug exception
+ * As on debug exception MSR is cleared i.e. Address space is changed
+ * to 0. A TLB entry (in AS0) is required to handle debug exception generated
+ * in AS1.
+ *
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * bacause flash's physical address is going to change as
+ * CONFIG_SYS_FLASH_BASE_PHYS.
+ */
+	_mas0 = MAS0_TLBSEL(1) |
+			MAS0_ESEL(CONFIG_SYS_PPC_E500_DEBUG_TLB);
+	_mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_IPROT |
+			MAS1_TSIZE(BOOKE_PAGESZ_4M);
+	_mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
+	_mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
+	_mas7 = FSL_BOOKE_MAS7(flash_phys);
+
+	mtspr(MAS0, _mas0);
+	mtspr(MAS1, _mas1);
+	mtspr(MAS2, _mas2);
+	mtspr(MAS3, _mas3);
+	mtspr(MAS7, _mas7);
+
+	asm volatile("isync;msync;tlbwe;isync");
+#endif
+
+	/* Change flash's physical address */
 	out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
 	out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
 	out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 597151b..1cfd08a 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -182,6 +182,72 @@ l2_disabled:
 	andi.	r1,r3,L1CSR0_DCE at l
 	beq	2b
 
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB)
+/*
+ * TLB entry for debuggging in AS1
+ * Create temporary TLB entry in AS0 to handle debug exception
+ * As on debug exception MSR is cleared i.e. Address space is changed
+ * to 0. A TLB entry (in AS0) is required to handle debug exception generated
+ * in AS1.
+ */
+
+	lis     r6,FSL_BOOKE_MAS0(1,
+			CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
+	ori     r6,r6,FSL_BOOKE_MAS0(1,
+			CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
+
+#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
+ * and this window is outside of 4K boot window.
+ */
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
+
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
+							(MAS2_I|MAS2_G))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
+							(MAS2_I|MAS2_G))@l
+
+	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
+	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
+
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
+
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * because "nexti" will resize TLB to 4K
+ */
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
+
+	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
+							(MAS2_I))@l
+	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
+						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
+	mtspr   MAS0,r6
+	mtspr   MAS1,r7
+	mtspr   MAS2,r8
+	mtspr   MAS3,r9
+	tlbwe
+	isync
+#endif
+
 /*
  * Ne need to setup interrupt vector for NAND SPL
  * because NAND SPL never compiles it.
-- 
1.7.5.4





More information about the U-Boot mailing list