[U-Boot] [PATCH V4 3/8] imx: fec: Resolve speed before configuring gasket

[Troy Kisky]

On 4/19/2012 2:13 PM, Troy Kisky wrote:
> On 4/19/2012 1:18 PM, Timo Ketola wrote:
>> On 19.04.2012 22:27, Troy Kisky wrote:
>>> On 4/19/2012 1:55 AM, Timo Ketola wrote:
>>>> -#if !defined(CONFIG_MII)
>>>> - /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
>>>> - writew(MIIGSK_CFGR_IF_MODE_RMII,&fec->eth->miigsk_cfgr);
>>>> +#if defined(CONFIG_RMII)
>>>
>>> While this change seems to make sense, it could break some boards.
>>
>> Please explain how. Every board using fec_mxc define CONFIG_MII - 
>> they have to:
>>
>> #ifndef CONFIG_MII
>> #error "CONFIG_MII has to be defined!"
>> #endif
> Does every board that has a gasket define CONFIG_RMII?
>
> Or are you saying that every board with a gasket is already broken?
That should be
  "Or are you saying that every board using a reduced pin code is alread 
broken?"

>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>