[U-Boot] [PATCH V2] MX35: mx35pdk: wrong board revision

[Fabio Estevam]

On 4/9/12, Stefano Babic <sbabic at denx.de> wrote:
> The board revision is detected accessing to the pmic,
> that is not available before relocation (I2C).
> This generates the following error:
>
> CPU:   Freescale i.MX35 rev 2.0 at 532 MHz.
> Reset cause: WDOG
> <reg num> = 7 is invalid. Should be less than 0
> Board: MX35 PDK 1.0
>
> The revision number is wrong, as a default value is printed
> (tested on a mx35pdk Rev. 2.0).
>
> Move the output in the board_late_init(), when
> pmic can be accessed.
>
> Signed-off-by: Stefano Babic <sbabic at denx.de>
> ---
>
> V2: drop dead code
>
>  board/freescale/mx35pdk/mx35pdk.c |   11 -----------
>  include/configs/mx35pdk.h         |    1 -
>  2 files changed, 0 insertions(+), 12 deletions(-)

Looks like there is something wrong with this patch: 12 deletions and
no insertions.

Comparing it with v1 I would expect that only the "#if 0 and #endif"
were removed.

Regards,

Fabio Estevam