[U-Boot] [PATCH v3] Add support for MINI2440 (s3c2440). Documentation about the product can be found on: http://www.friendlyarm.net/products/mini2440

[Vasily Khoruzhick]

2012/4/21 Ilya Averyanov <averyanovin+uboot at gmail.com>:
>
> No have problem.
> Available only if you boot from NOR flash.
> If you boot from the NAND 4kb of SRAM (steppingstone) not available.

For NAND boot it's mapped at 0x0
For NOR boot it's mapped at 0x40000000

NAND controller uses it for booting purpose, but anyway for SPL we
should fit code into
4k (hardware limitation), so I think using assembly here for SDRAM init is OK.

Regards
Vasily