[U-Boot] [GIT PULL] Pull request: u-boot-imx

Albert ARIBAUD albert.u.boot at aribaud.net
Mon Apr 16 15:04:00 CEST 2012


Hi Stefano,

Le 11/04/2012 16:22, Stefano Babic a écrit :
> Hi Albert,
>
> please pull from u-boot-imx. Note: I rebased on u-boot mainline, because
> I needed some patches for testing that were merged by Wolfgang, and I
> could not find in u-boot-arm. Let me know if this is a problem for you ;-)
>
> The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
>
>    Merge branch 'marek.vasut at gmail.com' of
> git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)
>
> are available in the git repository at:
>
>    git://www.denx.de/git/u-boot-imx.git master
>
> Anatolij Gustschin (1):
>        ARM1136: add cache flush and invalidate operations
>
> Eric Nelson (3):
>        i.MX6: define CACHELINE_SIZE
>        i.MX6: implement enable_caches()
>        i.MX6: mx6qsabrelite: add cache commands if cache is enabled
>
> Fabio Estevam (4):
>        mx28: Split the README into a common part and a m28 specific part
>        mx28evk: Add a README file
>        mx6qsabrelite: Add boot switch setting information into the README
>        mx6qsabrelite: Fix the serial console port
>
> Marek Vasut (4):
>        i.MX28: Fix initial stack pointer position
>        i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
>        DMA: Split the APBH DMA init into block and channel init
>        M28: Pull out CONFIG_APBH_DMA so it's always enabled
>
> Stefano Babic (7):
>        ARM: 926ejs: use debug() for misaligned addresses
>        mx35: flea3: fix when cache functions are linked
>        mx35: mx35pdk: fix when cache functions are linked
>        MX31: mx31pdk: drop enable_caches from board file
>        ARM: add u-boot.imx as target for i.MX SOCs
>        ARM1136: MX35: Make asm routines volatile in cache ops
>        MX35: mx35pdk: wrong board revision
>
> Troy Kisky (1):
>        MX53: DDR: Fix ZQHWCTRL field TZQ_CS
>
> Vikram Narayanan (4):
>        imx: Remove unneeded/repititive definitions from imx headers
>        imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
>        imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio>>  5)
>        imx: Return gpio_set_value in gpio_direction_output
>
>   arch/arm/cpu/arm1136/cpu.c                 |  103 ++++++++++++-
>   arch/arm/cpu/arm926ejs/cache.c             |    2 +-
>   arch/arm/cpu/arm926ejs/mx28/mx28.c         |    6 +
>   arch/arm/cpu/armv7/config.mk               |    3 +
>   arch/arm/cpu/armv7/mx6/soc.c               |    8 +
>   arch/arm/include/asm/arch-mx28/dma.h       |    4 +-
>   arch/arm/include/asm/arch-mx35/mx35_pins.h |    2 -
>   arch/arm/include/asm/arch-mx5/mx5x_pins.h  |    2 -
>   arch/arm/include/asm/arch-mx6/imx-regs.h   |    4 +-
>   board/freescale/mx31pdk/mx31pdk.c          |    8 -
>   board/freescale/mx35pdk/mx35pdk.c          |   11 --
>   board/freescale/mx53ard/imximage_dd3.cfg   |    2 +-
>   board/freescale/mx53evk/imximage.cfg       |    2 +-
>   board/freescale/mx53loco/imximage.cfg      |    2 +-
>   board/freescale/mx53smd/imximage.cfg       |    2 +-
>   doc/README.m28                             |  219
> +--------------------------
>   doc/README.mx28_common                     |  226
> ++++++++++++++++++++++++++++
>   doc/README.mx28evk                         |   29 ++++
>   doc/README.mx6qsabrelite                   |    3 +-
>   drivers/dma/apbh_dma.c                     |   38 ++---
>   drivers/gpio/mxc_gpio.c                    |   12 +-
>   drivers/mmc/mxsmmc.c                       |   53 +++++++-
>   drivers/mtd/nand/mxs_nand.c                |   11 +-
>   include/configs/flea3.h                    |    2 +
>   include/configs/m28evk.h                   |    8 +-
>   include/configs/mx28evk.h                  |    2 +-
>   include/configs/mx35pdk.h                  |    3 +-
>   include/configs/mx6qarm2.h                 |    2 +
>   include/configs/mx6qsabrelite.h            |    8 +-
>   29 files changed, 492 insertions(+), 285 deletions(-)
>   create mode 100644 doc/README.mx28_common
>   create mode 100644 doc/README.mx28evk
>
>
> Stefano

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list