[U-Boot] [PATCH] cmd_sf: add size checking to spi flash commands

[Gerlando Falauto]

SPI flash operations inadvertently stretching beyond the flash size will
result in a wraparound. This may be particularly dangerous when burning
u-boot, because the flash contents will be corrupted rendering the board
unusable, without any warning being issued.
So add a consistency checking so not to overflow past the flash size.

Signed-off-by: Gerlando Falauto <gerlando.falauto at keymile.com>
Cc: Valentin Longchamp <valentin.longchamp at keymile.com>
Cc: Holger Brunck <holger.brunck at keymile.com>
---
 common/cmd_sf.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 9c76464..3cfedde 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -211,6 +211,13 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
 	if (*argv[3] == 0 || *endp != 0)
 		return -1;
 
+	/* Consistency checking */
+	if (offset + len > flash->size) {
+		printf("ERROR: Attempting SPI flash %s past flash size (0x%x)\n",
+			argv[0], flash->size);
+		return 1;
+	}
+
 	buf = map_physmem(addr, len, MAP_WRBACK);
 	if (!buf) {
 		puts("Failed to map physical memory\n");
@@ -252,6 +259,13 @@ static int do_spi_flash_erase(int argc, char * const argv[])
 	if (ret != 1)
 		return -1;
 
+	/* Consistency checking */
+	if (offset + len > flash->size) {
+		printf("ERROR: Attempting SPI flash %s past flash size (0x%x)\n",
+			argv[0], flash->size);
+		return 1;
+	}
+
 	ret = spi_flash_erase(flash, offset, len);
 	if (ret) {
 		printf("SPI flash %s failed\n", argv[0]);
-- 
1.7.1