[U-Boot] [PATCH v3 5/7] tegra: fdt: Add NAND definitions to fdt

[Simon Glass]

Add a flash node to handle the NAND, including memory timings and
page / block size information.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Update NAND binding to add "nvidia," prefix

Changes in v3:
- Add reg property for unit address (should be used for chip select)
- Update fdt binding to make everything Nvidia-specific

 board/nvidia/dts/tegra2-seaboard.dts |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/board/nvidia/dts/tegra2-seaboard.dts b/board/nvidia/dts/tegra2-seaboard.dts
index 08ada8c..72a5f5d 100644
--- a/board/nvidia/dts/tegra2-seaboard.dts
+++ b/board/nvidia/dts/tegra2-seaboard.dts
@@ -126,4 +126,20 @@
 				0x00000000 0x00000000 0x00000000 0x00000000 >;
 		};
 	};
+
+	nand-controller at 70008000 {
+		nvidia,wp-gpios = <&gpio 59 0>;		/* PH3 */
+		nvidia,width = <8>;
+		nvidia,timing = <26 100 20 80 20 10 12 10 70>;
+		nand at 0 {
+			reg = <0>;
+			compatible = "hynix,hy27uf4g2b", "nand-flash";
+			nvidia,page-data-bytes = <2048>;
+			nvidia,tag-ecc-bytes = <4>;
+			nvidia,tag-bytes = <20>;
+			nvidia,data-ecc-bytes = <36>;
+			nvidia,skipped-spare-bytes = <4>;
+			nvidia,page-spare-bytes = <64>;
+		};
+	};
 };
-- 
1.7.7.3