[U-Boot] [PATCH v3 4/7] tegra: fdt: Add NAND controller binding and definitions
Scott Wood
scottwood at freescale.com
Tue Apr 17 22:31:25 CEST 2012
On 04/17/2012 03:18 PM, Simon Glass wrote:
> +Jim, who wrote the driver originally
>
> Hi Scott,
>
> On Tue, Apr 17, 2012 at 12:06 PM, Scott Wood <scottwood at freescale.com> wrote:
>>> + - nvidia,page-data-bytes : Number of bytes in the data area
>>> + - nvidia,page-spare-bytes : Number of bytes in spare area
>>> + spare area = skipped-spare-bytes + data-ecc-bytes + tag-bytes
>>> + + tag-ecc-bytes
>>
>> Do you really need this stuff to be in the device tree? You should be
>> able to determine this information from the ID table.
>
> I suspect so - the driver originally had a lot of CONFIGs for this.
> Maybe someone who wants to take it further could do this as part of
> supporting ONFI?
>
> I will see if Jim Lin can take another look.
You don't need ONFI to get the page/spare size out of the ID table.
The generic NAND code should already be doing this for you (fills in
mtd->writesize and mtd->oobsize). If you need it during setup, we now
have CONFIG_SYS_NAND_SELF_INIT that allows splitting up
nand_scan_ident() from nand_scan_tail().
>>> +Nvidia NAND Controller
>>> +----------------------
>>> +
>>> +The device node for a NAND flash controller is as follows:
>>> +
>>> +Optional properties:
>>> +
>>> +nvidia,wp-gpios : GPIO of write-protect line, three cells in the format:
>>> + phandle, parameter, flags
>>
>> Doesn't the number of cells depend on the GPIO controller binding?
>
> Yes, but this is the binding Tegra uses.
Still, it doesn't belong in the NAND binding. Maybe a future chip wants
to use this NAND binding but a different GPIO binding. If nothing else,
people tend to copy-and-paste such descriptions. We've still got people
adding bindings for Freescale devices saying interrupts are encoded as a
pair of cells, even though the interrupt controller now uses four cells
per interrupt.
-Scott
More information about the U-Boot
mailing list