[U-Boot] [PATCH 3/4] USB: Drop cache flush bloat in EHCI-HCD
Marek Vasut
marex at denx.de
Mon Apr 9 05:09:51 CEST 2012
Discard the creepy cache flushing mechanisms in ehci-hcd.c and replace them with
more straightforward flushing. In the new approach, the flushing takes place
directly in ehci_submit_async() call instead of going through the QH list and
flushing all members and buffers. This discards a lot of weird bit operations
on the members of QH and qTD structures.
NOTE: Certainly, this flushes even qTDs which are possibly unused in some
transactions, though the overhead of the previous code was much higher than is
the overhead of flushing two more cache lines (which most probably aren't even
cached).
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Puneet Saxena <puneets at nvidia.com>
---
drivers/usb/host/ehci-hcd.c | 123 ++++++++-----------------------------------
1 files changed, 23 insertions(+), 100 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 8ac0b44..55fe067 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -108,99 +108,6 @@ static struct descriptor {
#define ehci_is_TDI() (0)
#endif
-#if defined(CONFIG_EHCI_DCACHE)
-/*
- * Routines to handle (flush/invalidate) the dcache for the QH and qTD
- * structures and data buffers. This is needed on platforms using this
- * EHCI support with dcache enabled.
- */
-static void flush_invalidate(u32 addr, int size, int flush)
-{
- if (flush)
- flush_dcache_range(addr, addr + size);
- else
- invalidate_dcache_range(addr, addr + size);
-}
-
-static void cache_qtd(struct qTD *qtd, int flush)
-{
- u32 *ptr = (u32 *)qtd->qt_buffer[0];
- int len = (qtd->qt_token & 0x7fff0000) >> 16;
-
- flush_invalidate((u32)qtd, sizeof(struct qTD), flush);
- if (ptr && len)
- flush_invalidate((u32)ptr, len, flush);
-}
-
-
-static inline struct QH *qh_addr(struct QH *qh)
-{
- return (struct QH *)((u32)qh & 0xffffffe0);
-}
-
-static void cache_qh(struct QH *qh, int flush)
-{
- struct qTD *qtd;
- struct qTD *next;
- static struct qTD *first_qtd;
-
- /*
- * Walk the QH list and flush/invalidate all entries
- */
- while (1) {
- flush_invalidate((u32)qh_addr(qh), sizeof(struct QH), flush);
- if ((u32)qh & QH_LINK_TYPE_QH)
- break;
- qh = qh_addr(qh);
- qh = (struct QH *)qh->qh_link;
- }
- qh = qh_addr(qh);
-
- /*
- * Save first qTD pointer, needed for invalidating pass on this QH
- */
- if (flush)
- first_qtd = qtd = (struct qTD *)(*(u32 *)&qh->qh_overlay &
- 0xffffffe0);
- else
- qtd = first_qtd;
-
- /*
- * Walk the qTD list and flush/invalidate all entries
- */
- while (1) {
- if (qtd == NULL)
- break;
- cache_qtd(qtd, flush);
- next = (struct qTD *)((u32)qtd->qt_next & 0xffffffe0);
- if (next == qtd)
- break;
- qtd = next;
- }
-}
-
-static inline void ehci_flush_dcache(struct QH *qh)
-{
- cache_qh(qh, 1);
-}
-
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
- cache_qh(qh, 0);
-}
-#else /* CONFIG_EHCI_DCACHE */
-/*
- *
- */
-static inline void ehci_flush_dcache(struct QH *qh)
-{
-}
-
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
-}
-#endif /* CONFIG_EHCI_DCACHE */
-
void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
mdelay(50);
@@ -263,12 +170,20 @@ out:
static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
{
- uint32_t addr, delta, next;
+ uint32_t delta, next;
+ uint32_t addr = (uint32_t)buf;
+ size_t rsz = roundup(sz, 32);
int idx;
- addr = (uint32_t) buf;
+ if (sz != rsz)
+ debug("EHCI-HCD: Misaligned buffer size (%08x)\n", sz);
+
+ if (addr & ~31)
+ debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf);
+
idx = 0;
while (idx < 5) {
+ flush_dcache_range(addr, addr + rsz);
td->qt_buffer[idx] = cpu_to_hc32(addr);
td->qt_buffer_hi[idx] = 0;
next = (addr + 4096) & ~4095;
@@ -317,6 +232,8 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
memset(&qh, 0, sizeof(struct QH));
memset(qtd, 0, sizeof(qtd));
+ toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
qh.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
usb_pipeendpoint(pipe) == 0) ? 1 : 0;
@@ -337,9 +254,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
tdp = &qh.qh_overlay.qt_next;
- toggle =
- usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
-
if (req != NULL) {
qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
@@ -391,7 +305,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
qh_list.qh_link = cpu_to_hc32((uint32_t)&qh | QH_LINK_TYPE_QH);
/* Flush dcache */
- ehci_flush_dcache(&qh_list);
+ flush_dcache_range((uint32_t)&qh_list,
+ (uint32_t)&qh_list + sizeof(struct QH));
+ flush_dcache_range((uint32_t)&qh, (uint32_t)&qh + sizeof(struct QH));
+ flush_dcache_range((uint32_t)qtd, (uint32_t)qtd + sizeof(qtd));
usbsts = ehci_readl(&hcor->or_usbsts);
ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
@@ -414,7 +331,13 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
timeout = USB_TIMEOUT_MS(pipe);
do {
/* Invalidate dcache */
- ehci_invalidate_dcache(&qh_list);
+ invalidate_dcache_range((uint32_t)&qh_list,
+ (uint32_t)&qh_list + sizeof(struct QH));
+ invalidate_dcache_range((uint32_t)&qh,
+ (uint32_t)&qh + sizeof(struct QH));
+ invalidate_dcache_range((uint32_t)qtd,
+ (uint32_t)qtd + sizeof(qtd));
+
token = hc32_to_cpu(vtd->qt_token);
if (!(token & 0x80))
break;
--
1.7.9.1
More information about the U-Boot
mailing list