[U-Boot] [PATCH] Add support s3c2440 NAND controller
Ilya Averyanov
averyanovin at gmail.com
Tue Apr 24 18:42:24 CEST 2012
Dear Marek Vasut
>
> Dear Ilya Averyanov,
>
> please always Cc the mainline list. Also, I'm now s3c2440 person, I have
> no
> relationship with this chip at all ...
>
> > arch/arm/include/asm/arch-s3c24x0/s3c2410.h | 4 +-
> > arch/arm/include/asm/arch-s3c24x0/s3c2440.h | 4 +-
> > arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 13 +-
> > drivers/mtd/nand/Makefile | 3 +-
> > drivers/mtd/nand/s3c2410_nand.c | 189 -------------------
> > drivers/mtd/nand/s3c24x0_nand.c | 268
> > +++++++++++++++++++++++++++
> > 6 files changed, 283 insertions(+), 198 deletions(-)
> > delete mode 100644 drivers/mtd/nand/s3c2410_nand.c
> > create mode 100644 drivers/mtd/nand/s3c24x0_nand.c
> >
> > diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h
> > b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h
> > index 4fbdf20..71eb33e 100644
> > --- a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h
> > +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h
> > @@ -99,9 +99,9 @@ static inline struct s3c24x0_lcd
> > *s3c24x0_get_base_lcd(void)
> > return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
> > }
> >
> > -static inline struct s3c2410_nand *s3c2410_get_base_nand(void)
> > +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
> > {
> > - return (struct s3c2410_nand *)S3C2410_NAND_BASE;
> > + return (struct s3c24x0_nand *)S3C2410_NAND_BASE;
> > }
> >
> > static inline struct s3c24x0_uart
> > diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> > b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> > index 8c606e3..8b9a5b0 100644
> > --- a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> > +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h
> > @@ -97,9 +97,9 @@ static inline struct s3c24x0_lcd
> > *s3c24x0_get_base_lcd(void)
> > return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
> > }
> >
> > -static inline struct s3c2440_nand *s3c2440_get_base_nand(void)
> > +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
>
> get_nand_base might be better? And what if this returned the value by
> checking
> what CPU this runs on at runtime?
It's good idea. But i have question.
How should look like a function get_nand_base?
Simply switch which, depending on CPUID returns the address?
And where it should be located?
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h?
>
> > {
> > - return (struct s3c2440_nand *)S3C2440_NAND_BASE;
> > + return (struct s3c24x0_nand *)S3C2440_NAND_BASE;
> > }
> >
> > static inline struct s3c24x0_uart
> > diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> > b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> > index ca978c9..d82251d 100644
> > --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> > +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
> > @@ -151,20 +151,19 @@ struct s3c24x0_lcd {
> > };
> >
> >
> > +
> > +struct s3c24x0_nand {
> > #ifdef CONFIG_S3C2410
>
> Please don't put ifdefs into the structure ... also, this is weird, don't
> create
> structure like that. What is the difference between the chips so the
> structure
> can't be shared in one form?
>
struct s3c24x0_nand { /* NAND FLASH (see S3C2410 manual chapter 6) */
u32 nfconf;
u32 nfcmd;
u32 nfaddr;
u32 nfdata;
u32 nfstat;
u32 nfecc;
};
struct s3c24x0_nand {/* NAND FLASH (see S3C2440 manual chapter 6) */
u32 nfconf;
u32 nfcont;
u32 nfcmd;
u32 nfaddr;
u32 nfdata;
u32 nfeccd0;
u32 nfeccd1;
u32 nfeccd;
u32 nfstat;
u32 nfstat0;
u32 nfstat1;
};
On S3C2440 added new register nfcont, after nfconf and full change ECC
registers.
> > /* NAND FLASH (see S3C2410 manual chapter 6) */
> > -struct s3c2410_nand {
> > u32 nfconf;
> > u32 nfcmd;
> > u32 nfaddr;
> > u32 nfdata;
> > u32 nfstat;
> > u32 nfecc;
> > -};
> > #endif
> > #ifdef CONFIG_S3C2440
> > /* NAND FLASH (see S3C2440 manual chapter 6) */
> > -struct s3c2440_nand {
> > u32 nfconf;
> > u32 nfcont;
> > u32 nfcmd;
> > @@ -176,8 +175,14 @@ struct s3c2440_nand {
> > u32 nfstat;
> > u32 nfstat0;
> > u32 nfstat1;
> > -};
> > + u32 nfmecc0;
> > + u32 nfmecc1;
> > + u32 nfsecc;
> > + u32 nfsblk;
> > + u32 nfeblk;
> > #endif
> > +};
> > +
> >
> >
> > /* UART (see manual chapter 11) */
> > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> > index 1d1b628..b080cf7 100644
> > --- a/drivers/mtd/nand/Makefile
> > +++ b/drivers/mtd/nand/Makefile
> > @@ -58,7 +58,8 @@ COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
> > COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
> > COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
> > COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
> > -COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
> > +COBJS-$(CONFIG_NAND_S3C2410) += s3c24x0_nand.o
> > +COBJS-$(CONFIG_NAND_S3C2440) += s3c24x0_nand.o
> > COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
> > COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o
> > COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
> > diff --git a/drivers/mtd/nand/s3c2410_nand.c
> > b/drivers/mtd/nand/s3c2410_nand.c
> > deleted file mode 100644
> > index e1a459b..0000000
> > --- a/drivers/mtd/nand/s3c2410_nand.c
> > +++ /dev/null
> > @@ -1,189 +0,0 @@
> > -/*
> > - * (C) Copyright 2006 OpenMoko, Inc.
> > - * Author: Harald Welte <laforge at openmoko.org>
> > - *
> > - * This program is free software; you can redistribute it and/or
> > - * modify it under the terms of the GNU General Public License as
> > - * published by the Free Software Foundation; either version 2 of
> > - * the License, or (at your option) any later version.
> > - *
> > - * This program is distributed in the hope that it will be useful,
> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > - * GNU General Public License for more details.
> > - *
> > - * You should have received a copy of the GNU General Public License
> > - * along with this program; if not, write to the Free Software
> > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > - * MA 02111-1307 USA
> > - */
> > -
> > -#include <common.h>
> > -
> > -#include <nand.h>
> > -#include <asm/arch/s3c24x0_cpu.h>
> > -#include <asm/io.h>
> > -
> > -#define S3C2410_NFCONF_EN (1<<15)
> > -#define S3C2410_NFCONF_512BYTE (1<<14)
> > -#define S3C2410_NFCONF_4STEP (1<<13)
> > -#define S3C2410_NFCONF_INITECC (1<<12)
> > -#define S3C2410_NFCONF_nFCE (1<<11)
> > -#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
> > -#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
> > -#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
> > -
> > -#define S3C2410_ADDR_NALE 4
> > -#define S3C2410_ADDR_NCLE 8
> > -
> > -#ifdef CONFIG_NAND_SPL
> > -
> > -/* in the early stage of NAND flash booting, printf() is not available
> > */
> > -#define printf(fmt, args...)
> > -
> > -static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> > -{
> > - int i;
> > - struct nand_chip *this = mtd->priv;
> > -
> > - for (i = 0; i < len; i++)
> > - buf[i] = readb(this->IO_ADDR_R);
> > -}
> > -#endif
> > -
> > -static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned
> > int
> > ctrl)
> > -{
> > - struct nand_chip *chip = mtd->priv;
> > - struct s3c2410_nand *nand = s3c2410_get_base_nand();
> > -
> > - debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
> > -
> > - if (ctrl & NAND_CTRL_CHANGE) {
> > - ulong IO_ADDR_W = (ulong)nand;
> > -
> > - if (!(ctrl & NAND_CLE))
> > - IO_ADDR_W |= S3C2410_ADDR_NCLE;
> > - if (!(ctrl & NAND_ALE))
> > - IO_ADDR_W |= S3C2410_ADDR_NALE;
> > -
> > - chip->IO_ADDR_W = (void *)IO_ADDR_W;
> > -
> > - if (ctrl & NAND_NCE)
> > - writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE,
> > - &nand->nfconf);
> > - else
> > - writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE,
> > - &nand->nfconf);
> > - }
> > -
> > - if (cmd != NAND_CMD_NONE)
> > - writeb(cmd, chip->IO_ADDR_W);
> > -}
> > -
> > -static int s3c2410_dev_ready(struct mtd_info *mtd)
> > -{
> > - struct s3c2410_nand *nand = s3c2410_get_base_nand();
> > - debug("dev_ready\n");
> > - return readl(&nand->nfstat) & 0x01;
> > -}
> > -
> > -#ifdef CONFIG_S3C2410_NAND_HWECC
> > -void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
> > -{
> > - struct s3c2410_nand *nand = s3c2410_get_base_nand();
> > - debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
> > - writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC,
> > &nand->nfconf);
> > -}
> > -
> > -static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const
> > u_char
> > *dat,
> > - u_char *ecc_code)
> > -{
> > - struct s3c2410_nand *nand = s3c2410_get_base_nand();
> > - ecc_code[0] = readb(&nand->nfecc);
> > - ecc_code[1] = readb(&nand->nfecc + 1);
> > - ecc_code[2] = readb(&nand->nfecc + 2);
> > - debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
> > - mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
> > -
> > - return 0;
> > -}
> > -
> > -static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
> > - u_char *read_ecc, u_char *calc_ecc)
> > -{
> > - if (read_ecc[0] == calc_ecc[0] &&
> > - read_ecc[1] == calc_ecc[1] &&
> > - read_ecc[2] == calc_ecc[2])
> > - return 0;
> > -
> > - printf("s3c2410_nand_correct_data: not implemented\n");
> > - return -1;
> > -}
> > -#endif
> > -
> > -int board_nand_init(struct nand_chip *nand)
> > -{
> > - u_int32_t cfg;
> > - u_int8_t tacls, twrph0, twrph1;
> > - struct s3c24x0_clock_power *clk_power =
> > s3c24x0_get_base_clock_power(); - struct s3c2410_nand *nand_reg =
> > s3c2410_get_base_nand();
> > -
> > - debug("board_nand_init()\n");
> > -
> > - writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
> > -
> > - /* initialize hardware */
> > -#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
> > - tacls = CONFIG_S3C24XX_TACLS;
> > - twrph0 = CONFIG_S3C24XX_TWRPH0;
> > - twrph1 = CONFIG_S3C24XX_TWRPH1;
> > -#else
> > - tacls = 4;
> > - twrph0 = 8;
> > - twrph1 = 8;
> > -#endif
> > -
> > - cfg = S3C2410_NFCONF_EN;
> > - cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
> > - cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
> > - cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
> > - writel(cfg, &nand_reg->nfconf);
> > -
> > - /* initialize nand_chip data structure */
> > - nand->IO_ADDR_R = (void *)&nand_reg->nfdata;
> > - nand->IO_ADDR_W = (void *)&nand_reg->nfdata;
> > -
> > - nand->select_chip = NULL;
> > -
> > - /* read_buf and write_buf are default */
> > - /* read_byte and write_byte are default */
> > -#ifdef CONFIG_NAND_SPL
> > - nand->read_buf = nand_read_buf;
> > -#endif
> > -
> > - /* hwcontrol always must be implemented */
> > - nand->cmd_ctrl = s3c2410_hwcontrol;
> > -
> > - nand->dev_ready = s3c2410_dev_ready;
> > -
> > -#ifdef CONFIG_S3C2410_NAND_HWECC
> > - nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
> > - nand->ecc.calculate = s3c2410_nand_calculate_ecc;
> > - nand->ecc.correct = s3c2410_nand_correct_data;
> > - nand->ecc.mode = NAND_ECC_HW;
> > - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
> > - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
> > -#else
> > - nand->ecc.mode = NAND_ECC_SOFT;
> > -#endif
> > -
> > -#ifdef CONFIG_S3C2410_NAND_BBT
> > - nand->options = NAND_USE_FLASH_BBT;
> > -#else
> > - nand->options = 0;
> > -#endif
> > -
> > - debug("end of nand_init\n");
> > -
> > - return 0;
> > -}
> > diff --git a/drivers/mtd/nand/s3c24x0_nand.c
> > b/drivers/mtd/nand/s3c24x0_nand.c
> > new file mode 100644
> > index 0000000..67b44ee
> > --- /dev/null
> > +++ b/drivers/mtd/nand/s3c24x0_nand.c
> > @@ -0,0 +1,268 @@
> > +/*
> > + * (C) Copyright 2006 OpenMoko, Inc.
> > + * Author: Harald Welte <laforge at openmoko.org>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +
> > +#include <nand.h>
> > +#include <asm/arch/s3c24x0_cpu.h>
> > +#include <asm/io.h>
> > +
> > +#define S3C2410_NFCONF_EN (1<<15)
> > +#define S3C2410_NFCONF_512BYTE (1<<14)
> > +#define S3C2410_NFCONF_4STEP (1<<13)
> > +#define S3C2410_NFCONF_INITECC (1<<12)
> > +#define S3C2410_NFCONF_nFCE (1<<11)
> > +#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
> > +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
> > +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
> > +
> > +#define S3C2410_ADDR_NALE 4
> > +#define S3C2410_ADDR_NCLE 8
> > +
> > +#define S3C2440_NFCONT_INITECC (1<<4)
> > +#define S3C2440_NFCONF_nFCE (1<<1)
> > +#define S3C2440_ADDR_NALE 0x8
> > +#define S3C2440_ADDR_NCLE 0xC
> > +
> > +#ifdef CONFIG_NAND_SPL
> > +
> > +/* in the early stage of NAND flash booting, printf() is not available
> > */
> > +#define printf(fmt, args...)
> > +
> > +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> > +{
> > + int i;
> > + struct nand_chip *this = mtd->priv;
> > +
> > + for (i = 0; i < len; i++)
> > + buf[i] = readb(this->IO_ADDR_R);
> > +}
> > +#endif
> > +
> > +#ifdef CONFIG_S3C2440
> > +static void s3c2440_hwcontrol(struct mtd_info *mtd, int cmd, unsigned
> > int
> > ctrl)
> > +{
> > + struct nand_chip *chip = mtd->priv;
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > +
> > +
> > + debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
> > +
> > + if (ctrl & NAND_CTRL_CHANGE) {
> > + ulong IO_ADDR_W = (ulong)nand;
> > +
> > + if (!(ctrl & NAND_CLE))
> > + IO_ADDR_W |= S3C2440_ADDR_NCLE;
> > + if (!(ctrl & NAND_ALE))
> > + IO_ADDR_W |= S3C2440_ADDR_NALE;
> > +
> > + chip->IO_ADDR_W = (void *)IO_ADDR_W;
> > +
> > + if (ctrl & NAND_NCE)
> > + writel(readl(&nand->nfcont) & ~S3C2440_NFCONF_nFCE,
> > + &nand->nfcont);
> > + else
> > + writel(readl(&nand->nfcont) | S3C2440_NFCONF_nFCE,
> > + &nand->nfcont);
> > + }
> > +
> > + if (cmd != NAND_CMD_NONE)
> > + writeb(cmd, chip->IO_ADDR_W);
> > +}
> > +
> > +static int s3c2440_dev_ready(struct mtd_info *mtd)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + debug("dev_ready\n");
>
> "%s", __func__ ?
>
> > + return readl(&nand->nfstat) & 0x01;
> > +}
> > +#else
> > +static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned
> > int
> > ctrl)
> > +{
> > + struct nand_chip *chip = mtd->priv;
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > +
> > +
> > + debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
> > +
> > + if (ctrl & NAND_CTRL_CHANGE) {
> > + ulong IO_ADDR_W = (ulong)nand;
> > +
> > + if (!(ctrl & NAND_CLE))
> > + IO_ADDR_W |= S3C2410_ADDR_NCLE;
> > + if (!(ctrl & NAND_ALE))
> > + IO_ADDR_W |= S3C2410_ADDR_NALE;
> > +
> > + chip->IO_ADDR_W = (void *)IO_ADDR_W;
> > +
> > + if (ctrl & NAND_NCE)
> > + writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE,
> > + &nand->nfconf);
> > + else
> > + writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE,
> > + &nand->nfconf);
> > + }
> > +
> > + if (cmd != NAND_CMD_NONE)
> > + writeb(cmd, chip->IO_ADDR_W);
> > +}
> > +
> > +static int s3c2410_dev_ready(struct mtd_info *mtd)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + debug("dev_ready\n");
> > + return readl(&nand->nfstat) & 0x01;
> > +}
> > +#endif
> > +
> > +#ifdef CONFIG_SYS_S3C2440_NAND_HWECC
> > +void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
> > + writel((readl(&nand->nfcont) & ~(1 << 5)) | S3C2440_NFCONT_INITECC,
> > &nand->nfcont);
>
> Magic, also use clrsetbits_le32 and friends for this biz.
>
> > +}
> > +
> > +static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const
> > u_char
> > *dat,
> > + u_char *ecc_code)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + unsigned long ecc = readl(&nand->nfmecc0);
> > +
> > + ecc_code[0] = ecc;
> > + ecc_code[1] = ecc >> 8;
> > + ecc_code[2] = ecc >> 16;
> > + debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
> > + mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
> > +
> > + return 0;
> > +}
> > +
> > +#elif defined(CONFIG_SYS_S3C2410_NAND_HWECC)
> > +void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
> > + writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC,
> > &nand->nfconf);
> > +}
> > +
> > +static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const
> > u_char
> > *dat,
> > + u_char *ecc_code)
> > +{
> > + struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
> > + ecc_code[0] = readb(&nand->nfecc);
> > + ecc_code[1] = readb(&nand->nfecc + 1);
> > + ecc_code[2] = readb(&nand->nfecc + 2);
> > + debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
> > + mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
> > +
> > + return 0;
> > +}
> > +#endif
> > +
> > +static int s3c24x0_nand_correct_data(struct mtd_info *mtd, u_char *dat,
> > + u_char *read_ecc, u_char *calc_ecc)
> > +{
> > + if (read_ecc[0] == calc_ecc[0] &&
> > + read_ecc[1] == calc_ecc[1] &&
> > + read_ecc[2] == calc_ecc[2])
> > + return 0;
> > +
> > + printf("s3c2410_nand_correct_data: not implemented\n");
> > + return -1;
> > +}
> > +
> > +int board_nand_init(struct nand_chip *nand)
> > +{
> > + u_int8_t tacls, twrph0, twrph1;
> > + struct s3c24x0_clock_power *clk_power =
> > s3c24x0_get_base_clock_power(); + struct s3c24x0_nand *nand_reg =
> > s3c24x0_get_base_nand();
> > +
> > + debug("board_nand_init()\n");
> > +
> > + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
> > +
> > + /* initialize hardware */
> > +#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
> > + tacls = CONFIG_S3C24XX_TACLS;
> > + twrph0 = CONFIG_S3C24XX_TWRPH0;
> > + twrph1 = CONFIG_S3C24XX_TWRPH1;
> > +#else
> > + tacls = 4;
> > + twrph0 = 8;
> > + twrph1 = 8;
> > +#endif
> > +
> > +#ifdef CONFIG_S3C2440
> > + writel(readl(&nand_reg->nfconf) | ((tacls-1)<<12)|((twrph0 -
> > 1)<<8)|((twrph1 - 1)<<4)|(0<<0), &nand_reg->nfconf);
> > +
> >
> > writel((0<<13)|(0<<12)|(0<<10)|(0<<9)|(0<<8)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1
> > <<0), &nand_reg->nfcont);
> > +#else
>
> Magic?
>
> > + writel(S3C2410_NFCONF_EN|S3C2410_NFCONF_TACLS(tacls -
> > 1)|S3C2410_NFCONF_TWRPH0(twrph0 - 1)|S3C2410_NFCONF_TWRPH1(twrph1 - 1) ,
> > + &nand_reg->nfconf);
> > +#endif
> > + /* initialize nand_chip data structure */
> > + nand->IO_ADDR_R = (void *)&nand_reg->nfdata;
> > + nand->IO_ADDR_W = (void *)&nand_reg->nfdata;
> > +
> > + nand->select_chip = NULL;
> > +
> > + /* read_buf and write_buf are default */
> > + /* read_byte and write_byte are default */
> > +#ifdef CONFIG_NAND_SPL
> > + nand->read_buf = nand_read_buf;
> > +#endif
> > +
> > + /* hwcontrol always must be implemented */
> > +#ifdef CONFIG_S3C2440
> > + nand->cmd_ctrl = s3c2440_hwcontrol;
> > + nand->dev_ready = s3c2440_dev_ready;
> > +#else
> > + nand->cmd_ctrl = s3c2410_hwcontrol;
> > + nand->dev_ready = s3c2410_dev_ready;
> > +#endif
> > +
> > +#ifdef CONFIG_SYS_S3C2440_NAND_HWECC
> > + nand->ecc.hwctl = s3c2440_nand_enable_hwecc;
> > + nand->ecc.calculate = s3c2440_nand_calculate_ecc;
> > + nand->ecc.correct = s3c24x0_nand_correct_data;
> > + nand->ecc.mode = NAND_ECC_HW;
> > + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
> > + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
> > +#elif defined(CONFIG_SYS_S3C2410_NAND_HWECC)
> > + nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
> > + nand->ecc.calculate = s3c2410_nand_calculate_ecc;
> > + nand->ecc.correct = s3c24x0_nand_correct_data;
> > + nand->ecc.mode = NAND_ECC_HW;
> > + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
> > + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
> > +#else
> > + nand->ecc.mode = NAND_ECC_SOFT;
> > +#endif
> > +
> > +#ifdef CONFIG_S3C2410_NAND_BBT
> > + nand->options = NAND_USE_FLASH_BBT;
>
> Just define nand options?
>
I don't understand.
> > +#else
> > + nand->options = 0;
> > +#endif
> > +
> > + debug("end of nand_init\n");
> > +
> > + return 0;
> > +}
More information about the U-Boot
mailing list