[U-Boot] [PATCH v3 1/3] usb:gadget:composite USB composite gadget support

Marek Vasut marex at denx.de
Tue Apr 17 17:32:07 CEST 2012


Dear Lukasz Majewski,

> USB Composite gadget implementation for u-boot. It builds on top
> of USB UDC drivers.
> 
> This commit is based on following files from Linux Kernel v2.6.36:
> 
> ./include/linux/usb/composite.h
> ./drivers/usb/gadget/composite.c
> 
> SHA1: d187abb9a83e6c6b6e9f2ca17962bdeafb4bc903
> 
> Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Marek Vasut <marex at denx.de>
> 
> ---
> Changes for v2:
> - Squash the strict kernel files with u-boot compatibility layer.
> - Removal of dead/kernel specific code
> - Comments corrected according to u-boot coding style
> Changes for v3:
> - Remove unlikely function call
> - Code indentation fixup
> 
> ---
>  drivers/usb/gadget/composite.c  | 1091
> +++++++++++++++++++++++++++++++++++++++ include/linux/usb/composite.h   | 
> 350 +++++++++++++
>  include/usb/lin_gadget_compat.h |   25 +-
>  3 files changed, 1464 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/usb/gadget/composite.c
>  create mode 100644 include/linux/usb/composite.h
> 
> diff --git a/drivers/usb/gadget/composite.c
> b/drivers/usb/gadget/composite.c new file mode 100644
> index 0000000..0415aa4
> --- /dev/null
> +++ b/drivers/usb/gadget/composite.c
> @@ -0,0 +1,1091 @@
> +/*
> + * composite.c - infrastructure for Composite USB Gadgets
> + *
> + * Copyright (C) 2006-2008 David Brownell
> + * U-boot porting: Lukasz Majewski <l.majewski at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 
> USA + */
> +#undef DEBUG
> +
> +#include <linux/bitops.h>
> +#include <linux/usb/composite.h>
> +
> +/* big enough to hold our biggest descriptor */
> +#define USB_BUFSIZ	4096
> +
> +static struct usb_composite_driver *composite;
> +
> +/**
> + * usb_add_function() - add a function to a configuration
> + * @config: the configuration
> + * @function: the function being added
> + * Context: single threaded during gadget setup
> + *
> + * After initialization, each configuration must have one or more
> + * functions added to it.  Adding a function involves calling its @bind()
> + * method to allocate resources such as interface and string identifiers
> + * and endpoints.
> + *
> + * This function returns the value of the function's bind(), which is
> + * zero for success else a negative errno value.
> + */
> +int usb_add_function(struct usb_configuration *config,
> +		struct usb_function *function)
> +{
> +	int	value = -EINVAL;
> +
> +	debug("adding '%s'/%p to config '%s'/%p\n",
> +			function->name, function,
> +			config->label, config);
> +
> +	if (!function->set_alt || !function->disable)
> +		goto done;
> +
> +	function->config = config;
> +	list_add_tail(&function->list, &config->functions);
> +
> +	if (function->bind) {
> +		value = function->bind(config, function);
> +		if (value < 0) {
> +			list_del(&function->list);
> +			function->config = NULL;
> +		}
> +	} else
> +		value = 0;
> +
> +	if (!config->fullspeed && function->descriptors)
> +		config->fullspeed = 1;
> +	if (!config->highspeed && function->hs_descriptors)
> +		config->highspeed = 1;
> +
> +done:
> +	if (value)
> +		debug("adding '%s'/%p --> %d\n",
> +				function->name, function, value);
> +	return value;
> +}
> +
> +/**
> + * usb_function_deactivate - prevent function and gadget enumeration
> + * @function: the function that isn't yet ready to respond
> + *
> + * Blocks response of the gadget driver to host enumeration by
> + * preventing the data line pullup from being activated.  This is
> + * normally called during @bind() processing to change from the
> + * initial "ready to respond" state, or when a required resource
> + * becomes available.
> + *
> + * For example, drivers that serve as a passthrough to a userspace
> + * daemon can block enumeration unless that daemon (such as an OBEX,
> + * MTP, or print server) is ready to handle host requests.
> + *
> + * Not all systems support software control of their USB peripheral
> + * data pullups.
> + *
> + * Returns zero on success, else negative errno.
> + */
> +int usb_function_deactivate(struct usb_function *function)
> +{
> +	struct usb_composite_dev	*cdev = function->config->cdev;
> +	int				status = 0;
> +
> +	if (cdev->deactivations == 0)
> +		status = usb_gadget_disconnect(cdev->gadget);
> +	if (status == 0)
> +		cdev->deactivations++;
> +
> +	return status;
> +}
> +
> +/**
> + * usb_function_activate - allow function and gadget enumeration
> + * @function: function on which usb_function_activate() was called
> + *
> + * Reverses effect of usb_function_deactivate().  If no more functions
> + * are delaying their activation, the gadget driver will respond to
> + * host enumeration procedures.
> + *
> + * Returns zero on success, else negative errno.
> + */
> +int usb_function_activate(struct usb_function *function)
> +{
> +	struct usb_composite_dev	*cdev = function->config->cdev;
> +	int				status = 0;
> +
> +	if (cdev->deactivations == 0) {
> +		printf("WARNING in %s line %d\n", __FILE__, __LINE__);

This should be certainly more descriptive ;-)

> +		status = -EINVAL;
> +	} else {
> +		cdev->deactivations--;
> +		if (cdev->deactivations == 0)
> +			status = usb_gadget_connect(cdev->gadget);
> +	}
> +
> +	return status;
> +}
> +
> +/**
> + * usb_interface_id() - allocate an unused interface ID
> + * @config: configuration associated with the interface
> + * @function: function handling the interface
> + * Context: single threaded during gadget setup
> + *
> + * usb_interface_id() is called from usb_function.bind() callbacks to
> + * allocate new interface IDs.  The function driver will then store that
> + * ID in interface, association, CDC union, and other descriptors.  It
> + * will also handle any control requests targetted at that interface,
> + * particularly changing its altsetting via set_alt().  There may
> + * also be class-specific or vendor-specific requests to handle.
> + *
> + * All interface identifier should be allocated using this routine, to
> + * ensure that for example different functions don't wrongly assign
> + * different meanings to the same identifier.  Note that since interface
> + * identifers are configuration-specific, functions used in more than
> + * one configuration (or more than once in a given configuration) need
> + * multiple versions of the relevant descriptors.
> + *
> + * Returns the interface ID which was allocated; or -ENODEV if no
> + * more interface IDs can be allocated.
> + */
> +int usb_interface_id(struct usb_configuration *config,
> +		struct usb_function *function)
> +{
> +	unsigned id = config->next_interface_id;
> +
> +	if (id < MAX_CONFIG_INTERFACES) {
> +		config->interface[id] = function;
> +		config->next_interface_id = id + 1;
> +		return id;
> +	}
> +	return -ENODEV;
> +}
> +
> +static int config_buf(struct usb_configuration *config,
> +		enum usb_device_speed speed, void *buf, u8 type)
> +{
> +	struct usb_config_descriptor	*c = buf;
> +	void				*next = buf + USB_DT_CONFIG_SIZE;
> +	int				len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
> +	struct usb_function		*f;
> +	int				status;
> +
> +	/* write the config descriptor */
> +	c = buf;
> +	c->bLength = USB_DT_CONFIG_SIZE;
> +	c->bDescriptorType = type;
> +
> +	c->bNumInterfaces = config->next_interface_id;
> +	c->bConfigurationValue = config->bConfigurationValue;
> +	c->iConfiguration = config->iConfiguration;
> +	c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
> +	c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
> +
> +	/* There may be e.g. OTG descriptors */
> +	if (config->descriptors) {
> +		status = usb_descriptor_fillbuf(next, len,
> +				config->descriptors);
> +		if (status < 0)
> +			return status;
> +		len -= status;
> +		next += status;
> +	}
> +
> +	/* add each function's descriptors */
> +	list_for_each_entry(f, &config->functions, list) {
> +		struct usb_descriptor_header **descriptors;

Please define all variables at the begining.

> +
> +		if (speed == USB_SPEED_HIGH)
> +			descriptors = f->hs_descriptors;
> +		else
> +			descriptors = f->descriptors;
> +		if (!descriptors)
> +			continue;
> +		status = usb_descriptor_fillbuf(next, len,
> +			(const struct usb_descriptor_header **) descriptors);
> +		if (status < 0)
> +			return status;
> +		len -= status;
> +		next += status;
> +	}
> +
> +	len = next - buf;
> +	c->wTotalLength = cpu_to_le16(len);
> +	return len;
> +}
> +
> +static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
> +{
> +	struct usb_gadget		*gadget = cdev->gadget;
> +	struct usb_configuration	*c;
> +	u8				type = w_value >> 8;
> +	enum usb_device_speed		speed = USB_SPEED_UNKNOWN;
> +
> +	if (gadget_is_dualspeed(gadget)) {
> +		int			hs = 0;
> +
> +		if (gadget->speed == USB_SPEED_HIGH)
> +			hs = 1;
> +		if (type == USB_DT_OTHER_SPEED_CONFIG)
> +			hs = !hs;
> +		if (hs)
> +			speed = USB_SPEED_HIGH;
> +
> +	}
> +
> +	w_value &= 0xff;
> +	list_for_each_entry(c, &cdev->configs, list) {
> +		if (speed == USB_SPEED_HIGH) {
> +			if (!c->highspeed)
> +				continue;
> +		} else {
> +			if (!c->fullspeed)
> +				continue;
> +		}
> +		if (w_value == 0)
> +			return config_buf(c, speed, cdev->req->buf, type);
> +		w_value--;
> +	}
> +	return -EINVAL;
> +}
> +
> +static int count_configs(struct usb_composite_dev *cdev, unsigned type)
> +{
> +	struct usb_gadget		*gadget = cdev->gadget;
> +	struct usb_configuration	*c;
> +	unsigned			count = 0;
> +	int				hs = 0;
> +
> +	if (gadget_is_dualspeed(gadget)) {
> +		if (gadget->speed == USB_SPEED_HIGH)
> +			hs = 1;
> +		if (type == USB_DT_DEVICE_QUALIFIER)
> +			hs = !hs;
> +	}
> +	list_for_each_entry(c, &cdev->configs, list) {
> +		/* ignore configs that won't work at this speed */
> +		if (hs) {
> +			if (!c->highspeed)
> +				continue;
> +		} else {
> +			if (!c->fullspeed)
> +				continue;
> +		}
> +		count++;
> +	}
> +	return count;
> +}
> +
> +static void device_qual(struct usb_composite_dev *cdev)
> +{
> +	struct usb_qualifier_descriptor	*qual = cdev->req->buf;
> +
> +	qual->bLength = sizeof(*qual);
> +	qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
> +	/* POLICY: same bcdUSB and device type info at both speeds */
> +	qual->bcdUSB = cdev->desc.bcdUSB;
> +	qual->bDeviceClass = cdev->desc.bDeviceClass;
> +	qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
> +	qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
> +	/* ASSUME same EP0 fifo size at both speeds */
> +	qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0;
> +	qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
> +	qual->bRESERVED = 0;
> +}
> +
> +static void reset_config(struct usb_composite_dev *cdev)
> +{
> +	struct usb_function		*f;
> +
> +	debug("%s:\n", __func__);
> +
> +	list_for_each_entry(f, &cdev->config->functions, list) {
> +		if (f->disable)
> +			f->disable(f);
> +
> +		bitmap_zero(f->endpoints, 32);
> +	}
> +	cdev->config = NULL;
> +}
> +
> +static int set_config(struct usb_composite_dev *cdev,
> +		const struct usb_ctrlrequest *ctrl, unsigned number)
> +{
> +	struct usb_gadget	*gadget = cdev->gadget;
> +	struct usb_configuration *c = NULL;
> +	int			result = -EINVAL;
> +	unsigned		power = gadget_is_otg(gadget) ? 8 : 100;
> +	int			tmp;
> +
> +	if (cdev->config)
> +		reset_config(cdev);
> +
> +	if (number) {
> +		list_for_each_entry(c, &cdev->configs, list) {
> +			if (c->bConfigurationValue == number) {
> +				result = 0;
> +				break;
> +			}
> +		}
> +		if (result < 0)
> +			goto done;
> +	} else
> +		result = 0;
> +
> +	debug("%s: %s speed config #%d: %s\n", __func__,
> +	     ({ char *speed;
> +		     switch (gadget->speed) {
> +		     case USB_SPEED_LOW:
> +			     speed = "low";
> +			     break;
> +		     case USB_SPEED_FULL:
> +			     speed = "full";
> +			     break;
> +		     case USB_SPEED_HIGH:
> +			     speed = "high";
> +			     break;
> +		     default:
> +			     speed = "?";
> +			     break;
> +		     };
> +		     speed;
> +	     }), number, c ? c->label : "unconfigured");
> +
> +	if (!c)
> +		goto done;
> +
> +	cdev->config = c;
> +
> +	/* Initialize all interfaces by setting them to altsetting zero. */
> +	for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
> +		struct usb_function	*f = c->interface[tmp];
> +		struct usb_descriptor_header **descriptors;
> +
> +		if (!f)
> +			break;
> +
> +		/*
> +		 * Record which endpoints are used by the function. This is used
> +		 * to dispatch control requests targeted at that endpoint to the
> +		 * function's setup callback instead of the current
> +		 * configuration's setup callback.
> +		 */
> +		if (gadget->speed == USB_SPEED_HIGH)
> +			descriptors = f->hs_descriptors;
> +		else
> +			descriptors = f->descriptors;
> +
> +		for (; *descriptors; ++descriptors) {
> +			struct usb_endpoint_descriptor *ep;
> +			int addr;
> +
> +			if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
> +				continue;
> +
> +			ep = (struct usb_endpoint_descriptor *)*descriptors;
> +			addr = ((ep->bEndpointAddress & 0x80) >> 3)
> +			     |	(ep->bEndpointAddress & 0x0f);
> +			__set_bit(addr, f->endpoints);
> +		}
> +
> +		result = f->set_alt(f, tmp, 0);
> +		if (result < 0) {
> +			debug("interface %d (%s/%p) alt 0 --> %d\n",
> +					tmp, f->name, f, result);
> +
> +			reset_config(cdev);
> +			goto done;
> +		}
> +	}
> +
> +	/* when we return, be sure our power usage is valid */
> +	power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
> +done:
> +	usb_gadget_vbus_draw(gadget, power);
> +	return result;
> +}
> +
> +/**
> + * usb_add_config() - add a configuration to a device.
> + * @cdev: wraps the USB gadget
> + * @config: the configuration, with bConfigurationValue assigned
> + * Context: single threaded during gadget setup
> + *
> + * One of the main tasks of a composite driver's bind() routine is to
> + * add each of the configurations it supports, using this routine.
> + *
> + * This function returns the value of the configuration's bind(), which
> + * is zero for success else a negative errno value.  Binding
> configurations + * assigns global resources including string IDs, and
> per-configuration + * resources such as interface IDs and endpoints.
> + */
> +int usb_add_config(struct usb_composite_dev *cdev,
> +		struct usb_configuration *config)
> +{
> +	int				status = -EINVAL;
> +	struct usb_configuration	*c;
> +
> +	debug("%s: adding config #%u '%s'/%p\n", __func__,
> +			config->bConfigurationValue,
> +			config->label, config);
> +
> +	if (!config->bConfigurationValue || !config->bind)
> +		goto done;
> +
> +	/* Prevent duplicate configuration identifiers */
> +	list_for_each_entry(c, &cdev->configs, list) {
> +		if (c->bConfigurationValue == config->bConfigurationValue) {
> +			status = -EBUSY;
> +			goto done;
> +		}
> +	}
> +
> +	config->cdev = cdev;
> +	list_add_tail(&config->list, &cdev->configs);
> +
> +	INIT_LIST_HEAD(&config->functions);
> +	config->next_interface_id = 0;
> +
> +	status = config->bind(config);
> +	if (status < 0) {
> +		list_del(&config->list);
> +		config->cdev = NULL;
> +	} else {
> +		unsigned	i;
> +
> +		debug("cfg %d/%p speeds:%s%s\n",
> +			config->bConfigurationValue, config,
> +			config->highspeed ? " high" : "",
> +			config->fullspeed
> +				? (gadget_is_dualspeed(cdev->gadget)
> +					? " full"
> +					: " full/low")
> +				: "");
> +
> +		for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
> +			struct usb_function	*f = config->interface[i];
> +
> +			if (!f)
> +				continue;
> +			debug("%s: interface %d = %s/%p\n",
> +			      __func__, i, f->name, f);
> +		}
> +	}
> +
> +	usb_ep_autoconfig_reset(cdev->gadget);
> +
> +done:
> +	if (status)
> +		debug("added config '%s'/%u --> %d\n", config->label,
> +				config->bConfigurationValue, status);
> +	return status;
> +}
> +
> +/*
> + * We support strings in multiple languages ... string descriptor zero
> + * says which languages are supported.	The typical case will be that
> + * only one language (probably English) is used, with I18N handled on
> + * the host side.
> + */
> +
> +static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
> +{
> +	const struct usb_gadget_strings	*s;
> +	u16				language;
> +	__le16				*tmp;
> +
> +	while (*sp) {
> +		s = *sp;
> +		language = cpu_to_le16(s->language);
> +		for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
> +			if (*tmp == language)
> +				goto repeat;
> +		}
> +		*tmp++ = language;
> +repeat:
> +		sp++;
> +	}
> +}
> +
> +static int lookup_string(
> +	struct usb_gadget_strings	**sp,
> +	void				*buf,
> +	u16				language,
> +	int				id
> +)
> +{
> +	struct usb_gadget_strings	*s;
> +	int				value;
> +
> +	while (*sp) {
> +		s = *sp++;
> +		if (s->language != language)
> +			continue;
> +		value = usb_gadget_get_string(s, id, buf);
> +		if (value > 0)
> +			return value;
> +	}
> +	return -EINVAL;
> +}
> +
> +static int get_string(struct usb_composite_dev *cdev,
> +		void *buf, u16 language, int id)
> +{
> +	struct usb_configuration	*c;
> +	struct usb_function		*f;
> +	int				len;
> +
> +	/*
> +	 * Yes, not only is USB's I18N support probably more than most
> +	 * folk will ever care about ... also, it's all supported here.
> +	 * (Except for UTF8 support for Unicode's "Astral Planes".)
> +	 */
> +
> +	/* 0 == report all available language codes */
> +	if (id == 0) {
> +		struct usb_string_descriptor	*s = buf;
> +		struct usb_gadget_strings	**sp;
> +
> +		memset(s, 0, 256);
> +		s->bDescriptorType = USB_DT_STRING;
> +
> +		sp = composite->strings;
> +		if (sp)
> +			collect_langs(sp, s->wData);
> +
> +		list_for_each_entry(c, &cdev->configs, list) {
> +			sp = c->strings;
> +			if (sp)
> +				collect_langs(sp, s->wData);
> +
> +			list_for_each_entry(f, &c->functions, list) {
> +				sp = f->strings;
> +				if (sp)
> +					collect_langs(sp, s->wData);
> +			}
> +		}
> +
> +		for (len = 0; len <= 126 && s->wData[len]; len++)
> +			continue;
> +		if (!len)
> +			return -EINVAL;
> +
> +		s->bLength = 2 * (len + 1);
> +		return s->bLength;
> +	}
> +
> +	/*
> +	 * Otherwise, look up and return a specified string.  String IDs
> +	 * are device-scoped, so we look up each string table we're told
> +	 * about.  These lookups are infrequent; simpler-is-better here.
> +	 */
> +	if (composite->strings) {
> +		len = lookup_string(composite->strings, buf, language, id);
> +		if (len > 0)
> +			return len;
> +	}
> +	list_for_each_entry(c, &cdev->configs, list) {
> +		if (c->strings) {
> +			len = lookup_string(c->strings, buf, language, id);
> +			if (len > 0)
> +				return len;
> +		}
> +		list_for_each_entry(f, &c->functions, list) {
> +			if (!f->strings)
> +				continue;
> +			len = lookup_string(f->strings, buf, language, id);
> +			if (len > 0)
> +				return len;
> +		}
> +	}
> +	return -EINVAL;
> +}
> +
> +/**
> + * usb_string_id() - allocate an unused string ID
> + * @cdev: the device whose string descriptor IDs are being allocated
> + * Context: single threaded during gadget setup
> + *
> + * @usb_string_id() is called from bind() callbacks to allocate
> + * string IDs.	Drivers for functions, configurations, or gadgets will
> + * then store that ID in the appropriate descriptors and string table.
> + *
> + * All string identifier should be allocated using this,
> + * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
> + * that for example different functions don't wrongly assign different
> + * meanings to the same identifier.
> + */
> +int usb_string_id(struct usb_composite_dev *cdev)
> +{
> +	if (cdev->next_string_id < 254) {
> +		/*
> +		 * string id 0 is reserved by USB spec for list of
> +		 * supported languages
> +		 * 255 reserved as well? -- mina86
> +		 */
> +		cdev->next_string_id++;
> +		return cdev->next_string_id;
> +	}
> +	return -ENODEV;
> +}
> +
> +/**
> + * usb_string_ids() - allocate unused string IDs in batch
> + * @cdev: the device whose string descriptor IDs are being allocated
> + * @str: an array of usb_string objects to assign numbers to
> + * Context: single threaded during gadget setup
> + *
> + * @usb_string_ids() is called from bind() callbacks to allocate
> + * string IDs.	Drivers for functions, configurations, or gadgets will
> + * then copy IDs from the string table to the appropriate descriptors
> + * and string table for other languages.
> + *
> + * All string identifier should be allocated using this,
> + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
> + * example different functions don't wrongly assign different meanings
> + * to the same identifier.
> + */
> +int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string
> *str) +{
> +	int next = cdev->next_string_id;
> +
> +	for (; str->s; ++str) {
> +		if (next >= 254)
> +			return -ENODEV;
> +		str->id = ++next;
> +	}
> +
> +	cdev->next_string_id = next;
> +
> +	return 0;
> +}
> +
> +/**
> + * usb_string_ids_n() - allocate unused string IDs in batch
> + * @c: the device whose string descriptor IDs are being allocated
> + * @n: number of string IDs to allocate
> + * Context: single threaded during gadget setup
> + *
> + * Returns the first requested ID.  This ID and next @n-1 IDs are now
> + * valid IDs.  At least provided that @n is non-zero because if it
> + * is, returns last requested ID which is now very useful information.
> + *
> + * @usb_string_ids_n() is called from bind() callbacks to allocate
> + * string IDs.	Drivers for functions, configurations, or gadgets will
> + * then store that ID in the appropriate descriptors and string table.
> + *
> + * All string identifier should be allocated using this,
> + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
> + * example different functions don't wrongly assign different meanings
> + * to the same identifier.
> + */
> +int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
> +{
> +	unsigned next = c->next_string_id;
> +	if (n > 254 || (unsigned)next + n > 254)

Why the cast here? Fix also in linux?

> +		return -ENODEV;
> +	c->next_string_id += n;
> +	return next + 1;
> +}
> +
> +static void composite_setup_complete(struct usb_ep *ep, struct usb_request
> *req) +{
> +	if (req->status || req->actual != req->length)
> +		debug("%s: setup complete --> %d, %d/%d\n", __func__,
> +				req->status, req->actual, req->length);
> +}
> +
> +/*
> + * The setup() callback implements all the ep0 functionality that's
> + * not handled lower down, in hardware or the hardware driver(like
> + * device and endpoint feature flags, and their status).  It's all
> + * housekeeping for the gadget function we're implementing.  Most of
> + * the work is in config and function specific setup.
> + */
> +static int
> +composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest
> *ctrl) +{
> +	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
> +	struct usb_request		*req = cdev->req;
> +	int				value = -EOPNOTSUPP;
> +	u16				w_index = le16_to_cpu(ctrl->wIndex);
> +	u8				intf = w_index & 0xFF;
> +	u16				w_value = le16_to_cpu(ctrl->wValue);
> +	u16				w_length = le16_to_cpu(ctrl->wLength);
> +	struct usb_function		*f = NULL;
> +	u8				endp;
> +	int				standard;
> +
> +	/*
> +	 * partial re-init of the response message; the function or the
> +	 * gadget might need to intercept e.g. a control-OUT completion
> +	 * when we delegate to it.
> +	 */
> +	req->zero = 0;
> +	req->complete = composite_setup_complete;
> +	req->length = USB_BUFSIZ;
> +	gadget->ep0->driver_data = cdev;
> +	standard = (ctrl->bRequestType & USB_TYPE_MASK)
> +						== USB_TYPE_STANDARD;
> +	if (!standard)
> +		goto unknown;
> +
> +	switch (ctrl->bRequest) {
> +
> +	/* we handle all standard USB descriptors */
> +	case USB_REQ_GET_DESCRIPTOR:
> +		if (ctrl->bRequestType != USB_DIR_IN)
> +			goto unknown;
> +		switch (w_value >> 8) {
> +
> +		case USB_DT_DEVICE:
> +			cdev->desc.bNumConfigurations =
> +				count_configs(cdev, USB_DT_DEVICE);
> +			value = min(w_length, (u16) sizeof cdev->desc);
> +			memcpy(req->buf, &cdev->desc, value);
> +			break;
> +		case USB_DT_DEVICE_QUALIFIER:
> +			if (!gadget_is_dualspeed(gadget))
> +				break;
> +			device_qual(cdev);
> +			value = min_t(w_length,
> +				sizeof(struct usb_qualifier_descriptor));
> +			break;
> +		case USB_DT_OTHER_SPEED_CONFIG:
> +			if (!gadget_is_dualspeed(gadget))
> +				break;
> +
> +		case USB_DT_CONFIG:
> +			value = config_desc(cdev, w_value);
> +			if (value >= 0)
> +				value = min(w_length, (u16) value);
> +			break;
> +		case USB_DT_STRING:
> +			value = get_string(cdev, req->buf,
> +					w_index, w_value & 0xff);
> +			if (value >= 0)
> +				value = min(w_length, (u16) value);
> +			break;
> +		default:
> +			goto unknown;
> +		}
> +		break;
> +
> +	/* any number of configs can work */
> +	case USB_REQ_SET_CONFIGURATION:
> +		if (ctrl->bRequestType != 0)
> +			goto unknown;
> +		if (gadget_is_otg(gadget)) {
> +			if (gadget->a_hnp_support)
> +				debug("HNP available\n");
> +			else if (gadget->a_alt_hnp_support)
> +				debug("HNP on another port\n");
> +			else
> +				debug("HNP inactive\n");
> +		}
> +
> +		value = set_config(cdev, ctrl, w_value);
> +		break;
> +	case USB_REQ_GET_CONFIGURATION:
> +		if (ctrl->bRequestType != USB_DIR_IN)
> +			goto unknown;
> +		if (cdev->config)
> +			*(u8 *)req->buf = cdev->config->bConfigurationValue;
> +		else
> +			*(u8 *)req->buf = 0;
> +		value = min(w_length, (u16) 1);
> +		break;
> +
> +	/*
> +	 * function drivers must handle get/set altsetting; if there's
> +	 * no get() method, we know only altsetting zero works.
> +	 */
> +	case USB_REQ_SET_INTERFACE:
> +		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
> +			goto unknown;
> +		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
> +			break;
> +		f = cdev->config->interface[intf];
> +		if (!f)
> +			break;
> +		if (w_value && !f->set_alt)
> +			break;
> +		value = f->set_alt(f, w_index, w_value);
> +		break;
> +	case USB_REQ_GET_INTERFACE:
> +		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
> +			goto unknown;
> +		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
> +			break;
> +		f = cdev->config->interface[intf];
> +		if (!f)
> +			break;
> +		/* lots of interfaces only need altsetting zero... */
> +		value = f->get_alt ? f->get_alt(f, w_index) : 0;
> +		if (value < 0)
> +			break;
> +		*((u8 *)req->buf) = value;
> +		value = min(w_length, (u16) 1);
> +		break;
> +	default:
> +unknown:
> +		debug("non-core control req%02x.%02x v%04x i%04x l%d\n",
> +			ctrl->bRequestType, ctrl->bRequest,
> +			w_value, w_index, w_length);
> +
> +		/*
> +		 * functions always handle their interfaces and endpoints...
> +		 * punt other recipients (other, WUSB, ...) to the current
> +		 * configuration code.
> +		 */
> +		switch (ctrl->bRequestType & USB_RECIP_MASK) {
> +		case USB_RECIP_INTERFACE:
> +			f = cdev->config->interface[intf];
> +			break;
> +
> +		case USB_RECIP_ENDPOINT:
> +			endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
> +			list_for_each_entry(f, &cdev->config->functions, list) {
> +				if (test_bit(endp, f->endpoints))
> +					break;
> +			}
> +			if (&f->list == &cdev->config->functions)
> +				f = NULL;
> +			break;
> +		}
> +
> +		if (f && f->setup)
> +			value = f->setup(f, ctrl);
> +		else {
> +			struct usb_configuration	*c;
> +
> +			c = cdev->config;
> +			if (c && c->setup)
> +				value = c->setup(c, ctrl);
> +		}
> +
> +		goto done;
> +	}
> +
> +	/* respond with data transfer before status phase? */
> +	if (value >= 0) {
> +		req->length = value;
> +		req->zero = value < w_length;
> +		value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);

GFP_ATOMIC? In U-Boot?


> +		if (value < 0) {
> +			debug("ep_queue --> %d\n", value);
> +			req->status = 0;
> +			composite_setup_complete(gadget->ep0, req);
> +		}
> +	}
> +
> +done:
> +	/* device either stalls (value < 0) or reports success */
> +	return value;
> +}
> +
> +static void composite_disconnect(struct usb_gadget *gadget)
> +{
> +	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
> +
> +	if (cdev->config)
> +		reset_config(cdev);
> +	if (composite->disconnect)
> +		composite->disconnect(cdev);
> +}
> +
> +static void composite_unbind(struct usb_gadget *gadget)
> +{
> +	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
> +
> +	/*
> +	 * composite_disconnect() must already have been called
> +	 * by the underlying peripheral controller driver!
> +	 * so there's no i/o concurrency that could affect the
> +	 * state protected by cdev->lock.
> +	 */
> +	BUG_ON(cdev->config);
> +
> +	while (!list_empty(&cdev->configs)) {
> +		struct usb_configuration	*c;
> +
> +		c = list_first_entry(&cdev->configs,
> +				struct usb_configuration, list);
> +		while (!list_empty(&c->functions)) {
> +			struct usb_function		*f;
> +
> +			f = list_first_entry(&c->functions,
> +					struct usb_function, list);
> +			list_del(&f->list);
> +			if (f->unbind) {
> +				debug("unbind function '%s'/%p\n",
> +						f->name, f);
> +				f->unbind(c, f);
> +			}
> +		}
> +		list_del(&c->list);
> +		if (c->unbind) {
> +			debug("unbind config '%s'/%p\n", c->label, c);
> +			c->unbind(c);
> +		}
> +	}
> +	if (composite->unbind)
> +		composite->unbind(cdev);
> +
> +	if (cdev->req) {
> +		kfree(cdev->req->buf);
> +		usb_ep_free_request(gadget->ep0, cdev->req);
> +	}
> +	kfree(cdev);
> +	set_gadget_data(gadget, NULL);
> +
> +	composite = NULL;
> +}
> +
> +static int composite_bind(struct usb_gadget *gadget)
> +{
> +	struct usb_composite_dev	*cdev;
> +	int				status = -ENOMEM;
> +
> +	cdev = calloc(sizeof *cdev, 1);
> +	if (!cdev)
> +		return status;
> +
> +	cdev->gadget = gadget;
> +	set_gadget_data(gadget, cdev);
> +	INIT_LIST_HEAD(&cdev->configs);
> +
> +	/* preallocate control response and buffer */
> +	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
> +	if (!cdev->req)
> +		goto fail;
> +	cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
> +	if (!cdev->req->buf)
> +		goto fail;
> +	cdev->req->complete = composite_setup_complete;
> +	gadget->ep0->driver_data = cdev;
> +
> +	cdev->bufsiz = USB_BUFSIZ;
> +	cdev->driver = composite;
> +
> +	usb_gadget_set_selfpowered(gadget);
> +	usb_ep_autoconfig_reset(cdev->gadget);
> +
> +	status = composite->bind(cdev);
> +	if (status < 0)
> +		goto fail;
> +
> +	cdev->desc = *composite->dev;
> +	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
> +
> +	debug("%s: ready\n", composite->name);
> +	return 0;
> +
> +fail:
> +	composite_unbind(gadget);
> +	return status;
> +}
> +
> +static void
> +composite_suspend(struct usb_gadget *gadget)
> +{
> +	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
> +	struct usb_function		*f;
> +
> +	debug("%s: suspend\n", __func__);
> +	if (cdev->config) {
> +		list_for_each_entry(f, &cdev->config->functions, list) {
> +			if (f->suspend)
> +				f->suspend(f);
> +		}
> +	}
> +	if (composite->suspend)
> +		composite->suspend(cdev);
> +
> +	cdev->suspended = 1;
> +}
> +
> +static void
> +composite_resume(struct usb_gadget *gadget)
> +{
> +	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
> +	struct usb_function		*f;
> +
> +	debug("%s: resume\n", __func__);
> +	if (composite->resume)
> +		composite->resume(cdev);
> +	if (cdev->config) {
> +		list_for_each_entry(f, &cdev->config->functions, list) {
> +			if (f->resume)
> +				f->resume(f);
> +		}
> +	}
> +
> +	cdev->suspended = 0;
> +}
> +
> +static struct usb_gadget_driver composite_driver = {
> +	.speed		= USB_SPEED_HIGH,
> +
> +	.bind		= composite_bind,
> +	.unbind         = composite_unbind,
> +
> +	.setup		= composite_setup,
> +	.disconnect	= composite_disconnect,
> +
> +	.suspend        = composite_suspend,
> +	.resume         = composite_resume,
> +};
> +
> +/**
> + * usb_composite_register() - register a composite driver
> + * @driver: the driver to register
> + * Context: single threaded during gadget setup
> + *
> + * This function is used to register drivers using the composite driver
> + * framework.  The return value is zero, or a negative errno value.
> + * Those values normally come from the driver's @bind method, which does
> + * all the work of setting up the driver to match the hardware.
> + *
> + * On successful return, the gadget is ready to respond to requests from
> + * the host, unless one of its components invokes usb_gadget_disconnect()
> + * while it was binding.  That would usually be done in order to wait for
> + * some userspace participation.
> + */
> +int usb_composite_register(struct usb_composite_driver *driver)
> +{
> +	if (!driver || !driver->dev || !driver->bind || composite)
> +		return -EINVAL;
> +
> +	if (!driver->name)
> +		driver->name = "composite";
> +	composite = driver;
> +
> +	return usb_gadget_register_driver(&composite_driver);
> +}
> +
> +/**
> + * usb_composite_unregister() - unregister a composite driver
> + * @driver: the driver to unregister
> + *
> + * This function is used to unregister drivers using the composite
> + * driver framework.
> + */
> +void usb_composite_unregister(struct usb_composite_driver *driver)
> +{
> +	if (composite != driver)
> +		return;
> +	usb_gadget_unregister_driver(&composite_driver);
> +}
> diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
> new file mode 100644
> index 0000000..53cb095
> --- /dev/null
> +++ b/include/linux/usb/composite.h
> @@ -0,0 +1,350 @@
> +/*
> + * composite.h -- framework for usb gadgets which are composite devices
> + *
> + * Copyright (C) 2006-2008 David Brownell
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 
> USA + */
> +
> +#ifndef	__LINUX_USB_COMPOSITE_H
> +#define	__LINUX_USB_COMPOSITE_H
> +
> +/*
> + * This framework is an optional layer on top of the USB Gadget interface,
> + * making it easier to build (a) Composite devices, supporting multiple
> + * functions within any single configuration, and (b) Multi-configuration
> + * devices, also supporting multiple functions but without necessarily
> + * having more than one function per configuration.
> + *
> + * Example:  a device with a single configuration supporting both network
> + * link and mass storage functions is a composite device.  Those functions
> + * might alternatively be packaged in individual configurations, but in
> + * the composite model the host can use both functions at the same time.
> + */
> +
> +#include <common.h>
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +#include <usb/lin_gadget_compat.h>
> +
> +struct usb_configuration;
> +
> +/**
> + * struct usb_function - describes one function of a configuration
> + * @name: For diagnostics, identifies the function.
> + * @strings: tables of strings, keyed by identifiers assigned during
> bind() + *	and by language IDs provided in control requests
> + * @descriptors: Table of full (or low) speed descriptors, using interface
> and + *	string identifiers assigned during @bind().  If this pointer is
> null, + *	the function will not be available at full speed (or at low
> speed). + * @hs_descriptors: Table of high speed descriptors, using
> interface and + *	string identifiers assigned during @bind().  If this
> pointer is null, + *	the function will not be available at high speed.
> + * @config: assigned when @usb_add_function() is called; this is the
> + *	configuration with which this function is associated.
> + * @bind: Before the gadget can register, all of its functions bind() to
> the + *	available resources including string and interface identifiers
> used + *	in interface or class descriptors; endpoints; I/O buffers; and 
so
> on. + * @unbind: Reverses @bind; called as a side effect of unregistering
> the + *	driver which added this function.
> + * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
> + *	initialize usb_ep.driver data at this time (when it is used).
> + *	Note that setting an interface to its current altsetting resets
> + *	interface state, and that all interfaces have a disabled state.
> + * @get_alt: Returns the active altsetting.  If this is not provided,
> + *	then only altsetting zero is supported.
> + * @disable: (REQUIRED) Indicates the function should be disabled. 
> Reasons + *	include host resetting or reconfiguring the gadget, and
> disconnection. + * @setup: Used for interface-specific control requests.
> + * @suspend: Notifies functions when the host stops sending USB traffic.
> + * @resume: Notifies functions when the host restarts USB traffic.
> + *
> + * A single USB function uses one or more interfaces, and should in most
> + * cases support operation at both full and high speeds.  Each function is
> + * associated by @usb_add_function() with a one configuration; that
> function + * causes @bind() to be called so resources can be allocated as
> part of + * setting up a gadget driver.  Those resources include
> endpoints, which + * should be allocated using @usb_ep_autoconfig().
> + *
> + * To support dual speed operation, a function driver provides descriptors
> + * for both high and full speed operation.  Except in rare cases that
> don't + * involve bulk endpoints, each speed needs different endpoint
> descriptors. + *
> + * Function drivers choose their own strategies for managing instance
> data. + * The simplest strategy just declares it "static', which means the
> function + * can only be activated once.  If the function needs to be
> exposed in more + * than one configuration at a given speed, it needs to
> support multiple + * usb_function structures (one for each configuration).
> + *
> + * A more complex strategy might encapsulate a @usb_function structure
> inside + * a driver-specific instance structure to allows multiple
> activations.  An + * example of multiple activations might be a CDC ACM
> function that supports + * two or more distinct instances within the same
> configuration, providing + * several independent logical data links to a
> USB host.
> + */
> +struct usb_function {
> +	const char			*name;
> +	struct usb_gadget_strings	**strings;
> +	struct usb_descriptor_header	**descriptors;
> +	struct usb_descriptor_header	**hs_descriptors;
> +
> +	struct usb_configuration	*config;
> +
> +	/* REVISIT:  bind() functions can be marked __init, which
> +	 * makes trouble for section mismatch analysis.  See if
> +	 * we can't restructure things to avoid mismatching.
> +	 * Related:  unbind() may kfree() but bind() won't...
> +	 */
> +
> +	/* configuration management:  bind/unbind */
> +	int			(*bind)(struct usb_configuration *,
> +					struct usb_function *);
> +	void			(*unbind)(struct usb_configuration *,
> +					struct usb_function *);
> +
> +	/* runtime state management */
> +	int			(*set_alt)(struct usb_function *,
> +					unsigned interface, unsigned alt);
> +	int			(*get_alt)(struct usb_function *,
> +					unsigned interface);
> +	void			(*disable)(struct usb_function *);
> +	int			(*setup)(struct usb_function *,
> +					const struct usb_ctrlrequest *);
> +	void			(*suspend)(struct usb_function *);
> +	void			(*resume)(struct usb_function *);
> +
> +	/* private: */
> +	/* internals */
> +	struct list_head		list;
> +	DECLARE_BITMAP(endpoints, 32);
> +};
> +
> +int usb_add_function(struct usb_configuration *, struct usb_function *);
> +
> +int usb_function_deactivate(struct usb_function *);
> +int usb_function_activate(struct usb_function *);
> +
> +int usb_interface_id(struct usb_configuration *, struct usb_function *);
> +
> +/**
> + * ep_choose - select descriptor endpoint at current device speed
> + * @g: gadget, connected and running at some speed
> + * @hs: descriptor to use for high speed operation
> + * @fs: descriptor to use for full or low speed operation
> + */
> +static inline struct usb_endpoint_descriptor *
> +ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
> +		struct usb_endpoint_descriptor *fs)
> +{
> +	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
> +		return hs;
> +	return fs;
> +}
> +
> +#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
> +
> +/**
> + * struct usb_configuration - represents one gadget configuration
> + * @label: For diagnostics, describes the configuration.
> + * @strings: Tables of strings, keyed by identifiers assigned during
> @bind() + *	and by language IDs provided in control requests.
> + * @descriptors: Table of descriptors preceding all function descriptors.
> + *	Examples include OTG and vendor-specific descriptors.
> + * @bind: Called from @usb_add_config() to allocate resources unique to
> this + *	configuration and to call @usb_add_function() for each function
> used. + * @unbind: Reverses @bind; called as a side effect of
> unregistering the + *	driver which added this configuration.
> + * @setup: Used to delegate control requests that aren't handled by
> standard + *	device infrastructure or directed at a specific interface.
> + * @bConfigurationValue: Copied into configuration descriptor.
> + * @iConfiguration: Copied into configuration descriptor.
> + * @bmAttributes: Copied into configuration descriptor.
> + * @bMaxPower: Copied into configuration descriptor.
> + * @cdev: assigned by @usb_add_config() before calling @bind(); this is
> + *	the device associated with this configuration.
> + *
> + * Configurations are building blocks for gadget drivers structured around
> + * function drivers.  Simple USB gadgets require only one function and one
> + * configuration, and handle dual-speed hardware by always providing the
> same + * functionality.  Slightly more complex gadgets may have more than
> one + * single-function configuration at a given speed; or have
> configurations + * that only work at one speed.
> + *
> + * Composite devices are, by definition, ones with configurations which
> + * include more than one function.
> + *
> + * The lifecycle of a usb_configuration includes allocation,
> initialization + * of the fields described above, and calling
> @usb_add_config() to set up + * internal data and bind it to a specific
> device.  The configuration's + * @bind() method is then used to initialize
> all the functions and then + * call @usb_add_function() for them.
> + *
> + * Those functions would normally be independant of each other, but that's
> + * not mandatory.  CDC WMC devices are an example where functions often
> + * depend on other functions, with some functions subsidiary to others.
> + * Such interdependency may be managed in any way, so long as all of the
> + * descriptors complete by the time the composite driver returns from
> + * its bind() routine.
> + */
> +struct usb_configuration {
> +	const char			*label;
> +	struct usb_gadget_strings	**strings;
> +	const struct usb_descriptor_header **descriptors;
> +
> +	/* REVISIT:  bind() functions can be marked __init, which
> +	 * makes trouble for section mismatch analysis.  See if
> +	 * we can't restructure things to avoid mismatching...
> +	 */
> +
> +	/* configuration management:  bind/unbind */
> +	int			(*bind)(struct usb_configuration *);
> +	void			(*unbind)(struct usb_configuration *);
> +	int			(*setup)(struct usb_configuration *,
> +					const struct usb_ctrlrequest *);
> +
> +	/* fields in the config descriptor */
> +	u8			bConfigurationValue;
> +	u8			iConfiguration;
> +	u8			bmAttributes;
> +	u8			bMaxPower;
> +
> +	struct usb_composite_dev	*cdev;
> +
> +	/* private: */
> +	/* internals */
> +	struct list_head	list;
> +	struct list_head	functions;
> +	u8			next_interface_id;
> +	unsigned		highspeed:1;
> +	unsigned		fullspeed:1;
> +	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
> +};
> +
> +int usb_add_config(struct usb_composite_dev *,
> +		struct usb_configuration *);
> +
> +/**
> + * struct usb_composite_driver - groups configurations into a gadget
> + * @name: For diagnostics, identifies the driver.
> + * @dev: Template descriptor for the device, including default device
> + *	identifiers.
> + * @strings: tables of strings, keyed by identifiers assigned during
> bind() + *	and language IDs provided in control requests
> + * @bind: (REQUIRED) Used to allocate resources that are shared across the
> + *	whole device, such as string IDs, and add its configurations using
> + *	@usb_add_config().  This may fail by returning a negative errno
> + *	value; it should return zero on successful initialization.
> + * @unbind: Reverses @bind(); called as a side effect of unregistering
> + *	this driver.
> + * @disconnect: optional driver disconnect method
> + * @suspend: Notifies when the host stops sending USB traffic,
> + *	after function notifications
> + * @resume: Notifies configuration when the host restarts USB traffic,
> + *	before function notifications
> + *
> + * Devices default to reporting self powered operation.  Devices which
> rely + * on bus powered operation should report this in their @bind()
> method. + *
> + * Before returning from @bind, various fields in the template descriptor
> + * may be overridden.  These include the idVendor/idProduct/bcdDevice
> values + * normally to bind the appropriate host side driver, and the
> three strings + * (iManufacturer, iProduct, iSerialNumber) normally used
> to provide user + * meaningful device identifiers.  (The strings will not
> be defined unless + * they are defined in @dev and @strings.)  The correct
> ep0 maxpacket size + * is also reported, as defined by the underlying
> controller driver. + */
> +struct usb_composite_driver {
> +	const char				*name;
> +	const struct usb_device_descriptor	*dev;
> +	struct usb_gadget_strings		**strings;
> +
> +	/* REVISIT:  bind() functions can be marked __init, which
> +	 * makes trouble for section mismatch analysis.  See if
> +	 * we can't restructure things to avoid mismatching...
> +	 */
> +
> +	int			(*bind)(struct usb_composite_dev *);
> +	int			(*unbind)(struct usb_composite_dev *);
> +
> +	void			(*disconnect)(struct usb_composite_dev *);
> +
> +	/* global suspend hooks */
> +	void			(*suspend)(struct usb_composite_dev *);
> +	void			(*resume)(struct usb_composite_dev *);
> +};
> +
> +extern int usb_composite_register(struct usb_composite_driver *);
> +extern void usb_composite_unregister(struct usb_composite_driver *);
> +
> +
> +/**
> + * struct usb_composite_device - represents one composite usb gadget
> + * @gadget: read-only, abstracts the gadget's usb peripheral controller
> + * @req: used for control responses; buffer is pre-allocated
> + * @bufsiz: size of buffer pre-allocated in @req
> + * @config: the currently active configuration
> + *
> + * One of these devices is allocated and initialized before the
> + * associated device driver's bind() is called.
> + *
> + * OPEN ISSUE:  it appears that some WUSB devices will need to be
> + * built by combining a normal (wired) gadget with a wireless one.
> + * This revision of the gadget framework should probably try to make
> + * sure doing that won't hurt too much.
> + *
> + * One notion for how to handle Wireless USB devices involves:
> + * (a) a second gadget here, discovery mechanism TBD, but likely
> + *     needing separate "register/unregister WUSB gadget" calls;
> + * (b) updates to usb_gadget to include flags "is it wireless",
> + *     "is it wired", plus (presumably in a wrapper structure)
> + *     bandgroup and PHY info;
> + * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
> + *     wireless-specific parameters like maxburst and maxsequence;
> + * (d) configurations that are specific to wireless links;
> + * (e) function drivers that understand wireless configs and will
> + *     support wireless for (additional) function instances;
> + * (f) a function to support association setup (like CBAF), not
> + *     necessarily requiring a wireless adapter;
> + * (g) composite device setup that can create one or more wireless
> + *     configs, including appropriate association setup support;
> + * (h) more, TBD.
> + */
> +struct usb_composite_dev {
> +	struct usb_gadget		*gadget;
> +	struct usb_request		*req;
> +	unsigned			bufsiz;
> +
> +	struct usb_configuration	*config;
> +
> +	/* private: */
> +	/* internals */
> +	unsigned int			suspended:1;
> +	struct usb_device_descriptor	desc;
> +	struct list_head		configs;
> +	struct usb_composite_driver	*driver;
> +	u8				next_string_id;
> +
> +	/* the gadget driver won't enable the data pullup
> +	 * while the deactivation count is nonzero.
> +	 */
> +	unsigned			deactivations;
> +};
> +
> +extern int usb_string_id(struct usb_composite_dev *c);
> +extern int usb_string_ids_tab(struct usb_composite_dev *c,
> +			      struct usb_string *str);
> +extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
> +
> +#endif	/* __LINUX_USB_COMPOSITE_H */
> diff --git a/include/usb/lin_gadget_compat.h
> b/include/usb/lin_gadget_compat.h index fce3be7..01c576a 100644
> --- a/include/usb/lin_gadget_compat.h
> +++ b/include/usb/lin_gadget_compat.h
> @@ -36,8 +36,8 @@
>  #define mutex_lock(...)
>  #define mutex_unlock(...)
> 
> -#define WARN_ON(x) if (x) {printf("WARNING in %s line %d\n" \
> -				  , __FILE__, __LINE__); }
> +#define WARN_ON(x) do { if (x) printf("WARNING in %s line %d\n"	  \
> +				      , __FILE__, __LINE__); } while (0)
> 
>  #define KERN_WARNING
>  #define KERN_ERR
> @@ -45,6 +45,7 @@
>  #define KERN_DEBUG
> 
>  #define GFP_KERNEL	0
> +#define GFP_ATOMIC	0
> 
>  #define IRQ_HANDLED	1
> 
> @@ -56,6 +57,26 @@
> 
>  #define __iomem
>  #define min_t min
> +
> +#define BITS_PER_BYTE				8
> +#define BITS_TO_LONGS(nr) \
> +	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
> +#define DECLARE_BITMAP(name, bits) \
> +	unsigned long name[BITS_TO_LONGS(bits)]
> +
> +#define small_const_nbits(nbits) \
> +	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
> +
> +static inline void bitmap_zero(unsigned long *dst, int nbits)
> +{
> +	if (small_const_nbits(nbits))
> +		*dst = 0UL;
> +	else {
> +		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
> +		memset(dst, 0, len);
> +	}
> +}
> +
>  #define dma_cache_maint(addr, size, mode) cache_flush()
>  void cache_flush(void);


More information about the U-Boot mailing list