[U-Boot] [PATCH 8/9] imx: nand: Don't invent new configuration variable

Timo Ketola timo at exertus.fi
Fri Apr 13 13:21:00 CEST 2012


There is already CONFIG_SYS_NAND_BASE (or CONFIG_SYS_NAND_BASE_LIST) which
must be defined for nand.c. Use that. nand.c sets IO_ADDR_R with that.

Signed-off-by: Timo Ketola <timo at exertus.fi>
---
 drivers/mtd/nand/mxc_nand.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 73813a2..fcee20d 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1361,7 +1361,7 @@ int board_nand_init(struct nand_chip *this)
 	this->read_buf = mxc_nand_read_buf;
 	this->verify_buf = mxc_nand_verify_buf;
 
-	host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+	host->regs = this->IO_ADDR_R;
 	host->clk_act = 1;
 
 #ifdef CONFIG_MXC_NAND_HWECC
-- 
1.7.5.4



More information about the U-Boot mailing list