[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port

Stefano Babic sbabic at denx.de
Fri Apr 20 09:42:46 CEST 2012


On 20/04/2012 00:42, Tom Rini wrote:
> On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote:
>> This is just a patch for the problem reported here:
>> http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
>>
>> "Looks like this is copy paste error from my side,(for port2/3 it should have been bypass
>>  for port2/3 rather its port1 set in bypass mode)"
>>
>> I only submit the patch since it is missing in 2012.04-rc3 while the twister board
>> depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
>>
>> note: the twister boards still needs an additional `usb reset`, don't know why.
> 
> 
> I don't see any difference between the first usb start and the following
> resets, should there have been?  Clearly, there's a problem, but lets
> see if we can fix all of it in time..  Thanks!

The issue was raised during the review of Govindraj's patch, it seems
the wrong version was picked up.

Acked-by : Stefano Babic <sbabic at denx.de>

Can you apply it for the release (this is clearly a fix) ?

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list