[U-Boot] [REFERENCE DON'T APPLY 1/3] dfu: Add default value for bwPollTimeout

[Stefan Schmidt]

Hello.

On Mon, 2012-04-23 at 09:27, Lukasz Majewski wrote:
> > > 
> > > On Fri, 2012-04-06 at 15:06, Marek Vasut wrote:
> > > > > On Thursday 05 April 2012 20:18:16 Marek Vasut wrote:
> > > > > > What do you expect from me to tell you about this patch? Or
> > > > > > do you expect someone else to comment on this?
> > > > > 
> > > > > he mentioned in the summary of the series.  he's run out of
> > > > > time, so he's dumping his WIP state in case someone else picks
> > > > > it up.
> > > > 
> > > > "Re: [U-Boot] [PATCH 2/4] dfu: generic backend parts" this
> > > > summary? I see, didn't notice it, but just read it.
> > > > 
> > > > Stefan, thanks for your work, I hope you'll be back eventually :)
> > > 
> > > Time will tell. I still think its a worthwhile feature. I just need
> > > to find some time, motivation and hardware to work on it again.
> > > Will take at leats a couple of months though before I would start
> > > anything. Just relocated to another country and still in need for a
> > > flat to rent and sort out life and work. :)
> > 
> > Good luck on that :-)
> > 
> 
> I'm working on the composite gadget (as Marek know already :-)).
> On top of the g_dnl USB composite download driver it is possible to lay
> down the DFU function. 

Yeah, I have seen this patches. That is all fine with me. I'm not
bound to my patches at all. Having DFU in u-boot mainline is the goal.
:)

One of the problems I had was that I did not have hardware with a UDC
driver that is compatible with new gadget layer from the kernel ported
to u-boot. I agree that its the way to go to have composite and more
but it is quite hard to test against when only some drivers are
supporting it. The Beagleboard I used for most of the tests was still
using the musb driver with some glue and does not support it for
example.

That should not be a problem on your side as all Samsung UDCs are
written for the new gadget framework anyway.

> Actualy we (I mean Andrzej Pietrasiewicz and me), have managed to
> provide some proof-of-concept DFU code running with g_dnl driver (both
> DFU + THOR). Unfortunately this code is not yet "finished" and THOR
> protocol support has higher priority now.
> 
> When we post DFU patches we will add you guys on the Cc.

Thanks.

regards
Stefan Schmidt