[U-Boot] [PATCH V4 6/8] imx: usb: There is no such register

[Timo Ketola]

The reference manual of i.MX25 (nor i.MX31) does not define such
register. This seems to access read only UH2_CAPLENGTH register (if
CONFIG_MXC_USB_PORT is zero).

Signed-off-by: Timo Ketola <timo at exertus.fi>
---

Changes in v4:
- Rewrapped commit message

Changes in v2:
- New patch in this series

 drivers/usb/host/ehci-mxc.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 7384580..45cbd18 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -125,8 +125,6 @@ int ehci_hcd_init(void)
 	hcor = (struct ehci_hcor *)((uint32_t) hccr +
 			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 	setbits_le32(&ehci->usbmode, CM_HOST);
-	setbits_le32(&ehci->control, USB_EN);
-
 	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 
-- 
1.7.5.4